Você pode usar a API Google Ads para fazer o upload de chamadas off-line para o Google Ads a fim de acompanhar quando os anúncios levam a chamadas telefônicas e quando essas chamadas resultam em leads a ações valiosas dos clientes.
Não é possível fazer o upload de um clique para ligar (em smartphones) como conversão se não houver um número de encaminhamento de chamadas do Google relacionado à chamada. Sem um encaminhamento do Google não há como o Google ter certeza de que o clique levou a uma chamada e depois a uma conversão. Se um clique for enviado como este, ele será ignorado pelo de uma ação de conversão.
O mapeamento para a interface do Google Ads é o mesmo que usar a conversão de Uploads. origem e escolha Conversões de chamadas.
Criar uma conversão de chamada
Alguns pontos a serem considerados ao criar um CallConversion:
A partir da versão v15 da API do Google Ads, você deve preencher o
consentdo objetoCallConversion.O atributo
partial_failuredoUploadCallConversionsRequestprecisa ser sempre definido comotrue. Siga as falhas parciais diretrizes ao lidar com tabelas válidas e operações com falha ao mesmo tempo.Se você encontrar um
TOO_RECENT_CONVERSION_ACTIONouTOO_RECENT_CALLresponder a uma solicitação de conversão de upload, aguardar 6 ou 12 horas, respectivamente, antes de tentar novamente as linhas com falha.Pode levar até três horas para que as estatísticas de conversão importadas apareçam na sua conta do Google Ads.
Se você fizer o upload de conversões duplicadas (ou seja, um
CallConversioncom umcaller_id,conversion_date_timeeconversion_actionque foram enviado anteriormente), será retornado um erroCALL_CONVERSION_ALREADY_EXISTS.- Se uma única solicitação tiver várias operações para a mesma conversão,
um erro
DUPLICATE_CALL_CONVERSION_IN_REQUESTserá retornado.
- Se uma única solicitação tiver várias operações para a mesma conversão,
um erro
Fazer o upload de uma conversão de chamada
Para associar suas conversões de chamada off-line a uma ação de conversão que você
precisa das seguintes informações: o identificador de chamadas (número de telefone),
data e hora da conversão, nome do recurso da ação de conversão e, opcionalmente,
o valor de conversão e a moeda ao
ConversionUploadService
Para mais detalhes sobre as diferentes entradas, consulte a Central de
Center. O código
example também descreve os formatos das diferentes entradas.
Requisitos
Há vários requisitos que devem ser cumpridos ao fazer upload de um
CallConversion
Para evitar um erro ConversionUploadError.INVALID_CONVERSION_ACTION, o
Atributo conversion_action
precisa se referir a um ConversionAction em que:
O
ConversionActionTypeéUPLOAD_CALLS.A
statusdeConversionActionéENABLED. Caso contrário, a operação falharáNO_CONVERSION_ACTION_FOUNDerro.O
ConversionActionexiste no cliente de conversão do Google Ads do na conta do Google Ads dele.
Recomendamos também configurar
ConversionAction.category para o
categoria que melhor descreve suas conversões.
Além disso, as condições a seguir precisam ser atendidas:
No momento da chamada, o acompanhamento de conversões estava ativado na Cliente de conversão do Google Ads da conta do Google Ads que fez a chamada.
O
customer_iddoUploadCallConversionsRequestprecisa ser o ID de cliente da conversão do Google Ads cliente de à conta do Google Ads que fez a chamada. Caso contrário, o upload de conversões vai resultar em umaConversionUploadError.INVALID_CUSTOMER_FOR_CALLerro.O
conversion_valueprecisa ser maior ou igual a zero.A
conversion_date_timeprecisa ter um fuso horário especificado, e o formato é quandoyyyy-mm-dd HH:mm:ss+|-HH:mm, por exemplo:2022-01-01 19:32:45-05:00(ignorando o horário de verão) , O fuso horário pode ter qualquer valor válido: ele não não precisam corresponder ao fuso horário da conta.
Exemplo de código
Java
private void runExample(
GoogleAdsClient googleAdsClient,
long customerId,
String conversionActionId,
String callerId,
String callStartDateTime,
double conversionValue,
Long conversionCustomVariableId,
String conversionCustomVariableValue,
ConsentStatus adUserDataConsent) {
// Create a call conversion by specifying currency as USD.
