เอกสารนี้อธิบายวิธีสร้างการเดินทางแบบรวมกลุ่มที่ใช้ร่วมกัน ตั้งค่าฟิลด์ที่ถูกต้อง และกำหนดให้ยานพาหนะเพื่อดำเนินการ โดยเราจะถือว่าคุณได้ตั้งค่า Fleet Engine แล้ว สร้างยานพาหนะ มีแอปคนขับที่ใช้งานได้ และมีแอปสำหรับผู้บริโภค (ไม่บังคับ) นอกจากนี้ คุณควรคุ้นเคยกับสถานการณ์การเดินทางต่างๆ ที่มีให้สำหรับการเดินทางแบบออนดีมานด์ด้วย ดูคำแนะนำที่เกี่ยวข้องต่อไปนี้สำหรับ เรื่องดังกล่าว
- ตั้งค่า Fleet Engine
- สร้างยานพาหนะ
- สถานการณ์การเดินทางในภาพรวมการเดินทางแบบออนดีมานด์
ข้อมูลเบื้องต้นเกี่ยวกับการสร้างการเดินทาง
ส่วนนี้อธิบายรายละเอียดคำขอที่จำเป็นสำหรับการสร้างการเดินทางใน Fleet Engine คุณส่งคำขอสร้างโดยใช้ gRPC หรือ REST
ฟิลด์การเดินทาง
ใช้ช่องต่อไปนี้เพื่อสร้างการเดินทางใน Fleet Engine คุณใช้ฟิลด์ที่แตกต่างกันสำหรับทริปประเภทต่างๆ ได้ ไม่ว่าจะเป็นทริปที่มีจุดหมายเดียวหรือหลายจุดหมาย ทริปที่ต่อเนื่องกัน หรือทริปที่แชร์กัน คุณระบุฟิลด์ที่ไม่บังคับได้เมื่อสร้างการเดินทาง หรือจะตั้งค่าในภายหลังเมื่ออัปเดตการเดินทางก็ได้
ชื่อ | จำเป็นหรือไม่ | คำอธิบาย |
---|---|---|
parent | ใช่ | สตริงที่มีรหัสโปรเจ็กต์ รหัสนี้ต้องเป็นรหัสเดียวกันกับที่ใช้ ในการผสานรวม Fleet Engine ทั้งหมด โดยมีบทบาทบัญชีบริการเดียวกัน |
trip_id | ใช่ | สตริงที่คุณสร้างขึ้นซึ่งระบุการเดินทางนี้โดยเฉพาะ รหัสการเดินทางมี ข้อจำกัดบางอย่างตามที่ระบุไว้ในการอ้างอิง |
trip_type | ใช่ | ตั้งค่า TripType เป็นค่าต่อไปนี้สำหรับประเภทการเดินทางที่คุณสร้าง
|
pickup_point | ใช่ | จุดเริ่มต้นของการเดินทาง |
ปลายทางระดับกลาง | ใช่ | การเดินทางแบบหลายจุดหมายเท่านั้น: รายชื่อจุดหมายกลางที่คนขับแวะระหว่าง
จุดรับและจุดส่ง เช่นเดียวกับ |
vehicle_waypoints | ใช่ | การเดินทางแบบรวมรถเท่านั้น: ฟิลด์นี้รองรับการสลับจุดแวะพักจากการเดินทางหลายครั้ง
ซึ่งจะมีจุดแวะพักที่เหลือทั้งหมดของยานพาหนะที่กำหนด รวมถึงจุดแวะพักรับและส่งสำหรับการเดินทางนี้ คุณตั้งค่าช่องนี้ได้
โดยโทรหา |
number_of_passengers | ไม่ | จำนวนผู้โดยสารในการเดินทาง |
dropoff_point | ไม่ | จุดหมายปลายทางของการเดินทาง |
vehicle_id | ไม่ | รหัสของยานพาหนะที่กำหนดให้กับการเดินทาง |
ตัวอย่าง: สร้างการเดินทางแบบรวมรถที่แชร์
ตัวอย่างการผสานรวมแบ็กเอนด์ต่อไปนี้แสดงวิธีสร้างการเดินทางและ กำหนดให้เป็นการเดินทางแบบแชร์รถ
// Vehicle with VEHICLE_ID ID is already created and it is assigned Trip A.
