Best practice per le modifiche

Nomi delle risorse temporanee

GoogleAdsService.Mutate supporta nomi di risorse temporanei a cui fare riferimento in un secondo momento nella stessa richiesta. Ciò ti consente, ad esempio, di creare una campagna tutti i suoi gruppi di annunci, annunci, parole chiave e così via associati, il tutto in un'unica richiesta.

Puoi farlo specificando il valore resource_name della nuova risorsa per utilizzare un ID negativo. Ad esempio, se crei una campagna e ne specifichi il nome risorsa come customers/<YOUR_CUSTOMER_ID>/campaigns/-1, quando crei gruppo di annunci in un'operazione successiva, potrai farvi riferimento con il nome della risorsa e il valore -1 specificato verrà sostituito dall'ID effettivo della campagna creata automaticamente.

Di seguito sono riportati alcuni aspetti da tenere presente quando utilizzi i nomi temporanei delle risorse:

  • Un nome risorsa temporaneo può essere utilizzato solo dopo essere stato definito in un risorsa. Nell'esempio riportato di seguito, l'operazione relativa al gruppo di annunci dovrebbe essere nell'elenco delle operazioni dopo l'operazione.
  • I nomi delle risorse temporanee non vengono memorizzati nei job né nelle richieste di modifica; per fare riferimento a una risorsa creata in un job precedente o modificare una richiesta, utilizza la sua del nome effettivo della risorsa.
  • Per un singolo job o una richiesta di modifica, ogni nome di risorsa temporanea deve utilizzare un numero negativo univoco, anche se provengono da tipi di risorse diversi. Se un ID temporaneo viene riutilizzato in un singolo job o in una richiesta di modifica, viene generato un errore viene restituito.

Esempio

Per fornire un esempio più concreto alla situazione sopra menzionata, supponi di Vuoi aggiungere una campagna, un gruppo di annunci e un annuncio in una singola richiesta API. Tu creerebbe una struttura per la tua richiesta analoga alla seguente:

mutate_operations: [
  {
    campaign_operation: {
      create: {
        resource_name: "customers/<YOUR_CUSTOMER_ID>/campaigns/-1",
        ...
      }
    }
  },
  {
    ad_group_operation: {
      create: {
        resource_name: "customers/<YOUR_CUSTOMER_ID>/adGroups/-2",
        campaign: "customers/<YOUR_CUSTOMER_ID>/campaigns/-1"
        ...
      }
    }
  },
  {
    ad_group_ad_operation: {
      create: {
        ad_group: "customers/<YOUR_CUSTOMER_ID>/adGroups/-2"
        ...
      }
    }
  },
]

Tieni presente che viene utilizzato un nuovo ID temporaneo per il gruppo di annunci, in quanto non possiamo riutilizzarlo i -1 che abbiamo utilizzato per la campagna; facciamo riferimento anche a questo gruppo di annunci quando creando un annuncio del gruppo di annunci. Lo stesso gruppo di annunci fa riferimento al nome della risorsa per la campagna in un'operazione precedente nella richiesta, mentre resource_name in ad_group_ad_operation non è necessario perché non serve operativa vi fa riferimento.

Operazioni dello stesso tipo di gruppo

Quando utilizzi GoogleAdsService.Mutate, è importante raggruppare le operazioni in base alla rispettiva risorsa nell'array delle operazioni ripetute. Questo il metodo mutate serve essenzialmente da modo per richiamare automaticamente in sequenza il metodo di modifica di ogni singola risorsa. Per farlo, legge le operazioni fino a quando non ne trova una per un altro tipo di risorse, quindi raggruppa tutti i operazioni uguali nello stesso tipo in un'unica richiesta.

Ad esempio, se hai 5 operazioni sulla campagna, seguite da 10 gruppi di annunci operazioni nel campo operations ripetuto nella chiamata Mutate, quindi di sistema eseguirà in totale due chiamate nel backend, una CampaignService: per 5 operazioni e quella accanto a AdGroupService per 10 operazioni. Tuttavia, se li raggruppassi in modo diverso, il rendimento potrebbe essere molto peggio. Se crei solo due campagne e due gruppi di annunci, ma li intrecci in modo che operazioni sono in ordine [campagna, gruppo di annunci, campagna, gruppo di annunci], genererà quattro chiamate totali nel backend. L'API sarà più lenta e, in casi estremi, possono persino portare a timeout.

