Orçamento da conta

Os orçamentos de conta controlam quanto uma conta pode gastar em um período específico definindo as propriedades do orçamento, como limite de gasto, horário de início e horário de término. Eles precisa apontar para uma das configurações de faturamento da conta para indicar quais as cobranças serão feitas na conta para pagamentos. É possível criar, atualizar e remover AccountBudget enviando Objetos AccountBudgetProposal.

Os objetos AccountBudget representam o resultado final. de aplicação de propostas. Depois que uma proposta é aprovada, suas alterações (sujeitas a qualquer ) resultará na criação de um novo orçamento da conta ou de uma atualizar para um existente. Isso depende da proposal_type especificado na solicitação.

AccountBudgetProposalType Descrição
CREATE Cria um novo orçamento da conta, que precisa ser aprovado antes do uso.
UPDATE Modifica um orçamento de conta existente.
END Define o horário de término do orçamento da conta como o horário atual.
REMOVE Remove um orçamento da conta antes do horário de início.

As seções abaixo descrevem o comportamento de cada tipo de proposta.

Como criar uma proposta de orçamento da conta

A criação de um novo orçamento da conta permite controlar os gastos de um cliente comportamento. Use o AccountBudgetProposalService para criar um novo AccountBudgetProposal Você deve definir proposal_type para CREATE para especificar a criação de um novo orçamento. Consulte a management deste guia para outras operações.

Use uma configuração de faturamento com uma conta para pagamentos em que você tenha acesso. Consulte o guia de configuração de faturamento para detalhes.

O exemplo a seguir demonstra como criar uma nova proposta de orçamento.

Java

private void runExample(GoogleAdsClient googleAdsClient, long customerId, long billingSetupId) {
  // Creates an AccountBudgetProposal. This will be reviewed offline by Google Ads, and if
  // approved will become an AccountBudget.
  AccountBudgetProposal proposal =
      AccountBudgetProposal.newBuilder()
          .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
          .setProposalType(AccountBudgetProposalType.CREATE)
          .setProposedName("Account Budget (example)")

          // Specifies the account budget starts immediately.
          .setProposedStartTimeType(TimeType.NOW)
          // Alternatively you can specify a specific start time. Refer to the
          // AccountBudgetProposal
          // resource documentation for allowed formats.
          //
          // .setProposedStartDateTime("2020-01-02 03:04:05")

          // Specifies that the budget runs forever.
          .setProposedEndTimeType(TimeType.FOREVER)
          // Alternatively you can specify a specific end time. Allowed formats are as above.
          // .setProposedEndDateTime("2021-02-03 04:05:06")

          // Optional: sets notes for the budget. These are free text and do not effect budget
          // delivery.
          // .setProposedNotes("Received prepayment of $0.01")

          // Sets the spending limit to 0.01, measured in the Google Ads account currency.
          .setProposedSpendingLimitMicros(10_000)

          // Optional: sets PO number for record keeping. This value is at the user's
          // discretion, and has no effect on Google Billing & Payments.
          // .setProposedPurchaseOrderNumber("PO number 12345")
          .build();

  // Creates an operation which will add the new AccountBudgetProposal.
  AccountBudgetProposalOperation operation =
      AccountBudgetProposalOperation.newBuilder().setCreate(proposal).build();

  try (AccountBudgetProposalServiceClient accountBudgetProposalServiceClient =
      googleAdsClient.getLatestVersion().createAccountBudgetProposalServiceClient()) {
    // Sends the request to the Account Budget Proposal Service.
    MutateAccountBudgetProposalResponse response =
        accountBudgetProposalServiceClient.mutateAccountBudgetProposal(
            String.valueOf(customerId), operation);

    System.out.printf(
        "Account budget proposal created: %s.%n", response.getResult().getResourceName());
  }
}
      

C#

public void Run(GoogleAdsClient client, long customerId, long billingSetupId)
{
    // Get the AccountBudgetProposalServiceClient.
    AccountBudgetProposalServiceClient proposalService =
        client.GetService(Services.V17.AccountBudgetProposalService);