static final String PROJECT_ID = "my-rideshare-co-gcp-project";
static final String TRIP_ID = "shared-trip-A";
static final String VEHICLE_ID = "your-vehicle-id";
static final String TRIP_A_ID = "trip-a-id";
static final String TRIP_B_ID = "trip-b-id";
TripServiceBlockingStub tripService = TripService.newBlockingStub(channel);
String parent = "providers/" + PROJECT_ID;
LatLng tripBPickup =
LatLng.newBuilder().setLatitude(-12.12314).setLongitude(88.142123).build();
LatLng tripBDropoff =
LatLng.newBuilder().setLatitude(-14.12314).setLongitude(90.142123).build();
TerminalLocation tripBPickupTerminalLocation =
TerminalLocation.newBuilder().setPoint(tripBPickup).build();
TerminalLocation tripBDropoffTerminalLocation =
TerminalLocation.newBuilder().setPoint(tripBDropoff).build();
// TripA already exists and it's assigned to a vehicle with VEHICLE_ID ID.
Trip tripB = Trip.newBuilder()
.setTripType(TripType.SHARED)
.setVehicleId(VEHICLE_ID)
.setPickupPoint(tripBPickupTerminalLocation)
.setDropoffPoint(tripBDropoffTerminalLocation)
.addAllVehicleWaypoints(
// This is where you define the arrival order for unvisited waypoints.
// If you don't specify an order, then the Fleet Engine adds Trip B's
// waypoints to the end of Trip A's.
ImmutableList.of(
// Trip B's pickup point.
TripWaypoint.newBuilder()
.setLocation(tripBPickupTerminalLocation)
.setTripId(TRIP_B_ID)
.setWaypointType(WaypointType.PICKUP_WAYPOINT_TYPE)
.build(),
// Trip A's drop-off point.
TripWaypoint.newBuilder()
.setLocation(tripA.getDropoffPoint())
.setTripId(TRIP_A_ID)
.setWaypointType(WaypointType.DROP_OFF_WAYPOINT_TYPE)
.build(),
// Trip B's drop-off point.
TripWaypoint.newBuilder()
.setLocation(tripBDropoffTerminalLocation)
.setTripId(TRIP_B_ID)
.setWaypointType(WaypointType.DROP_OFF_WAYPOINT_TYPE)
.build()))
.build();
// Create Trip request
CreateTripRequest createTripRequest = CreateTripRequest.newBuilder()
.setParent(parent)
.setTripId(TRIP_B_ID)
.setTrip(tripB)
.build();
try {
// createdTrip.remainingWaypoints will contain shared-pool waypoints.
// [tripB.pickup, tripA.dropoff, tripB.dropoff]
Trip createdTrip = tripService.createTrip(createTripRequest);
} catch (StatusRuntimeException e) {
Status s = e.getStatus();
switch (s.getCode()) {
case ALREADY_EXISTS:
break;
case PERMISSION_DENIED:
break;
}
return;
}
อัปเดตการเดินทางแบบรวมรถที่แชร์
การเดินทางที่สร้างใน Fleet Engine ต้องกำหนดให้กับยานพาหนะเพื่อให้ Fleet Engine คำนวณเวลาถึงโดยประมาณของการเดินทางและติดตามการเดินทางได้ โดยคุณจะทำในระหว่างการสร้างทริปหรือในภายหลังเมื่ออัปเดตทริปก็ได้
สำหรับการเดินทางแบบรวมรถ คุณต้องระบุลำดับของจุดแวะพักที่ยังไม่ได้เข้าชม
ในคอลเล็กชันจุดแวะพักของยานพาหนะในการเดินทาง (Trip.vehicle_waypoints
) Fleet
Engine ใช้รายการนี้เพื่ออัปเดตจุดแวะพักของการเดินทางโดยอัตโนมัติสำหรับการเดินทางทั้งหมด
ในการรวมรถ
ตัวอย่างเช่น พิจารณาการเดินทางแบบแชร์พูล 2 รายการ ได้แก่ การเดินทาง ก และ การเดินทาง ข
