Hearables

This section specifies the minimum GFPS features required to certify FastPair on Hearable devices.

Self Test Report

Hearables should use either the BT Classic or BlueTooth LE Audio Self-Test Report forms, depending on implementation.

TWS (True Wireless Headphones)

This section specifies the TWS behavior for the FastPair functionality and includes the mandatory and optional features of GFPS required to certify FastPair on TWS.

Dependency

To be certified, the device shall support at minimum GFPS v3.1 specification.

Features supported

Requirement	Feature
Mandatory	Device shall follow FastPair Configuration. Device shall support Initial Pairing. Device shall support Subsequent Pairing. Device shall advertise based on FastPair Advertising Signal. Device shall implement GATT Characteristics. Device shall follow FastPair Procedure. Device shall support Message Stream: Device Information. Device Action (Ring Device). Device shall support Battery Notification extension and shall support levels for three components (left & right earbud and charging case) along with charging status. For charging case if battery level is not supported send an invalid value of 0xFF. Device shall support Personalized Name. Device shall support Retroactive Pairing extension.
Optional	GATT Characteristics: Firmware Revision. Audio Switch: Minimum GFPS version supported by device shall be v3.2. Device shall support MAC. Device shall support Acknowledgement. Hearable Controls. Find My Device Network.

Device Console Configuration - TWS

Some features must also be configured in the Device Console to work. This table describes the options a partner must select to enable those features.

Feature Type	Feature Name	Device Console Option Name	Example
Mandatory	Device Action (Ring Device)	Support Ringing Device
Mandatory	Personalized Name	No Personalized Name
Optional	Firmware Revision	Firmware Version Firmware Type Firmware Changelog
Optional	Audio Switch	Smart Audio Source Switching
Optional	Hearable Controls	Support ANC Slice on Fast Pair
Optional	Find My Device Network	Find My Device
Optional	BLE spec support (including LE audio)	LE Audio

Headphone

This section specifies the headphone behavior for the FastPair functionality and includes the mandatory and optional features of GFPS required to certify FastPair on headphone.

Dependency

To be certified, the device shall support at minimum GFPS v3.1 specification.

Features supported

Requirement	Feature
Mandatory	Device shall follow FastPair Configuration. Device shall support Initial Pairing. Device shall support Subsequent Pairing. Device shall advertise based on FastPair Advertising Signal. Device shall implement GATT Characteristics. Device shall follow FastPair Procedure. Device shall support Message Stream: Device Information. Device Action (Ring Device). Device shall support Personalized Name. Device shall support Retroactive Pairing extension.
Optional	GATT Characteristics: Firmware Revision. Audio Switch: Minimum GFPS version supported by device shall be v3.2. Device shall support MAC. Device shall support Acknowledgement Find My Device Network.
Not Supported	Battery Notification.

Device Console Configuration - Headphone

Some features must also be configured in the Device Console to work. This table describes the options a partner must select to enable those features.

Feature Type	Feature Name	Device Console Option Name	Example
Mandatory	Device Action (Ring Device)	Support Ringing Device
Mandatory	Personalized Name	No Personalized Name
Optional	Firmware Revision	Firmware Version Firmware Type Firmware Changelog
Optional	Audio Switch	Smart Audio Source Switching
Optional	Find My Device Network	Find My Device
Optional	BLE spec support (including LE audio)	LE Audio

Speakers

This section specifies the speaker behavior for the FastPair functionality and includes the mandatory and optional features of GFPS required to certify FastPair on speaker.

Dependency

To be certified, the device shall support at minimum GFPS v2.0 specification.

Features supported

Requirement	Feature
Mandatory	Device shall follow the FastPair Configuration. Device shall support Initial Pairing. Device shall support Subsequent Pairing. Device shall advertise based on FastPair Advertising Signal Device shall implement GFPSv2.0 GATT Characteristics Device shall follow FastPair Procedure.
Optional	GATT Characteristics added post GFPSv2.0: Model ID. Firmware Revision. Message Stream Device Information Device Action (Ring Device) All Extensions added post GFPSv2.0: Personalized Name. Retroactive Pairing. Audio Switch: MAC. Acknowledgement.
Not Supported	Battery Notification.

Device Console Configuration - Speakers

Some features must also be configured in the Device Console to work. This table describes the options a partner must select to enable those features.

Feature Type	Feature Name	Device Console Option Name	Example
Optional	Device Action (Ring Device)	Support Ringing Device
Optional	Personalized Name	No Personalized Name
Optional	Firmware Revision	Firmware Version Firmware Type Firmware Changelog
Optional	Audio Switch	Smart Audio Source Switching
Optional	BLE spec support (including LE audio)	LE Audio