LANDFIRE (LF), Landscape Fire and Resource Management Planning Tools는 미국 농무부 산림청, 미국 내무부 지질조사국, The Nature Conservancy의 야생지 화재 관리 프로그램 간에 공유되는 프로그램입니다.
Landfire (LF) 과거 화재 체제, 간격, 식생 조건은 식생 역학 개발 도구 (VDDT)를 사용하여 매핑됩니다.
이러한 데이터는 National Cohesive Wildland Fire Management Strategy, Federal Wildland Fire Management Policy, Healthy Forests Restoration Act의 화재 및 조경 관리 계획 목표를 지원합니다.
천이 클래스 (SClass) 레이어는 각 생물리학적 환경 내에서 발생하는 천이 상태의 식물 종 구성, 피복, 높이 범위와 관련하여 현재 식물 상태를 특징짓습니다.
SClass는 생물리학적 설정에 정의된 천이 상태의 구성 또는 구조적 변동 내에서 발견되지 않는 외래종과 같은 비특징적인 식물 구성요소를 나타낼 수도 있습니다.
계승 클래스는 현재 식생의 연료 특성을 직접 정량화하지 않고 구조적 발달이나 화재 빈도와 같은 고유한 계승 또는 교란 관련 역학을 갖는 식생 상태를 나타냅니다.
SClass를 생성하기 위해 이러한 연속 상태의 과거 참조 조건은 식생 및 교란 역학 모델 VDDT (Vegetation Dynamics Development Tool)에서 파생되었습니다(LF_1.0.0 CONUS는 식생 및 교란 역학 모델 LANDSUM만 사용함).
연속 클래스에 포함된 영역은 시뮬레이션된 과거 참조 조건과 비교하여 화재 체제 조건 클래스와 같은 식생 이탈 측정값을 계산합니다.
SClass는 지형 평가에 사용됩니다.
LANDIFRE 화재 데이터 세트에는 다음이 포함됩니다.
화재 체제 그룹 (FRG)은 식물 역학, 화재 확산, 화재 효과, 공간적 맥락 간의 상호작용을 기반으로 한 지형 내의 추정되는 역사적 화재 체제를 특징짓기 위한 것입니다.
평균 화재 복귀 간격 (MFRI)은 추정되는 과거 화재 체제에서 화재 간 평균 기간을 정량화합니다.
낮은 심각도 화재 비율 (PLS) 이미지는 추정되는 역사적 화재 체제에서 혼합 및 대체 심각도 화재에 대한 낮은 심각도 화재의 양을 정량화하며, 특정 식생 유형의 일반적인 화재 경계 내에서 평균 상단 고사가 25% 미만으로 정의됩니다.
혼합 심각도 화재 비율 (PMS)은 추정된 과거 화재 체제에서 심각도가 낮은 화재 및 대체 심각도 화재와 관련된 혼합 심각도 화재의 양을 정량화하며, 지정된 식물 유형의 일반적인 화재 경계 내에서 평균 상단 고사가 25~75%인 것으로 정의됩니다.
교체 심각도 화재 비율 (PRS)은 추정되는 과거 화재 체제에서 교체 심각도 화재의 양을 낮은 심각도 및 혼합 심각도 화재와 관련하여 정량화하며, 주어진 식물 유형의 일반적인 화재 경계 내에서 평균 상단 고사가 75% 이상으로 정의됩니다.
계승 클래스 (SClass) 레이어는 각 생물리학적 환경 내에서 발생하는 계승 상태의 식물 종 구성, 피복, 높이 범위와 관련하여 현재 식물 상태를 특징짓습니다.
식생 조건 클래스 (VCC)는 연결된 식생 이탈 (VDEP) 레이어의 간단한 분류를 나타내며, 현재 식생이 시뮬레이션된 과거 식생 참조 조건과 얼마나 다른지 일반적인 수준을 나타냅니다.
식생 이탈 (VDep)은 현재 경관의 식생이 추정된 과거 조건과 얼마나 다른지 나타냅니다. VDep은 종 구성, 구조적 단계, 수관 폐쇄의 변화를 기반으로 합니다.