    // Create an AccountBudgetProposal. The proposal will be reviewed offline by Google Ads,
    // and if approved will become an AccountBudget.
    AccountBudgetProposal proposal = new AccountBudgetProposal()
    {
        BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
        ProposalType = AccountBudgetProposalType.Create,
        ProposedName = "Account Budget (example)",

        // Specify the account budget starts immediately
        ProposedStartTimeType = TimeType.Now,
        // Alternatively, you can specify a specific start time. Refer to the
        // AccountBudgetProposal resource documentation for allowed formats.
        //
        //ProposedStartDateTime = "2020-01-02 03:04:05",

        // Specify that the budget runs forever.
        ProposedEndTimeType = TimeType.Forever,
        // Alternatively you can specify a specific end time. Allowed formats are as above.
        //ProposedEndDateTime = "2021-02-03 04:05:06",

        // Optional: set notes for the budget. These are free text and do not effect budget
        // delivery.
        //ProposedNotes = "Received prepayment of $0.01",

        // Set the spending limit to 0.01, measured in the Google Ads account currency.
        ProposedSpendingLimitMicros = 10_000

        // Optional: set PO number for record keeping. This value is at the user's
        // discretion, and has no effect on Google Billing & Payments.
        //ProposedPurchaseOrderNumber = "PO number 12345"
    };

    // Create an operation which will add the new AccountBudgetProposal
    AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
    {
        Create = proposal
    };

    try
    {
        // Send the request to the Account Budget Proposal Service.
        MutateAccountBudgetProposalResponse response = proposalService.
            MutateAccountBudgetProposal(customerId.ToString(), operation);

        // Display the results.
        Console.WriteLine($"Account budget proposal '{response.Result.ResourceName}' " +
            "was created.");
    }
    catch (GoogleAdsException e)
    {
        Console.WriteLine("Failure:");
        Console.WriteLine($"Message: {e.Message}");
        Console.WriteLine($"Failure: {e.Failure}");
        Console.WriteLine($"Request ID: {e.RequestId}");
        throw;
    }
}
      

PHP

public static function runExample(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $billingSetupId
) {
    // Constructs an account budget proposal.
    $accountBudgetProposal = new AccountBudgetProposal([
        'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
        'proposal_type' => AccountBudgetProposalType::CREATE,
        'proposed_name' => 'Account Budget (example)',
        // Specifies the account budget starts immediately.
        'proposed_start_time_type' => TimeType::NOW,
        // Alternatively you can specify a specific start time. Refer to the
        // AccountBudgetProposal class for allowed formats.
        //
        // 'proposed_start_date_time' => '2020-01-02 03:04:05',

        // Specify that the budget runs forever.
        'proposed_end_time_type' => TimeType::FOREVER,
        // Alternatively you can specify a specific end time. Allowed formats are as above.
        // 'proposed_end_date_time' => '2021-02-03 04:05:06',

        // Optional: set notes for the budget. These are free text and do not effect budget
        // delivery.
        // 'proposed_notes' => 'Received prepayment of $0.01',

        // Optional: set PO number for record keeping. This value is at the user's
        // discretion, and has no effect on Google Billing & Payments.
        // 'proposed_purchase_order_number' => 'PO number 12345',

        // Set the spending limit to 0.01, measured in the Google Ads account currency.
        'proposed_spending_limit_micros' => 10000
    ]);

    $accountBudgetProposalOperation = new AccountBudgetProposalOperation();
    $accountBudgetProposalOperation->setCreate($accountBudgetProposal);

    // Issues a mutate request to add the account budget proposal.
    $accountBudgetProposalServiceClient =
        $googleAdsClient->getAccountBudgetProposalServiceClient();
    $response = $accountBudgetProposalServiceClient->mutateAccountBudgetProposal(
        MutateAccountBudgetProposalRequest::build($customerId, $accountBudgetProposalOperation)
    );

    printf(
        "Added an account budget proposal with resource name '%s'.%s",
        $response->getResult()->getResourceName(),
        PHP_EOL
    );
}
      