- การเดินทาง A กำลังมุ่งหน้าไปยังจุดส่ง
- จากนั้นระบบจะเพิ่มการเดินทาง B ลงในยานพาหนะคันเดียวกัน
ในUpdateTripRequest
สำหรับการเดินทาง B
คุณตั้งค่าvehicleId
และตั้งค่าTrip.vehicle_waypoints
เป็นลำดับจุดอ้างอิงที่เหมาะสม
B รับ
→ A ส่ง →
B ส่ง
- การเรียก
getVehicle()
จะแสดงremainingWaypoints
ที่มีข้อมูลต่อไปนี้
B Pickup → A Drop-off → B Drop-off getTrip()
หรือonTripRemainingWaypointsUpdated
การเรียกกลับสำหรับ การเดินทาง A จะแสดงผลremainingWaypoints
ที่มีข้อมูลต่อไปนี้
จุดรับ → จุดส่งgetTrip()
หรือonTripRemainingWaypointsUpdated
การเรียกกลับสำหรับ การเดินทาง B จะแสดงผลremainingWaypoints
ซึ่งมีข้อมูลต่อไปนี้
จุดรับ B → จุดส่ง A → จุดส่ง B
ตัวอย่าง
ตัวอย่างการผสานรวมแบ็กเอนด์ต่อไปนี้แสดงวิธีอัปเดตการเดินทางด้วย รหัสยานพาหนะและจุดอ้างอิงสำหรับการเดินทางแบบแชร์พูล 2 รายการ
static final String PROJECT_ID = "my-rideshare-co-gcp-project";
static final String TRIP_A_ID = "share-trip-A";
static final String TRIP_B_ID = "share-trip-B";
static final String VEHICLE_ID = "Vehicle";
String tripName = "providers/" + PROJECT_ID + "/trips/" + TRIP_B_ID;
// Get Trip A and Trip B objects from either the Fleet Engine or storage.
Trip tripA = …;
Trip tripB = …;
TripServiceBlockingStub tripService = TripService.newBlockingStub(channel);
// The trip settings to update.
Trip trip = Trip.newBuilder()
.setVehicleId(VEHICLE_ID)
.addAllVehicleWaypoints(
// This is where you define the arrival order for unvisited waypoints.
// If you don't specify an order, then the Fleet Engine adds Trip B's
// waypoints to the end of Trip A's.
ImmutableList.of(
// Trip B's pickup point.
TripWaypoint.newBuilder()
.setLocation(tripB.getPickupPoint())
.setTripId(TRIP_B_ID)
.setWaypointType(WaypointType.PICKUP_WAYPOINT_TYPE)
.build(),
// Trip A's drop-off point.
TripWaypoint.newBuilder()
.setLocation(tripA.getDropoffPoint())
.setTripId(TRIP_A_ID)
.setWaypointType(WaypointType.DROP_OFF_WAYPOINT_TYPE)
.build(),
// Trip B's drop-off point.
TripWaypoint.newBuilder()
.setLocation(tripB.getDropoffPoint())
.setTripId(TRIP_B_ID)
.setWaypointType(WaypointType.DROP_OFF_WAYPOINT_TYPE)
.build()))
.build();
// The trip update request.
UpdateTripRequest updateTripRequest = UpdateTripRequest.newBuilder()
.setName(tripName)
.setTrip(trip)
.setUpdateMask(FieldMask.newBuilder()
.addPaths("vehicle_id")
.addPaths("vehicle_waypoints"))
.build();
// Error handling. If Fleet Engine has both a trip and vehicle with the IDs,
// and if the credentials validate, and if the given vehicle_waypoints list
// is valid, then the service updates the trip.
try {
Trip updatedTrip = tripService.updateTrip(updateTripRequest);
} catch (StatusRuntimeException e) {
Status s = e.getStatus();
switch (s.getCode()) {
case NOT_FOUND: // Either the trip or vehicle does not exist.
break;
case PERMISSION_DENIED:
break;
case INVALID_REQUEST: // vehicle_waypoints is invalid.
break;
}
return;
}