대역
픽셀 크기 30미터
대역
이름
픽셀 크기
설명
SClass
미터
승계 클래스
SClass 클래스 표
값
색상
설명
1
#a16333
승계 클래스 A
2
#38a800
Succession Class B
3
#c9deab
Succession Class C
4
#fff8a6
승계 클래스 D
5
#004a4d
승계 클래스 E
6
#a00000
특성이 없는 기본 식물 덮개 / 구조 / 구성
7
#ff0000
특이한 외래 식물
111
#0000ff
물
112
#c8ffff
눈 / 얼음
120
#8400a8
불연성 도시
121
#e8beff
Burnable Urban
131
#4e4e4e
불모지
132
#b2b2b2
식물이 적은 지역
180
#ffff00
불연성 농업
181
#ffaa00
연소 가능한 농업
이미지 속성
이미지 속성
이름
유형
설명
SClass_classes
DOUBLE
계승 클래스의 클래스 값입니다.
SClass_names
문자열
후계 클래스의 설명 이름입니다.
이용약관
이용약관
LANDFIRE 데이터는 사용 제한이 없는 퍼블릭 도메인 데이터입니다. 하지만 제품의 수정사항이나 파생 상품을 만든 경우 혼동을 방지하기 위해 데이터 세트에 설명이 포함된 수정자를 추가하세요.
인용
인용:
LANDFIRE 제품을 인용하는 방법은 제품마다 다르므로 인용 모델이 특정 제품의 예와 함께 제공됩니다.
제작자로서 출시 연도입니다. 제품 xxxxx:
개별 모델 이름입니다.
BpS 모델 및 설명, 온라인. LANDFIRE. 워싱턴 DC 미국 농무부 산림청
U.S. Department of the Interior; U.S. Geological Survey; Arlington, VA
The Nature Conservancy (제작자) 사용 가능한 URL입니다. 액세스 날짜입니다.
인용 예: LANDFIRE Biophysical Settings. 2018년. 생물리학적 설정 14420:
사우스 텍사스 모래 시트 초원 In: LANDFIRE Biophysical Setting Model: Map zone 36,
[Online]. In: BpS Models and Descriptions. In: LANDFIRE. 워싱턴 D.C.:
미국 농무부, 산림청; 미국 내무부;
미국 지질조사국; 알링턴, 버지니아: The Nature Conservancy (제작자).
출처: https://www.landfire.gov/bps-models.php [2018년 6월 27일].
LANDFIRE 제품 인용에 관한 추가 안내는 여기에서 확인할 수 있습니다.
LANDFIRE (LF), Landscape Fire and Resource Management Planning Tools는 미국 농무부 산림청, 미국 내무부 지질조사국, The Nature Conservancy의 야생 화재 관리 프로그램 간에 공유되는 프로그램입니다. Landfire (LF)의 과거 화재 발생 빈도, 간격, 식생 조건은 다음을 사용하여 매핑됩니다.
[null,null,[],[[["\u003cp\u003eLANDFIRE (LF) is a shared program between the USDA Forest Service, USGS, and The Nature Conservancy providing data for landscape fire and resource management planning.\u003c/p\u003e\n"],["\u003cp\u003eThe Succession Classes (SClass) layer characterizes current vegetation conditions such as species composition, cover, and height, with respect to successional states.\u003c/p\u003e\n"],["\u003cp\u003eThis dataset includes a single band, \u003ccode\u003eSClass\u003c/code\u003e, representing vegetation conditions, and has a 30-meter resolution.\u003c/p\u003e\n"],["\u003cp\u003eLANDFIRE data are public domain and can be used without restrictions, although modifications should be clearly indicated.\u003c/p\u003e\n"],["\u003cp\u003eThe dataset covers the continental United States and is based on historical fire regimes and vegetation dynamics.\u003c/p\u003e\n"]]],[],null,["# LANDFIRE SClass (Succession Classes) v1.4.0\n\nDataset Availability\n: 2014-09-01T00:00:00Z--2014-09-01T00:00:00Z\n\nDataset Provider\n:\n\n\n [U.S. Department of Agriculture's (USDA), U.S. Forest Service (USFS), U.S. Department of the Interior's Geological Survey (USGS), and The Nature Conservancy.](https://landfire.gov/)\n\nTags\n:\n[doi](/earth-engine/datasets/tags/doi) [fire](/earth-engine/datasets/tags/fire) [landfire](/earth-engine/datasets/tags/landfire) [nature-conservancy](/earth-engine/datasets/tags/nature-conservancy) [usda](/earth-engine/datasets/tags/usda) [usgs](/earth-engine/datasets/tags/usgs) [vegetation](/earth-engine/datasets/tags/vegetation) [wildfire](/earth-engine/datasets/tags/wildfire) \n\n#### Description\n\nLANDFIRE (LF), Landscape Fire and Resource Management Planning Tools, is a\nshared program between the wildland fire management programs of the U.S.\nDepartment of Agriculture's Forest Service, U.S. Department of the Interior's\nGeological Survey, and The Nature Conservancy.\n\nLandfire (LF) Historical fire regimes, intervals, and vegetation conditions\nare mapped using the Vegetation Dynamics Development Tool (VDDT).\nThese data support fire and landscape management planning goals in\nthe National Cohesive Wildland Fire Management Strategy, the Federal Wildland\nFire Management Policy, and the Healthy Forests Restoration Act.