Altoparlante, preferibilmente USB (vedi la sezione USB consigliata)
o jack da 3,5 mm)
Una scheda SD con NOOBS
sono preinstallate. NOOBS è un programma di installazione del sistema operativo che contiene Raspbian per impostazione predefinita
e semplifica la configurazione del sistema operativo.
Ti consigliamo inoltre di avere una tastiera USB, un mouse USB e un monitor con
Cavo HDMI. che semplificano la configurazione iniziale dell'hardware (sono necessarie per
installare NOOBS).
Ora dovrai configurare l'hardware e configurare l'accesso alla rete.
Collegare l'hardware e configurare l'accesso alla rete
Collega il microfono e l'altoparlante al Raspberry Pi.
Inserisci la scheda SD nel Raspberry Pi (con NOOBS o Raspbian con
Desktop già caricato).
Collega una tastiera USB, un mouse USB e un monitor HDMI al tuo Raspberry Pi. Se
Non li hai, puoi sempre
connettersi a Pi da remoto.
Dopo aver configurato l'accesso, puoi connetterti al Raspberry Pi tramite SSH.
(facoltativo)
Configura data e ora
Verifica che data e ora siano impostate correttamente sul dispositivo.
date
(Facoltativo) Connettiti al Raspberry Pi tramite SSH
Per eseguire comandi su Raspberry Pi, devi aprire il terminale
sul dispositivo o utilizzare una connessione SSH. Devi utilizzare una connessione SSH
di sviluppo se non hai collegato un monitor, una tastiera e un mouse
al Raspberry Pi.
Su Raspbian, la password predefinita per l'utente pi è raspberry. Dovresti
cambia subito questa password (esegui passwd in un terminale su Pi).
Usa il terminale o la sessione SSH che hai configurato in questo passaggio per accedere alla
di questa guida. La directory di lavoro per entrambi è
/home/pi.
[null,null,["Ultimo aggiornamento 2025-07-25 UTC."],[[["\u003cp\u003eThis guide details setting up a Raspberry Pi (3/Zero/Zero W) with audio input/output for a project.\u003c/p\u003e\n"],["\u003cp\u003eYou will need a Raspberry Pi, microphone, speaker, SD card (with NOOBS or Raspbian), and optionally a monitor, keyboard, and mouse for initial setup.\u003c/p\u003e\n"],["\u003cp\u003eThe guide involves configuring hardware, network access, date/time, and potentially connecting via SSH for remote access.\u003c/p\u003e\n"],["\u003cp\u003eEnsure your Raspberry Pi's SSH is enabled for remote command execution if not using a directly connected monitor, keyboard, and mouse.\u003c/p\u003e\n"],["\u003cp\u003eFollowing setup, the next step involves configuring and testing the audio functionality.\u003c/p\u003e\n"]]],["Users need a Raspberry Pi (3 or Zero), power supply, USB microphone, and speaker. An SD card with NOOBS or Raspbian is essential. Connect the hardware: microphone, speaker, and SD card to the Raspberry Pi. Additionally, plug in a USB keyboard, mouse, and HDMI monitor (optional). Connect to the network, and check/correct the date and time. Optionally, enable and connect via SSH using the default credentials (change the password). All subsequent terminal commands should be entered in the /home/pi directory.\n"],null,["# Set Up Hardware and Network Access\n\nThe content on this page is hardware-dependent. Please select from the following: \nRaspberry Pi 3 Other platforms\nBefore you begin, you'll need the following components:\n\n\u003cbr /\u003e\n\n- Raspberry Pi 3 Model B and power supply (see [recommended kit](https://www.adafruit.com/products/3334))\n\n\n | **Note:** You can also use a Raspberry Pi Zero (or Zero W).\n\n \u003cbr /\u003e\n\n- USB microphone (see [recommended](https://www.adafruit.com/product/3367))\n\n- Speaker, preferably USB (see recommended [USB](https://www.adafruit.com/products/3369)\n or [3.5mm-jack](https://www.sparkfun.com/products/14023))\n\n- An SD card with [NOOBS](https://www.raspberrypi.org/downloads/noobs/)\n pre-installed. NOOBS is an OS installer that contains Raspbian by default\n and simplifies OS setup.\n\n | **Note:** You can also [download Raspbian](https://www.raspberrypi.org/downloads/raspbian/) and [write](https://www.raspberrypi.org/documentation/installation/installing-images/linux.md) it to the SD card yourself.\n- You may also want to have a USB keyboard, USB mouse, and a monitor with an\n HDMI cable. These simplify initial hardware setup (and are required to\n install NOOBS).\n\nYou'll now set up the hardware and configure network access.\n\nConnect the hardware and configure network access\n-------------------------------------------------\n\n1. Connect the microphone and speaker to the Raspberry Pi.\n2. Insert the SD card into the Raspberry Pi (with NOOBS or Raspbian with Desktop already loaded).\n3. Connect a USB keyboard, USB mouse and HDMI monitor to your Raspberry Pi. If you don't have these, you can always [connect to the Pi remotely](/assistant/sdk/guides/service/python/embed/setup-headless).\n4. Plug in an ethernet cable or [connect to a Wi-Fi\n network](https://www.raspberrypi.org/documentation/configuration/wireless/desktop.md).\n\nAfter you configure access, you can connect to the Raspberry Pi via [SSH](#ssh)\n(optional).\n\nConfigure the date and time\n---------------------------\n\nCheck that the date and time are set correctly on the device. \n\n```\ndate\n```\n| **Note:** An incorrect date or time may cause SSL errors. Restart the device to automatically set the correct date and time from a time server or use the `date --s=\u003cSTRING\u003e` command to set them manually.\n\nConnect to the Raspberry Pi via SSH (Optional)\n----------------------------------------------\n\nTo run commands on the Raspberry Pi, you need to open the [terminal](https://www.raspberrypi.org/documentation/usage/terminal/)\non the device or use an SSH connection. You must use an SSH connection from your\ndevelopment machine if you do not have a monitor, keyboard, and mouse connected\nto the Raspberry Pi.\n\nMake sure [SSH is enabled](https://www.raspberrypi.org/documentation/remote-access/ssh/README.md)\non the Raspberry Pi. \n\n```\nssh pi@raspberry-pi-ip-address\n``` \n\n```\npassword: password-for-raspberry-pi\n```\n\nFor example: \n\n```\n$ ssh pi@192.168.1.101\npassword: raspberry\n```\n\nOn Raspbian, the default password for the `pi` user is `raspberry`. You should\nchange this password immediately (run `passwd` in a terminal on the Pi).\n\nUse the terminal or the SSH session you set up in this step to enter the\ncommands in the rest of this guide. The working directory for both is\n`/home/pi`.\n\nNext step\n---------\n\n[Configure and Test the Audio](/assistant/sdk/guides/service/python/embed/audio)"]]