Python

def main(client, customer_id, billing_setup_id):
    account_budget_proposal_service = client.get_service(
        "AccountBudgetProposalService"
    )
    billing_setup_service = client.get_service("BillingSetupService")

    account_budget_proposal_operation = client.get_type(
        "AccountBudgetProposalOperation"
    )
    proposal = account_budget_proposal_operation.create

    proposal.proposal_type = client.enums.AccountBudgetProposalTypeEnum.CREATE
    proposal.billing_setup = billing_setup_service.billing_setup_path(
        customer_id, billing_setup_id
    )
    proposal.proposed_name = "Account Budget Proposal (example)"

    # Specify the account budget starts immediately
    proposal.proposed_start_time_type = client.enums.TimeTypeEnum.NOW
    # Alternatively you can specify a specific start time. Refer to the
    # AccountBudgetProposal resource documentation for allowed formats.
    #
    # proposal.proposed_start_date_time = '2020-01-02 03:04:05'

    # Specify that the budget runs forever
    proposal.proposed_end_time_type = client.enums.TimeTypeEnum.FOREVER
    # Alternatively you can specify a specific end time. Allowed formats are as
    # above.
    #
    # proposal.proposed_end_date_time = '2021-01-02 03:04:05'

    # Optional: set notes for the budget. These are free text and do not effect
    # budget delivery.
    #
    # proposal.proposed_notes = 'Received prepayment of $0.01'
    proposal.proposed_spending_limit_micros = 10000

    account_budget_proposal_response = (
        account_budget_proposal_service.mutate_account_budget_proposal(
            customer_id=customer_id,
            operation=account_budget_proposal_operation,
        )
    )
    print(
        "Created account budget proposal "
        f'"{account_budget_proposal_response.result.resource_name}".'
    )
      

Ruby

def add_account_budget_proposal(customer_id, billing_setup_id)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new


  operation = client.operation.create_resource.account_budget_proposal do |proposal|
    proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
    proposal.proposal_type = :CREATE
    proposal.proposed_name = 'Account Budget (example)'

    # Specify the account budget starts immediately
    proposal.proposed_start_time_type = :NOW
    # Alternatively you can specify a specific start time. Refer to the
    # AccountBudgetProposal resource documentation for allowed formats.
    #
    # proposal.proposed_start_date_time = '2020-01-02 03:04:05'

    # Specify that the budget runs forever.
    proposal.proposed_end_time_type = :FOREVER
    # Alternatively you can specify a specific end time. Allowed formats are as
    # above.
    #
    # proposal.proposed_end_date_time = '2021-01-02 03:04:05'

    # Optional: set notes for the budget. These are free text and do not affect
    # budget delivery.
    #
    # proposal.proposed_notes = 'Received prepayment of $0.01'

    # Set the spending limit to 0.01, measured in the Google Ads account currency.
    proposal.proposed_spending_limit_micros = 10_000
  end

  account_budget_proposal_service = client.service.account_budget_proposal
  # Add budget proposal.
  response = account_budget_proposal_service.mutate_account_budget_proposal(
    customer_id: customer_id,
    operation: operation,
  )

  puts sprintf("Created budget proposal %s.",
      response.results.first.resource_name)
end
      

Perl

sub add_account_budget_proposal {
  my ($api_client, $customer_id, $billing_setup_id) = @_;

  # Create an account budget proposal.
  my $account_budget_proposal =
    Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
      billingSetup =>
        Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup(
        $customer_id, $billing_setup_id
        ),
      proposalType => CREATE,
      proposedName => "Account Budget (example)",
      # Specify that the account budget starts immediately.
      proposedStartTimeType => NOW,
      # Alternatively you can specify a specific start time. Refer to the
      # AccountBudgetProposal class for allowed formats.
      #
      # proposedStartDateTime => "2020-01-02 03:04:05",

      # Specify that the account budget runs forever.
      proposedEndDateTime => FOREVER,
      # Alternatively you can specify a specific end time. Allowed formats are as below.
      # proposedEndDateTime => "2021-02-03 04:05:06",