Recupera gli attributi mutabili dalla risposta

Se imposti response_content_type della richiesta di modifica su MUTABLE_RESOURCE, la risposta conterrà i valori di tutti i campi modificabili per ogni oggetto creato o aggiornato dalla richiesta. Usa questa funzione per evitare di Richiesta search o searchStream dopo ogni richiesta di modifica.

Se non imposti response_content_type, l'API Google Ads utilizzerà per impostazione predefinita RESOURCE_NAME_ONLY e la risposta conterrà solo il nome risorsa di ogni risorsa creata o aggiornata.

Ecco un esempio di recupero di una risorsa modificabile da una chiamata API:

Java

private String createExperimentArms(
    GoogleAdsClient googleAdsClient, long customerId, long campaignId, String experiment) {
  List<ExperimentArmOperation> operations = new ArrayList<>();
  operations.add(
      ExperimentArmOperation.newBuilder()
          .setCreate(
              // The "control" arm references an already-existing campaign.
              ExperimentArm.newBuilder()
                  .setControl(true)
                  .addCampaigns(ResourceNames.campaign(customerId, campaignId))
                  .setExperiment(experiment)
                  .setName("control arm")
                  .setTrafficSplit(40)
                  .build())
          .build());
  operations.add(
      ExperimentArmOperation.newBuilder()
          .setCreate(
              // The non-"control" arm, also called a "treatment" arm, will automatically
              // generate draft campaigns that you can modify before starting the experiment.
              ExperimentArm.newBuilder()
                  .setControl(false)
                  .setExperiment(experiment)
                  .setName("experiment arm")
                  .setTrafficSplit(60)
                  .build())
          .build());

  try (ExperimentArmServiceClient experimentArmServiceClient =
      googleAdsClient.getLatestVersion().createExperimentArmServiceClient()) {
    // Constructs the mutate request.
    MutateExperimentArmsRequest mutateRequest = MutateExperimentArmsRequest.newBuilder()
        .setCustomerId(Long.toString(customerId))
        .addAllOperations(operations)
        // We want to fetch the draft campaign IDs from the treatment arm, so the easiest way to do
        // that is to have the response return the newly created entities.
        .setResponseContentType(ResponseContentType.MUTABLE_RESOURCE)
        .build();

    // Sends the mutate request.
    MutateExperimentArmsResponse response =
        experimentArmServiceClient.mutateExperimentArms(mutateRequest);

    // Results always return in the order that you specify them in the request. Since we created
    // the treatment arm last, it will be the last result.  If you don't remember which arm is the
    // treatment arm, you can always filter the query in the next section with
    // `experiment_arm.control = false`.
    MutateExperimentArmResult controlArmResult = response.getResults(0);
    MutateExperimentArmResult treatmentArmResult = response.getResults(
        response.getResultsCount() - 1);

    System.out.printf("Created control arm with resource name '%s'%n",
        controlArmResult.getResourceName());
    System.out.printf("Created treatment arm with resource name '%s'%n",
        treatmentArmResult.getResourceName());

    return treatmentArmResult.getExperimentArm().getInDesignCampaigns(0);
  }
}
CreateExperiment.java

C#

/// <summary>
/// Creates the experiment arms.
/// </summary>
/// <param name="client">The Google Ads client.</param>
/// <param name="customerId">The customer ID for which the call is made.</param>
/// <param name="baseCampaignId">ID of the campaign for which the control arm is
/// created.</param>
/// <param name="experimentResourceName">Resource name of the experiment.</param>
/// <returns>The control and treatment arms.</returns>
private static (MutateExperimentArmResult, MutateExperimentArmResult)
    CreateExperimentArms(GoogleAdsClient client, long customerId, long baseCampaignId,
        string experimentResourceName)
{
    // Get the ExperimentArmService.
    ExperimentArmServiceClient experimentService = client.GetService(
        Services.V17.ExperimentArmService);

    // Create the control arm. The control arm references an already-existing campaign.
    ExperimentArmOperation controlArmOperation = new ExperimentArmOperation()
    {
        Create = new ExperimentArm()
        {
            Control = true,
            Campaigns = {
                ResourceNames.Campaign(customerId, baseCampaignId)
            },
            Experiment = experimentResourceName,
            Name = "Control Arm",
            TrafficSplit = 40
        }
    };

    // Create the non-control arm. The non-"control" arm, also called a "treatment" arm,
    // will automatically generate draft campaigns that you can modify before starting the
    // experiment.
    ExperimentArmOperation treatmentArmOperation = new ExperimentArmOperation()
    {
        Create = new ExperimentArm()
        {
            Control = false,
            Experiment = experimentResourceName,
            Name = "Experiment Arm",
            TrafficSplit = 60
        }
    };