\n\nThe Succession Classes (SClass) layer characterizes current vegetation conditions with respect to the vegetation species composition, cover, and height ranges of successional states that occur within each biophysical setting.\nSClass can also represent uncharacteristic vegetation components, such as exotic species, that are not found within the compositional or structural variability of successional states defined for a biophysical setting.\nSuccession classes do not directly quantify fuel characteristics of the current vegetation, but rather represent vegetative states with unique succession or disturbance-related dynamics, such as structural development or fire frequency.\nTo produce SClass, the historical reference conditions of these successional states were derived from the vegetation and disturbance dynamics model VDDT (Vegetation Dynamics Development Tool) (LF_1.0.0 CONUS only used the vegetation and disturbance dynamics model LANDSUM).\nThe area contained in succession classes is compared to the simulated historical reference conditions to calculate measurements of vegetation departure, such as fire regime condition class.\nSClass is used in landscape assessments.\n\nThe LANDIFRE Fire datasets include:\n\n- Fire Regime Groups (FRG) is intended to characterize presumed historical fire regimes within landscapes based on interactions between vegetation dynamics, fire spread, fire effects, and spatial context\n- Mean Fire Return Interval (MFRI) quantifies the average period between fires under the presumed historical fire regime\n- Percent of Low-severity Fire (PLS) image quantifies the amount of low-severity fires relative to mixed- and replacement-severity fires under the presumed historical fire regime and is defined as less than 25 percent average top-kill within a typical fire perimeter for a given vegetation type\n- Percent of Mixed-severity Fire (PMS) layer quantifies the amount of mixed-severity fires relative to low- and replacement-severity fires under the presumed historical fire regime, and is defined as between 25 and 75 percent average top-kill within a typical fire perimeter for a given vegetation type\n- Percent of Replacement-severity Fire (PRS) layer quantifies the amount of replacement-severity fires relative to low- and mixed-severity fires under the presumed historical fire regime, and is defined as greater than 75 percent average top-kill within a typical fire perimeter for a given vegetation type\n- Succession Classes (SClass) layer characterizes current vegetation conditions with respect to the vegetation species composition, cover, and height ranges of successional states that occur within each biophysical setting\n- Vegetation Condition Class (VCC) represents a simple categorization of the associated Vegetation Departure (VDEP) layer and indicates the general level to which current vegetation is different from the simulated historical vegetation reference conditions\n- Vegetation Departure (VDep) indicates how different current vegetation on a landscape is from estimated historical conditions. VDep is based on changes to species composition, structural stage, and canopy closure.\n\n### Bands\n\n\n**Pixel Size**\n\n30 meters\n\n**Bands**\n\n| Name | Pixel Size | Description |\n|----------|------------|--------------------|\n| `SClass` | meters | Succession Classes |\n\n**SClass Class Table**\n\n| Value | Color | Description |\n|-------|---------|--------------------------------------------------------------------|\n| 1 | #a16333 | Succession Class A |\n| 2 | #38a800 | Succession Class B |\n| 3 | #c9deab | Succession Class C |\n| 4 | #fff8a6 | Succession Class D |\n| 5 | #004a4d | Succession Class E |\n| 6 | #a00000 | Uncharacteristic Native