      # Optional: set notes for the budget. These are free text and do not effect budget
      # delivery.
      # proposedNotes => "Received prepayment of $0.01",

      # Optional: set PO number for record keeping. This value is at the user's
      # discretion, and has no effect on Google Billing & Payments.
      # proposedPurchaseOrderNumber => "PO number 12345",

      # Set the spending limit to 0.01, measured in the Google Ads account currency.
      proposedSpendingLimitMicros => 10000
    });

  # Create an account budget proposal operation.
  my $account_budget_proposal_operation =
    Google::Ads::GoogleAds::V17::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      create => $account_budget_proposal
    });

  # Add the account budget proposal.
  my $account_budget_proposal_response =
    $api_client->AccountBudgetProposalService()->mutate({
      customerId => $customer_id,
      operation  => $account_budget_proposal_operation
    });

  printf "Created account budget proposal '%s'.\n",
    $account_budget_proposal_response->{result}{resourceName};

  return 1;
}
      

Nas solicitações de proposta de orçamento da conta, proposed_start_date_time e proposed_end_date_time estejam sempre no fuso horário da conta do cliente; não é possível especificar um fuso horário. A limite proposto de gastos é sempre medido na moeda da conta. especifique-o usando "micro" unidades, então US $1,00 = 1.000.000 micros.

Você também pode incluir um número de ordem de compra, que será exibido ao lado de essas cobranças na fatura. Isso não afeta a exibição do orçamento.

Remover uma proposta de orçamento pendente da conta

Você pode remover uma proposta de orçamento pendente inteira enviando um AccountBudgetProposalOperation Remove com um nome de recurso de proposta de orçamento da conta. No entanto, observe que as propostas de orçamento costumam ser aplicadas em questão de minutos.

Java
.
AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setRemove(StringValue.of(ResourceNames.accountBudgetProposal(customerId, accountBudgetProposalId)))
  .build();

// Send request to Google Ads API (not shown).
C#
.
AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
    Remove = ResourceNames.AccountBudgetProposal(customerId, accountBudgetProposalId)
};

// Send request to Google Ads API (not shown).
PHP
.
$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setRemove(ResourceNames::forAccountBudgetProposal($customerId, $accountBudgetProposalId));

// Send request to Google Ads API (not shown).
Python
.
account_budget_proposal_service = client.get_service('AccountBudgetProposalService')
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.remove
proposal.resource_name = account_budget_proposal_service.account_budget_proposal_path(customer_id, account_budget_proposal_id):

# Send request to Google Ads API (not shown).
Ruby
.
operation = client.operation.remove_resource.account_budget_proposal(client.path.account_budget_proposal(customer_id, account_budget_proposal_id))

# Send request to Google Ads API (not shown).
Perl
my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V17::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      remove => Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup(
          $customer_id, $account_budget_proposal_id
        )
    });

# Send request to Google Ads API (not shown).

Se você tiver cometido um erro com a proposta original, poderá reenviar o proposta como uma operação UPDATE. Consulte a seção Como gerenciar orçamentos de contas existentes abaixo para mais informações.

Recuperação de orçamentos de conta existentes

A seguinte consulta GAQL busca todos os orçamentos existentes em uma conta:

SELECT
  account_budget.status,
  account_budget.billing_setup,
  account_budget.approved_spending_limit_micros,
  account_budget.approved_spending_limit_type,
  account_budget.proposed_spending_limit_micros,
  account_budget.proposed_spending_limit_type,
  account_budget.adjusted_spending_limit_micros,
  account_budget.adjusted_spending_limit_type,
  account_budget.approved_start_date_time,
  account_budget.proposed_start_date_time,
  account_budget.approved_end_date_time,
  account_budget.approved_end_time_type,
  account_budget.proposed_end_date_time,
  account_budget.proposed_end_time_type
FROM
  account_budget

Os campos que englobam o horário de início, o horário de término e o horário de término limite de gastos têm muitas variantes com prefixos como proposed e approved que permitem comparar os valores inicialmente propostos com e aqueles que foram aprovados. O limite de gastos tem campos adicionais com o Prefixo adjusted para indicar o limite de gastos atual em vigor após qualquer ajustes foram aplicados ao valor aprovado.