    // We want to fetch the draft campaign IDs from the treatment arm, so the
    // easiest way to do that is to have the response return the newly created
    // entities.
    MutateExperimentArmsRequest request = new MutateExperimentArmsRequest
    {
        CustomerId = customerId.ToString(),
        Operations = { controlArmOperation, treatmentArmOperation },
        ResponseContentType = ResponseContentType.MutableResource
    };


    MutateExperimentArmsResponse response = experimentService.MutateExperimentArms(
        request
    );

    // Results always return in the order that you specify them in the request.
    // Since we created the treatment arm last, it will be the last result.
    MutateExperimentArmResult controlArm = response.Results.First();
    MutateExperimentArmResult treatmentArm = response.Results.Last();

    Console.WriteLine($"Created control arm with resource name " +
        $"'{controlArm.ResourceName}.");
    Console.WriteLine($"Created treatment arm with resource name" +
      $" '{treatmentArm.ResourceName}'.");
    return (controlArm, treatmentArm);
}

CreateExperiment.cs

PHP

private static function createExperimentArms(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $campaignId,
    string $experimentResourceName
): string {
    $operations = [];
    $experimentArm1 = new ExperimentArm([
        // The "control" arm references an already-existing campaign.
        'control' => true,
        'campaigns' => [ResourceNames::forCampaign($customerId, $campaignId)],
        'experiment' => $experimentResourceName,
        'name' => 'control arm',
        'traffic_split' => 40
    ]);
    $operations[] = new ExperimentArmOperation(['create' => $experimentArm1]);
    $experimentArm2 = new ExperimentArm([
        // The non-"control" arm, also called a "treatment" arm, will automatically
        // generate draft campaigns that you can modify before starting the
        // experiment.
        'control' => false,
        'experiment' => $experimentResourceName,
        'name' => 'experiment arm',
        'traffic_split' => 60
    ]);
    $operations[] = new ExperimentArmOperation(['create' => $experimentArm2]);

    // Issues a request to create the experiment arms.
    $experimentArmServiceClient = $googleAdsClient->getExperimentArmServiceClient();
    $response = $experimentArmServiceClient->mutateExperimentArms(
        MutateExperimentArmsRequest::build($customerId, $operations)
            // We want to fetch the draft campaign IDs from the treatment arm, so the easiest
            // way to do that is to have the response return the newly created entities.
            ->setResponseContentType(ResponseContentType::MUTABLE_RESOURCE)
    );
    // Results always return in the order that you specify them in the request.
    // Since we created the treatment arm last, it will be the last result.
    $controlArmResourceName = $response->getResults()[0]->getResourceName();
    $treatmentArm = $response->getResults()[count($operations) - 1];
    print "Created control arm with resource name '$controlArmResourceName'" . PHP_EOL;
    print "Created treatment arm with resource name '{$treatmentArm->getResourceName()}'"
        . PHP_EOL;

    return $treatmentArm->getExperimentArm()->getInDesignCampaigns()[0];
}
CreateExperiment.php

Python

def create_experiment_arms(client, customer_id, base_campaign_id, experiment):
    """Creates a control and treatment experiment arms.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a client customer ID.
        base_campaign_id: the campaign ID to associate with the control arm of
          the experiment.
        experiment: the resource name for an experiment.

    Returns:
        the resource name for the new treatment experiment arm.
    """
    operations = []

    campaign_service = client.get_service("CampaignService")

    # The "control" arm references an already-existing campaign.
    operation_1 = client.get_type("ExperimentArmOperation")
    exa_1 = operation_1.create
    exa_1.control = True
    exa_1.campaigns.append(
        campaign_service.campaign_path(customer_id, base_campaign_id)
    )
    exa_1.experiment = experiment
    exa_1.name = "control arm"
    exa_1.traffic_split = 40
    operations.append(operation_1)