CallConversion.Builder conversionBuilder =
CallConversion.newBuilder()
.setConversionAction(conversionActionId)
.setCallerId(callerId)
.setCallStartDateTime(callStartDateTime)
.setConversionValue(conversionValue)
.setCurrencyCode("USD");
if (conversionCustomVariableId != null && conversionCustomVariableValue != null) {
conversionBuilder.addCustomVariables(
CustomVariable.newBuilder()
.setConversionCustomVariable(
ResourceNames.conversionCustomVariable(customerId, conversionCustomVariableId))
.setValue(conversionCustomVariableValue));
}
// Sets the consent information, if provided.
if (adUserDataConsent != null) {
// Specifies whether user consent was obtained for the data you are uploading. See
// https://www.google.com/about/company/user-consent-policy for details.
conversionBuilder.setConsent(Consent.newBuilder().setAdUserData(adUserDataConsent));
}
CallConversion conversion = conversionBuilder.build();
// Uploads the call conversion to the API.
try (ConversionUploadServiceClient conversionUploadServiceClient =
googleAdsClient.getLatestVersion().createConversionUploadServiceClient()) {
// Partial failure MUST be enabled for this request.
// NOTE: This request contains a single conversion as a demonstration. However, if you have
// multiple conversions to upload, it's best to upload multiple conversions per request
// instead of sending a separate request per conversion. See the following for per-request
// limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
UploadCallConversionsResponse response =
conversionUploadServiceClient.uploadCallConversions(
UploadCallConversionsRequest.newBuilder()
.setCustomerId(String.valueOf(customerId))
.setCustomerId(Long.toString(customerId))
.addConversions(conversion)
.setPartialFailure(true)
.build());
// Prints any partial failure errors returned.
if (response.hasPartialFailureError()) {
GoogleAdsFailure googleAdsFailure =
ErrorUtils.getInstance().getGoogleAdsFailure(response.getPartialFailureError());
googleAdsFailure
.getErrorsList()
.forEach(e -> System.out.println("Partial failure occurred: " + e.getMessage()));
throw new RuntimeException(
"Partial failure occurred " + response.getPartialFailureError().getMessage());
}
// Prints the result if valid.
CallConversionResult result = response.getResults(0);
System.out.printf(
"Uploaded call conversion that occurred at '%' for caller ID '%' to the conversion"
+ " action with resource name '%'.%n",
result.getCallStartDateTime(), result.getCallerId(), result.getConversionAction());
}
}
C#
public void Run(GoogleAdsClient client, long customerId,
long conversionActionId, string callerId, string callStartTime,
string conversionTime, double conversionValue,
long? conversionCustomVariableId, string conversionCustomVariableValue,
ConsentStatus? adUserDataConsent)
{
// Get the ConversionUploadService.
ConversionUploadServiceClient conversionUploadService =
client.GetService(Services.V17.ConversionUploadService);
// Create a call conversion by specifying currency as USD.
CallConversion callConversion = new CallConversion()
{
ConversionAction = ResourceNames.ConversionAction(customerId, conversionActionId),
CallerId = callerId,
CallStartDateTime = callStartTime,
ConversionDateTime = conversionTime,
ConversionValue = conversionValue,
CurrencyCode = "USD",
};
if (adUserDataConsent != null)
{
// Specifies whether user consent was obtained for the data you are uploading. See
// https://www.google.com/about/company/user-consent-policy
// for details.
callConversion.Consent = new Consent()
{
AdUserData = (ConsentStatus)adUserDataConsent
};
}
if (conversionCustomVariableId != null &&
!string.IsNullOrEmpty(conversionCustomVariableValue))
{
callConversion.CustomVariables.Add(new CustomVariable()
{
ConversionCustomVariable = ResourceNames.ConversionCustomVariable(
customerId, conversionCustomVariableId.Value),
Value = conversionCustomVariableValue
});
}
UploadCallConversionsRequest request = new UploadCallConversionsRequest()
{
CustomerId = customerId.ToString(),
Conversions = { callConversion },
PartialFailure = true
};
try
{
// Issues a request to upload the call conversion. The partialFailure parameter
// is set to true, and validateOnly parameter to false as required by this method
// call.