Vegetation Cover / Structure / Composition |\n| 7 | #ff0000 | Uncharacteristic Exotic Vegetation |\n| 111 | #0000ff | Water |\n| 112 | #c8ffff | Snow / Ice |\n| 120 | #8400a8 | Non-burnable Urban |\n| 121 | #e8beff | Burnable Urban |\n| 131 | #4e4e4e | Barren |\n| 132 | #b2b2b2 | Sparsely Vegetated |\n| 180 | #ffff00 | Non-burnable Agriculture |\n| 181 | #ffaa00 | Burnable Agriculture |\n\n### Image Properties\n\n**Image Properties**\n\n| Name | Type | Description |\n|----------------|--------|------------------------------------------|\n| SClass_classes | DOUBLE | Class values of the Succession Classes. |\n| SClass_names | STRING | Descriptive names of Succession Classes. |\n\n### Terms of Use\n\n**Terms of Use**\n\nLANDFIRE data are public domain data with no use restrictions, though if modifications\nor derivatives of the product(s) are created, then please add some descriptive modifier\nto the data set to avoid confusion.\n\n### Citations\n\nCitations:\n\n- The suggested way to cite LANDFIRE products is specific to each product,\n so the model for citation is provided, with an example for a particular product.\n Producer. Year released. Product xxxxx:\n - Individual model name.\n - BpS Models and Descriptions, Online. LANDFIRE. Washington, DC. U.S. Department of Agriculture, Forest Service\n - U.S. Department of the Interior; U.S. Geological Survey; Arlington, VA\n - The Nature Conservancy (Producers). Available- URL. Access date.\n\n Example Citation: LANDFIRE Biophysical Settings. 2018. Biophysical setting 14420:\n South Texas sand sheet grassland. In: LANDFIRE Biophysical Setting Model: Map zone 36,\n \\[Online\\]. In: BpS Models and Descriptions. In: LANDFIRE. Washington, DC:\n U.S. Department of Agriculture, Forest Service; U.S. Department of the Interior;\n U.S. Geological Survey; Arlington, VA: The Nature Conservancy (Producers).\n Available: \u003chttps://www.landfire.gov/bps-models.php\u003e \\[2018, June 27\\].\n Additional guidance on citation of LANDFIRE products can be found\n [here](https://landfire.gov/data/citation)\n\n### Explore with Earth Engine\n\n| **Important:** Earth Engine is a platform for petabyte-scale scientific analysis and visualization of geospatial datasets, both for public benefit and for business and government users. Earth Engine is free to use for research, education, and nonprofit use. To get started, please [register for Earth Engine access.](https://console.cloud.google.com/earth-engine)\n\n### Code Editor (JavaScript)\n\n```javascript\nvar dataset = ee.ImageCollection('LANDFIRE/Fire/SClass/v1_4_0');\n\nvar visualization = {\n bands: ['SClass'],\n};\n\nMap.setCenter(-121.671, 40.699, 5);\n\nMap.addLayer(dataset, visualization, 'SClass');\n```\n[Open in Code Editor](https://code.earthengine.google.com/?scriptPath=Examples:Datasets/LANDFIRE/LANDFIRE_Fire_SClass_v1_4_0) \n[LANDFIRE SClass (Succession Classes) v1.4.0](/earth-engine/datasets/catalog/LANDFIRE_Fire_SClass_v1_4_0) \nLANDFIRE (LF), Landscape Fire and Resource Management Planning Tools, is a shared program between the wildland fire management programs of the U.S. Department of Agriculture's Forest Service, U.S. Department of the Interior's Geological Survey, and The Nature Conservancy. Landfire (LF) Historical fire regimes, intervals, and vegetation conditions are mapped using ... \nLANDFIRE/Fire/SClass/v1_4_0, doi,fire,landfire,nature-conservancy,usda,usgs,vegetation,wildfire \n2014-09-01T00:00:00Z/2014-09-01T00:00:00Z \n17.52 -175.1 71.48 -63.66 \nGoogle Earth Engine \nhttps://developers.google.com/earth-engine/datasets\n\n- [](https://doi.org/https://landfire.gov/)\n- [](https://doi.org/https://developers.google.com/earth-engine/datasets/catalog/LANDFIRE_Fire_SClass_v1_4_0)"]]