    # The non-"control" arm, also called a "treatment" arm, will automatically
    # generate draft campaigns that you can modify before starting the
    # experiment.
    operation_2 = client.get_type("ExperimentArmOperation")
    exa_2 = operation_2.create
    exa_2.control = False
    exa_2.experiment = experiment
    exa_2.name = "experiment arm"
    exa_2.traffic_split = 60
    operations.append(operation_2)

    experiment_arm_service = client.get_service("ExperimentArmService")
    request = client.get_type("MutateExperimentArmsRequest")
    request.customer_id = customer_id
    request.operations = operations
    # We want to fetch the draft campaign IDs from the treatment arm, so the
    # easiest way to do that is to have the response return the newly created
    # entities.
    request.response_content_type = (
        client.enums.ResponseContentTypeEnum.MUTABLE_RESOURCE
    )
    response = experiment_arm_service.mutate_experiment_arms(request=request)

    # Results always return in the order that you specify them in the request.
    # Since we created the treatment arm second, it will be the second result.
    control_arm_result = response.results[0]
    treatment_arm_result = response.results[1]

    print(
        f"Created control arm with resource name {control_arm_result.resource_name}"
    )
    print(
        f"Created treatment arm with resource name {treatment_arm_result.resource_name}"
    )

    return treatment_arm_result.experiment_arm.in_design_campaigns[0]
create_experiment.py

Ruby

def create_experiment_arms(client, customer_id, base_campaign_id, experiment)
  operations = []
  operations << client.operation.create_resource.experiment_arm do |ea|
    # The "control" arm references an already-existing campaign.
    ea.control = true
    ea.campaigns << client.path.campaign(customer_id, base_campaign_id)
    ea.experiment = experiment
    ea.name = 'control arm'
    ea.traffic_split = 40
  end
  operations << client.operation.create_resource.experiment_arm do |ea|
    # The non-"control" arm, also called a "treatment" arm, will automatically
    # generate draft campaigns that you can modify before starting the
    # experiment.
    ea.control = false
    ea.experiment = experiment
    ea.name = 'experiment arm'
    ea.traffic_split = 60
  end

  response = client.service.experiment_arm.mutate_experiment_arms(
    customer_id: customer_id,
    operations: operations,
    # We want to fetch the draft campaign IDs from the treatment arm, so the
    # easiest way to do that is to have the response return the newly created
    # entities.
    response_content_type: :MUTABLE_RESOURCE,
  )

  # Results always return in the order that you specify them in the request.
  # Since we created the treatment arm last, it will be the last result.
  control_arm_result = response.results.first
  treatment_arm_result = response.results.last

  puts "Created control arm with resource name #{control_arm_result.resource_name}."
  puts "Created treatment arm with resource name #{treatment_arm_result.resource_name}."

  treatment_arm_result.experiment_arm.in_design_campaigns.first
end
create_experiment.rb

Perl

sub create_experiment_arms {
  my ($api_client, $customer_id, $base_campaign_id, $experiment) = @_;

  my $operations = [];
  push @$operations,
    Google::Ads::GoogleAds::V17::Services::ExperimentArmService::ExperimentArmOperation
    ->new({
      create => Google::Ads::GoogleAds::V17::Resources::ExperimentArm->new({
          # The "control" arm references an already-existing campaign.
          control   => "true",
          campaigns => [
            Google::Ads::GoogleAds::V17::Utils::ResourceNames::campaign(
              $customer_id, $base_campaign_id
            )
          ],
          experiment   => $experiment,
          name         => "control arm",
          trafficSplit => 40
        })});

  push @$operations,
    Google::Ads::GoogleAds::V17::Services::ExperimentArmService::ExperimentArmOperation
    ->new({
      create => Google::Ads::GoogleAds::V17::Resources::ExperimentArm->new({
          # The non-"control" arm, also called a "treatment" arm, will automatically
          # generate draft campaigns that you can modify before starting the
          # experiment.
          control      => "false",
          experiment   => $experiment,
          name         => "experiment arm",
          trafficSplit => 60
        })});

  my $response = $api_client->ExperimentArmService()->mutate({
    customerId => $customer_id,
    operations => $operations,
    # We want to fetch the draft campaign IDs from the treatment arm, so the
    # easiest way to do that is to have the response return the newly created
    # entities.
    responseContentType => MUTABLE_RESOURCE
  });

  # Results always return in the order that you specify them in the request.
  # Since we created the treatment arm last, it will be the last result.
  my $control_arm_result   = $response->{results}[0];
  my $treatment_arm_result = $response->{results}[1];

  printf "Created control arm with resource name '%s'.\n",
    $control_arm_result->{resourceName};
  printf "Created treatment arm with resource name '%s'.\n",
    $treatment_arm_result->{resourceName};
  return $treatment_arm_result->{experimentArm}{inDesignCampaigns}[0];
}
create_experiment.pl

Indietro
Mutazioni collettive