O limite aprovado de gastos do orçamento de uma conta pode ser ajustado ao longo do tempo para refletir vários créditos, como superfornecimento do orçamento, clique inválido atividade e cupons promocionais. Mais informações sobre orçamentos da conta e créditos e ajustes da conta podem ser encontrados na Central de Ajuda do Google Ads.

Todos os novos orçamentos de contas com aprovação pendente, assim como as contas existentes orçamentos com atualizações pendentes, também terão uma Campo pending_proposal que podem ser selecionadas. Ela vai conter o ID do recurso do(a) AccountBudgetProposal associado objeto.

Exemplos de código

A pasta Billing de cada biblioteca de cliente contém um exemplo de código que mostra uma solicitação completa:

Como gerenciar orçamentos de contas existentes

Depois de criar um orçamento da conta para um cliente, você pode usar AccountBudgetProposalService para gerenciar os parâmetros de orçamento. As operações de gerenciamento mais comuns são atualize os campos spending_limit e end_date_time. Para uma lista completa os campos mutáveis, consulte a AccountBudgetProposal documento.

Você tem a opção de atualizar o orçamento de uma conta existente ou criar uma um orçamento totalmente novo, ambos são mostrados aqui.

Atualizar o orçamento de uma conta existente

Você pode atualizar os campos de orçamento da conta existente enviando Objetos AccountBudgetProposal com AccountBudgetProposalType Defina como UPDATE. Você também precisa indicar os campos que estão sendo atualizados em argumento UpdateMask da operação.

O snippet a seguir demonstra como atualizar o limite de gastos proposto para um orçamento de conta existente.

Java
.
AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.UPDATE)
  .setAccountBudget(accountBudget.getResourceName())
  .setProposedSpendingLimitMicros(
    accountBudget.getProposedSpendingLimitMicros().getValue() + increaseAmount)
  .build();

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposal)
  .setUpdateMask(
      FieldMask.newBuilder().addAllPaths(Arrays.asList("proposed_spending_limit")).build())
  .build();

// Send request to Google Ads API (not shown).
C#
.
AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.Update,
  AccountBudget = accountBudget.ResourceName,
  ProposedSpendingLimitMicros = accountBudget.ProposedSpendingLimitMicros + increaseAmount
};

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
  Create = proposal,
  UpdateMask = new FieldMask()
  {
    Paths = { "proposed_spending_limit" }
  }
};

// Send request to Google Ads API (not shown).
PHP
.
$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::UPDATE,
  'account_budget' => $accountBudget->getResourceName(),
  'proposed_spending_limit_micros' =>
    $accountBudget->getProposedSpendingLimitMicros() + $increaseAmount])

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setCreate($accountBudgetProposal);
$accountBudgetProposalOperation->setUpdateMask(
  FieldMasks::allSetFieldsOf($accountBudgetProposal)
);

// Send request to Google Ads API (not shown).
Python
.
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')

proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').UPDATE
proposal.account_budget = account_budget
proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount

field_mask = protobuf_helpers.field_mask(None, proposal)
account_budget_proposal_operation.update_mask.CopyFrom(field_mask)

# Send request to Google Ads API (not shown).
Ruby
.
proposal = client.resource.account_budget_proposal
proposal.proposal_type = :UPDATE

mask = client.field_mask.with proposal do
  proposal.account_budget = account_budget.resource_name
  proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount
end

operation = client.operation.account_budget_proposal do |op|
  op.create = proposal
  op.update_mask = mask
end

# Send request to Google Ads API (not shown).
Perl
my $account_budget_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    proposalType => UPDATE,
    accountBudget => $account_budget->{resourceName},
    proposedSpendingLimitMicros => $account_budget->{proposedSpendingLimitMicros} + $increaseAmount});

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V17::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      create => $account_budget_proposal,
      updateMask => all_set_fields_of($account_budget_proposal)});

# Send request to Google Ads API (not shown).

Encadeamento de orçamento da conta

Em vez de atualizar o orçamento atual, o Google Ads permite encadear vários orçamentos de conta para serem executados em sucessão. No exemplo a seguir, cliente tem diferentes limites de gastos a cada mês.

