Grup listingan digunakan dalam
Kampanye retail Performa Maksimal untuk menentukan produk yang akan disertakan atau dikecualikan
di setiap grup aset. Dengan demikian, grup listingan diterapkan di AssetGroup
level menggunakan
AssetGroupListingGroupFilter
objek terstruktur dalam jumlah besar. Ini mirip dengan jenis kampanye retail lainnya
grup diterapkan di level AdGroup.
Semua grup aset di kampanye retail Performa Maksimal memerlukan produk yang valid
hierarki partisi yang terdiri dari AssetGroupListingGroupFilter objek. Anda dapat menggunakan
hierarki node tunggal yang mencakup semua produk di akun Merchant Center
memenuhi persyaratan ini.
Ini disebut sebagai produk grup di UI. Anda dapat mengelompokkan menggunakan beberapa dimensi, sehingga Anda dapat menyertakan atau mengecualikan produk.
Pertimbangkan pohon di bawah ini, di mana pada tingkat pertama, produk telah dibagi berdasarkan kondisi menjadi Baru, Bekas, dan kondisi produk lainnya. Di kedua produk di kondisi produk lain telah dibagi menurut merek "MerekKeren" produk, "CheapBrand", dan merek lainnya.
Setiap {i>node<i} pada pohon adalah subdivisi atau unit, seperti yang ditentukan oleh
ListingGroupType Subdivisi
memperkenalkan tingkat baru pada hierarki, sedangkan unit adalah daun pada pohon. Masing-masing
subdivisi harus selalu dipartisi sepenuhnya, sehingga harus berisi node
yang mewakili Lainnya. Dalam contoh, root dan Kondisi Produk:
Node (Lainnya) adalah subdivisi. Struktur pohon ini
dengan subdivisi dan
memungkinkan Anda menetapkan tawaran pada tingkat unit dan juga memastikan bahwa setiap
produk jatuh ke dalam satu dan hanya
satu {i>node<i} unit dalam pohon.
Node adalah objek dari ListingGroupInfo
, yang berisi kelas
Kolom ListingGroupType yang menunjukkan jika
node adalah unit atau subdivisi. Menetapkan ListingGroupInfo ke listing_group
dari AdGroupCriterion akan menautkannya ke
AdGroup
Anda memerlukan minimal satu node unit agar hierarki menjadi valid. Unit itu bisa menjadi {i>root<i} , yang kemudian menjadi "Semua Produk" pembagian. Iklan tidak akan ditayangkan sampai Anda membuat hierarki grup listingan yang valid.
Grup listingan Performa Maksimal
Grup listingan di kampanye Performa Maksimal berfungsi paling efektif saat menarget kelompok produk, jadi ini harus lebih diprioritaskan daripada menargetkan masing-masing berdasarkan ID item. Anda dapat menggunakan dimensi seperti label khusus atau merek di feed produk Anda untuk mengelompokkan produk.
Contoh kode
Java
/**
* Runs the example.
*
* @param googleAdsClient the Google Ads API client.
* @param customerId the client customer ID.
* @param assetGroupId the asset group id for the Performance Max campaign.
* @param replaceExistingTree option to remove existing product tree from the passed in asset
* group.
* @throws GoogleAdsException if an API request failed with one or more service errors.
*/
private void runExample(
GoogleAdsClient googleAdsClient,
long customerId,
long assetGroupId,
boolean replaceExistingTree)
throws Exception {
String assetGroupResourceName = ResourceNames.assetGroup(customerId, assetGroupId);
List<MutateOperation> operations = new ArrayList<>();
if (replaceExistingTree) {
List<AssetGroupListingGroupFilter> existingListingGroupFilters =
getAllExistingListingGroupFilterAssetsInAssetGroup(
googleAdsClient, customerId, assetGroupResourceName);
if (!existingListingGroupFilters.isEmpty()) {
// A special factory object that ensures the creation of remove operations in the
// correct order (child listing group filters must be removed before their parents).
AssetGroupListingGroupFilterRemoveOperationFactory removeOperationFactory =
new AssetGroupListingGroupFilterRemoveOperationFactory(existingListingGroupFilters);
operations.addAll(removeOperationFactory.removeAll());
}
}
// Uses a factory to create all the MutateOperations that manipulate a specific
// AssetGroup for a specific customer. The operations returned by the factory's methods
// are used to construct a new tree of filters. These filters can have parent-child
// relationships, and also include a special root that includes all children.
//
// When creating these filters, temporary IDs are used to create the hierarchy between
// each of the nodes in the tree, beginning with the root listing group filter.
//
// The factory created below is specific to a customerId and assetGroupId.