// NOTE: This request contains a single conversion as a demonstration. However, if
// you have multiple conversions to upload, it's best to upload multiple conversions
// per request instead of sending a separate request per conversion. See the
// following for per-request limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
UploadCallConversionsResponse response =
conversionUploadService.UploadCallConversions(request);
// Since we set partialFailure = true, we can retrieve error messages (if any) from
// the operation response.
if (response.PartialFailureError != null)
{
Console.WriteLine("Call conversion upload failed.");
// Retrieves the errors from the partial failure and prints them.
List<GoogleAdsError> errors =
response.PartialFailure.GetErrorsByOperationIndex(0);
foreach (GoogleAdsError error in errors)
{
Console.WriteLine($"Operation failed with error: {error}.");
}
}
else
{
// Prints the result.
CallConversionResult uploadedCallConversion = response.Results[0];
Console.WriteLine($"Uploaded call conversion that occurred at " +
$"'{uploadedCallConversion.CallStartDateTime}' for caller ID " +
$"'{uploadedCallConversion.CallerId}' to the conversion action with " +
$"resource name '{uploadedCallConversion.ConversionAction}'.");
}
}
catch (GoogleAdsException e)
{
Console.WriteLine("Failure:");
Console.WriteLine($"Message: {e.Message}");
Console.WriteLine($"Failure: {e.Failure}");
Console.WriteLine($"Request ID: {e.RequestId}");
throw;
}
}
PHP
public static function runExample(
GoogleAdsClient $googleAdsClient,
int $customerId,
int $conversionActionId,
string $callerId,
string $callStartDateTime,
string $conversionDateTime,
float $conversionValue,
?string $conversionCustomVariableId,
?string $conversionCustomVariableValue,
?int $adUserDataConsent
) {
// Creates a call conversion by specifying currency as USD.
$callConversion = new CallConversion([
'conversion_action' =>
ResourceNames::forConversionAction($customerId, $conversionActionId),
'caller_id' => $callerId,
'call_start_date_time' => $callStartDateTime,
'conversion_date_time' => $conversionDateTime,
'conversion_value' => $conversionValue,
'currency_code' => 'USD'
]);
if (!is_null($conversionCustomVariableId) && !is_null($conversionCustomVariableValue)) {
$callConversion->setCustomVariables([new CustomVariable([
'conversion_custom_variable' => ResourceNames::forConversionCustomVariable(
$customerId,
$conversionCustomVariableId
),
'value' => $conversionCustomVariableValue
])]);
}
// Sets the consent information, if provided.
if (!empty($adUserDataConsent)) {
// Specifies whether user consent was obtained for the data you are uploading. See
// https://www.google.com/about/company/user-consent-policy for details.
$callConversion->setConsent(new Consent(['ad_user_data' => $adUserDataConsent]));
}
// Issues a request to upload the call conversion.
$conversionUploadServiceClient = $googleAdsClient->getConversionUploadServiceClient();
// NOTE: This request contains a single conversion as a demonstration. However, if you have
// multiple conversions to upload, it's best to upload multiple conversions per request
// instead of sending a separate request per conversion. See the following for per-request
// limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
$response = $conversionUploadServiceClient->uploadCallConversions(
// Partial failure MUST be enabled for this request.
UploadCallConversionsRequest::build($customerId, [$callConversion], true)
);
// Prints the status message if any partial failure error is returned.
// Note: The details of each partial failure error are not printed here, you can refer to
// the example HandlePartialFailure.php to learn more.
if ($response->hasPartialFailureError()) {
printf(
"Partial failures occurred: '%s'.%s",
$response->getPartialFailureError()->getMessage(),
PHP_EOL
);
} else {
// Prints the result if exists.
/** @var CallConversionResult $uploadedCallConversion */
$uploadedCallConversion = $response->getResults()[0];
printf(
"Uploaded call conversion that occurred at '%s' for caller ID '%s' to the "
. "conversion action with resource name '%s'.%s",
$uploadedCallConversion->getCallStartDateTime(),
$uploadedCallConversion->getCallerId(),
$uploadedCallConversion->getConversionAction(),
PHP_EOL
);
}
}
Python
def main(
client,
customer_id,
conversion_action_id,
caller_id,
call_start_date_time,
conversion_date_time,
conversion_value,
conversion_custom_variable_id,
conversion_custom_variable_value,
ad_user_data_consent,
):
"""Imports offline call conversion values for calls related to your ads.