Para isso, é preciso criar três Objetos AccountBudgetProposal e enviando para AccountBudgetProposalService

O snippet abaixo demonstra a criação dessa cadeia usando um objeto configuração de faturamento.

Java
.
AccountBudgetProposal proposalMay = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("May budget")
  .setProposedStartDateTime("2018-05-01")
  .setProposedEndDateTime("2018-06-01")
  .setProposedSpendingLimitMicros(1_000_000_000L)
  .build();

AccountBudgetProposal proposalJune = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("June budget")
  .setProposedStartDateTime("2018-06-01")
  .setProposedEndDateTime("2018-07-01")
  .setProposedSpendingLimitMicros(5_000_000_000L)
  .build();

AccountBudgetProposal proposalJuly = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("July budget")
  .setProposedStartDateTime("2018-07-01")
  .setProposedEndDateTime("2018-08-01")
  .setProposedSpendingLimitMicros(1_000_000_000L)
  .build();

// Send request to Google Ads API (not shown).
C#
.
AccountBudgetProposal proposalMay = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "May budget",
  ProposedStartDateTime = "2018-05-01",
  ProposedEndDateTime = "2018-06-01",
  ProposedSpendingLimitMicros = 1_000_000_000
}

AccountBudgetProposal proposalJune = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "June budget",
  ProposedStartDateTime = "2018-06-01",
  ProposedEndDateTime = "2018-07-01",
  ProposedSpendingLimitMicros = 5_000_000_000
}

AccountBudgetProposal proposalJuly = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "July budget",
  ProposedStartDateTime = "2018-07-01",
  ProposedEndDateTime = "2018-08-01",
  ProposedSpendingLimitMicros = 1_000_000_000
}

// Send request to Google Ads API (not shown).
PHP
.
$proposalMay = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'May budget',
  'proposed_start_date_time' => '2018-05-01',
  'proposed_end_date_time' => '2018-06-01',
  'proposed_spending_limit_micros' => 1000000000
]);

$proposalJune = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'June budget',
  'proposed_start_date_time' => '2018-06-01',
  'proposed_end_date_time' => '2018-07-01',
  'proposed_spending_limit_micros' => 5000000000
]);

$proposalJuly = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'July budget',
  'proposed_start_date_time' => '2018-07-01',
  'proposed_end_date_time' => '2018-08-01',
  'proposed_spending_limit_micros' => 1000000000
]);

// Send request to Google Ads API (not shown).
Python
.
may_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposalMay = may_account_budget_proposal_operation.create
proposalMay.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE
proposalMay.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposalMay.proposed_name = 'May budget'
proposalMay.proposed_start_date_time = '2018-05-01'
proposalMay.proposed_end_date_time = '2018-06-01'
proposalMay.proposed_spending_limit_micros = 1000000000

june_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposalJune = may_account_budget_proposal_operation.create
proposalJune.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE
proposalJune.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposalJune.proposed_name = 'June budget'
proposalJune.proposed_start_date_time = '2018-06-01'
proposalJune.proposed_end_date_time = '2018-07-01'
proposalJune.proposed_spending_limit_micros = 5000000000

july_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposalJuly = may_account_budget_proposal_operation.create
proposalJuly.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE
proposalJuly.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposalJuly.proposed_name = 'July budget'
proposalJuly.proposed_start_date_time = '2018-07-01'
proposalJuly.proposed_end_date_time = '2018-08-01'
proposalJuly.proposed_spending_limit_micros = 1000000000

# Send request to Google Ads API (not shown).
Ruby
.
proposal_may = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'May budget'
  proposal.proposed_start_date_time = '2018-05-01'
  proposal.proposed_end_date_time = '2018-06-01'
  proposal.proposed_spending_limit_micros = 1_000_000_000
end

proposal_june = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'June budget'
  proposal.proposed_start_date_time = '2018-06-01'
  proposal.proposed_end_date_time = '2018-07-01'
  proposal.proposed_spending_limit_micros = 5_000_000_000
end

proposal_july = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'July budget'
  proposal.proposed_start_date_time = '2018-07-01'
  proposal.proposed_end_date_time = '2018-08-01'
  proposal.proposed_spending_limit_micros = 1_000_000_000
end

# Send request to Google Ads API (not shown).
Perl
my $may_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "May budget",
    proposedStartDateTime => "2018-05-01",
    proposedEndDateTime => "2018-06-01",
    proposedSpendingLimitMicros => 1000000000
  });

my $june_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "June budget",
    proposedStartDateTime => "2018-06-01",
    proposedEndDateTime => "2018-07-01",
    proposedSpendingLimitMicros => 5000000000
  });

my $july_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "July budget",
    proposedStartDateTime => "2018-07-01",
    proposedEndDateTime => "2018-08-01",
    proposedSpendingLimitMicros => 1000000000
  });

# Send request to Google Ads API (not shown).

Observe o uso de AccountBudgetProposalType.CREATE em cada proposta. Isso vai criar três orçamentos distintos, em vez de atualizar o mesmo orçamento três vezes.

Encerrar orçamentos da conta

Os orçamentos da conta podem ser encerrados enquanto estiverem ativos e removidos por completo antes iniciando ou enquanto a aprovação está pendente.

Encerramento do orçamento da conta ativa

O orçamento da conta ativa não pode ser removido. No entanto, você pode definir o horário de término até o horário atual. A maneira mais simples de fazer isso é enviar uma proposta com AccountBudgetProposalType.END

O snippet a seguir demonstra como encerrar um orçamento de conta existente.

Java
.
AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.END)
  .setAccountBudget(accountBudget.getResourceName())
  .build();

// Send request to Google Ads API (not shown).
C#
.
AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.End,
  AccountBudget = accountBudget.ResourceName
};

// Send request to Google Ads API (not shown).
PHP
.
$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::END,
  'account_budget' => $accountBudget->getResourceName()
])

// Send request to Google Ads API (not shown).
Python
.
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').END
proposal.account_budget = account_budget

# Send request to Google Ads API (not shown).
Ruby
.
proposal = client.resource.account_budget_proposal
proposal.proposal_type = :END
proposal.account_budget = account_budget.resource_name

# Send request to Google Ads API (not shown).
Perl
my $account_budget_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    proposalType => END,
    accountBudget => $account_budget->{resourceName});

# Send request to Google Ads API (not shown).

Isso equivale a atualizar o orçamento de uma conta definindo o fim e data e hora para TimeType.NOW.

Remover um orçamento aprovado da conta antes do horário de início

Se você propôs um orçamento de conta para começar no futuro, remova esse completamente antes do horário de início, enviando uma AccountBudgetProposalType.REMOVE tipo de proposta.

O snippet a seguir demonstra a remoção de uma conta futura existente orçamento.

Java
.
AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.REMOVE)
  .setAccountBudget(accountBudget.getResourceName())
  .build();

// Send request to Google Ads API (not shown).
C#
.
AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.Remove,
  AccountBudget = accountBudget.ResourceName
};

// Send request to Google Ads API (not shown).
PHP
.
$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::REMOVE,
  'account_budget' => $accountBudget->getResourceName()
])

// Send request to Google Ads API (not shown).
Python
.
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').REMOVE
proposal.account_budget = account_budget

# Send request to Google Ads API (not shown).
Ruby
.
proposal = client.resource.account_budget_proposal
proposal.proposal_type = :REMOVE
proposal.account_budget = account_budget.resource_name

# Send request to Google Ads API (not shown).
Perl
my $account_budget_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    proposalType => REMOVE,
    accountBudget => $account_budget->{resourceName});

# Send request to Google Ads API (not shown).