Args:
client: An initialized GoogleAdsClient instance.
customer_id: The client customer ID string.
conversion_action_id: The ID of the conversion action to upload to.
caller_id: The caller ID from which this call was placed. Caller ID is
expected to be in E.164 format with preceding '+' sign,
e.g. '+18005550100'.
call_start_date_time: The date and time at which the call occurred. The
format is 'yyyy-mm-dd hh:mm:ss+|-hh:mm',
e.g. '2021-01-01 12:32:45-08:00'.
conversion_date_time: The the date and time of the conversion (should be
after the click time). The format is 'yyyy-mm-dd hh:mm:ss+|-hh:mm',
e.g. '2021-01-01 12:32:45-08:00'.
conversion_value: The conversion value in the desired currency.
conversion_custom_variable_id: The ID of the conversion custom
variable to associate with the upload.
conversion_custom_variable_value: The str value of the conversion custom
variable to associate with the upload.
ad_user_data_consent: The consent status for ad user data for all
members in the job.
"""
# Get the ConversionUploadService client.
conversion_upload_service = client.get_service("ConversionUploadService")
# Create a call conversion in USD currency.
call_conversion = client.get_type("CallConversion")
call_conversion.conversion_action = client.get_service(
"ConversionActionService"
).conversion_action_path(customer_id, conversion_action_id)
call_conversion.caller_id = caller_id
call_conversion.call_start_date_time = call_start_date_time
call_conversion.conversion_date_time = conversion_date_time
call_conversion.conversion_value = conversion_value
call_conversion.currency_code = "USD"
if conversion_custom_variable_id and conversion_custom_variable_value:
conversion_custom_variable = client.get_type("CustomVariable")
conversion_custom_variable.conversion_custom_variable = (
conversion_custom_variable_id
)
conversion_custom_variable.value = conversion_custom_variable_value
call_conversion.custom_variables.append(conversion_custom_variable)
# Specifies whether user consent was obtained for the data you are
# uploading. For more details. see:
# https://www.google.com/about/company/user-consent-policy
if ad_user_data_consent:
call_conversion.consent.ad_user_data = client.enums.ConsentStatusEnum[
ad_user_data_consent
]
# Issue a request to upload the call conversion.
# Partial failure MUST be enabled for this request.
request = client.get_type("UploadCallConversionsRequest")
request.customer_id = customer_id
request.conversions = [call_conversion]
request.partial_failure = True
# NOTE: This request only uploads a single conversion, but if you have
# multiple conversions to upload, it's most efficient to upload them in a
# single request. See the following for per-request limits for reference:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
upload_call_conversions_response = (
conversion_upload_service.upload_call_conversions(request=request)
)
# Print any partial errors returned.
if upload_call_conversions_response.partial_failure_error:
print(
"Partial error occurred: "
f"'{upload_call_conversions_response.partial_failure_error.message}'"
)
# Print the result if valid.
uploaded_call_conversion = upload_call_conversions_response.results[0]
if uploaded_call_conversion.call_start_date_time:
print(
"Uploaded call conversion that occurred at "
f"'{uploaded_call_conversion.call_start_date_time}' "
f"for caller ID '{uploaded_call_conversion.caller_id}' "
"to the conversion action with resource name "
f"'{uploaded_call_conversion.conversion_action}'."
)
Ruby
def upload_call_conversion(
customer_id,
conversion_action_id,
caller_id,
call_start_date_time,
conversion_date_time,
conversion_value,
conversion_custom_variable_id,
conversion_custom_variable_value,
ad_user_data_consent)
# GoogleAdsClient will read a config file from
# ENV['HOME']/google_ads_config.rb when called without parameters
client = Google::Ads::GoogleAds::GoogleAdsClient.new
# Create a call conversion by specifying currency as USD.
call_conversion = client.resource.call_conversion do |c|
c.conversion_action = client.path.conversion_action(
customer_id, conversion_action_id)
c.caller_id = caller_id
c.call_start_date_time = call_start_date_time
c.conversion_date_time = conversion_date_time
c.conversion_value = conversion_value
c.currency_code = "USD"
if conversion_custom_variable_id && conversion_custom_variable_value
c.custom_variables << client.resource.custom_variable do |cv|
cv.conversion_custom_variable = client.path.conversion_custom_variable(
customer_id, conversion_custom_variable_id)
cv.value = conversion_custom_variable_value
end
end
unless ad_user_data_consent.nil?
c.consent = client.resource.consent do |c|
# Specifies whether user consent was obtained for the data you are
# uploading. For more details, see:
# https://www.google.com/about/company/user-consent-policy
c.ad_user_data = ad_user_data_consent
end
end
end
# Issues a request to upload the call conversion.
response = client.service.conversion_upload.upload_call_conversions(
customer_id: customer_id,
# NOTE: This request only uploads a single conversion, but if you have
# multiple conversions to upload, it's most efficient to upload them in a
# single request. See the following for per-request limits for reference:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
conversions: [call_conversion],
partial_failure: true
)
# Prints errors if any partial failure error is returned.
if response.partial_failure_error
failures = client.decode_partial_failure_error(response.partial_failure_error)
failures.each do |failure|
failure.errors.each do |error|
human_readable_error_path = error
.location
.field_path_elements
.map { |location_info|
if location_info.index
"#{location_info.field_name}[#{location_info.index}]"
else
"#{location_info.field_name}"
end
}.join(" > ")
errmsg = "error occured while adding operations " \
"#{human_readable_error_path}" \
" with value: #{error.trigger.string_value}" \
" because #{error.message.downcase}"
puts errmsg
end
end
else
# Print the result if valid.
uploaded_call_conversion = response.results.first
puts "Uploaded call conversion that occurred at " \
"#{uploaded_call_conversion.call_start_date_time} " \
"for caller ID " \
"#{uploaded_call_conversion.caller_id} " \
"to the conversion action with resource name " \
"#{uploaded_call_conversion.conversion_action}"
end
end
Perl
sub upload_call_conversion {
my (
$api_client, $customer_id,
$conversion_action_id, $caller_id,
$call_start_date_time, $conversion_date_time,
$conversion_value, $conversion_custom_variable_id,
$conversion_custom_variable_value, $ad_user_data_consent
) = @_;
# Create a call conversion by specifying currency as USD.
my $call_conversion =
Google::Ads::GoogleAds::V17::Services::ConversionUploadService::CallConversion
->new({
conversionAction =>
Google::Ads::GoogleAds::V17::Utils::ResourceNames::conversion_action(
$customer_id, $conversion_action_id
),
callerId => $caller_id,
callStartDateTime => $call_start_date_time,
conversionDateTime => $conversion_date_time,
conversionValue => $conversion_value,
currencyCode => "USD"
});
if ($conversion_custom_variable_id && $conversion_custom_variable_value) {
$call_conversion->{customVariables} = [
Google::Ads::GoogleAds::V17::Services::ConversionUploadService::CustomVariable
->new({
conversionCustomVariable =>
Google::Ads::GoogleAds::V17::Utils::ResourceNames::conversion_custom_variable(
$customer_id, $conversion_custom_variable_id
),
value => $conversion_custom_variable_value
})];
}
# Set the consent information, if provided.
if ($ad_user_data_consent) {
# Specify whether user consent was obtained for the data you are uploading.
# See https://www.google.com/about/company/user-consent-policy for details.
$call_conversion->{consent} =
Google::Ads::GoogleAds::V17::Common::Consent->new({
adUserData => $ad_user_data_consent
});
}
# Issue a request to upload the call conversion.
# NOTE: This request contains a single conversion as a demonstration.
# However, if you have multiple conversions to upload, it's best to
# upload multiple conversions per request instead of sending a separate
# request per conversion. See the following for per-request limits:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
my $upload_call_conversions_response =
$api_client->ConversionUploadService()->upload_call_conversions({
customerId => $customer_id,
conversions => [$call_conversion],
partialFailure => "true"
});
# Print any partial errors returned.
if ($upload_call_conversions_response->{partialFailureError}) {
printf "Partial error encountered: '%s'.\n",
$upload_call_conversions_response->{partialFailureError}{message};
}
# Print the result if valid.
my $uploaded_call_conversion =
$upload_call_conversions_response->{results}[0];
if (%$uploaded_call_conversion) {
printf "Uploaded call conversion that occurred at '%s' " .
"for caller ID '%s' to the conversion action with resource name '%s'.\n",
$uploaded_call_conversion->{callStartDateTime},
$uploaded_call_conversion->{callerId},
$uploaded_call_conversion->{conversionAction};
}
return 1;
}