AssetGroupListingGroupFilterCreateOperationFactory createOperationFactory =
new AssetGroupListingGroupFilterCreateOperationFactory(
customerId, assetGroupId, TEMPORARY_ID_LISTING_GROUP_ROOT);
// Creates the operation to add the root node of the tree.
operations.add(createOperationFactory.createRoot());
// Creates an operation to add a leaf node for new products.
ListingGroupFilterDimension newProductDimension =
ListingGroupFilterDimension.newBuilder()
.setProductCondition(
ProductCondition.newBuilder()
.setCondition(ListingGroupFilterProductCondition.NEW)
.build())
.build();
operations.add(
createOperationFactory.createUnit(
TEMPORARY_ID_LISTING_GROUP_ROOT, createOperationFactory.nextId(), newProductDimension));
// Creates an operation to add a leaf node for used products.
ListingGroupFilterDimension usedProductDimension =
ListingGroupFilterDimension.newBuilder()
.setProductCondition(
ProductCondition.newBuilder()
.setCondition(ListingGroupFilterProductCondition.USED)
.build())
.build();
operations.add(
createOperationFactory.createUnit(
TEMPORARY_ID_LISTING_GROUP_ROOT,
createOperationFactory.nextId(),
usedProductDimension));
// This represents the ID of the "other" category in the ProductCondition subdivision. This ID
// is saved because the node with this ID will be further partitioned, and this ID will serve as
// the parent ID for subsequent child nodes of the "other" category.
long otherSubdivisionId = createOperationFactory.nextId();
// Creates an operation to add a subdivision node for other products in the ProductCondition
// subdivision.
ListingGroupFilterDimension otherProductDimension =
ListingGroupFilterDimension.newBuilder()
.setProductCondition(ProductCondition.newBuilder().build())
.build();
operations.add(
// Calls createSubdivision because this listing group will have children.
createOperationFactory.createSubdivision(
TEMPORARY_ID_LISTING_GROUP_ROOT, otherSubdivisionId, otherProductDimension));
// Creates an operation to add a leaf node for products with the brand "CoolBrand".
ListingGroupFilterDimension coolBrandProductDimension =
ListingGroupFilterDimension.newBuilder()
.setProductBrand(ProductBrand.newBuilder().setValue("CoolBrand").build())
.build();
operations.add(
createOperationFactory.createUnit(
otherSubdivisionId, createOperationFactory.nextId(), coolBrandProductDimension));
// Creates an operation to add a leaf node for products with the brand "CheapBrand".
ListingGroupFilterDimension cheapBrandProductDimension =
ListingGroupFilterDimension.newBuilder()
.setProductBrand(ProductBrand.newBuilder().setValue("CheapBrand").build())
.build();
operations.add(
createOperationFactory.createUnit(
otherSubdivisionId, createOperationFactory.nextId(), cheapBrandProductDimension));
// Creates an operation to add a leaf node for other products in the ProductBrand subdivision.
ListingGroupFilterDimension otherBrandProductDimension =
ListingGroupFilterDimension.newBuilder()
.setProductBrand(ProductBrand.newBuilder().build())
.build();
operations.add(
createOperationFactory.createUnit(
otherSubdivisionId, createOperationFactory.nextId(), otherBrandProductDimension));
try (GoogleAdsServiceClient googleAdsServiceClient =
googleAdsClient.getLatestVersion().createGoogleAdsServiceClient()) {
MutateGoogleAdsRequest request =
MutateGoogleAdsRequest.newBuilder()
.setCustomerId(Long.toString(customerId))
.addAllMutateOperations(operations)
.build();
MutateGoogleAdsResponse response = googleAdsServiceClient.mutate(request);
printResponseDetails(request, response);
}
}
C#
/// <summary>
/// Runs the code example.
/// </summary>
/// <param name="client">The Google Ads client.</param>
/// <param name="customerId">The Google Ads customer ID.</param>
/// <param name="assetGroupId">The asset group id for the Performance Max campaign.</param>
/// <param name="replaceExistingTree">Option to remove existing product tree
/// from the passed in asset group.</param>
public void Run(
GoogleAdsClient client,
long customerId,
long assetGroupId,
bool replaceExistingTree)
{
GoogleAdsServiceClient googleAdsServiceClient =
client.GetService(Services.V17.GoogleAdsService);
string assetGroupResourceName = ResourceNames.AssetGroup(customerId, assetGroupId);
// We use a factory to create all the MutateOperations that manipulate a specific
// AssetGroup for a specific customer. The operations returned by the factory's methods
// are used to optionally remove all AssetGroupListingGroupFilters from the tree, and
// then to construct a new tree of filters. These filters can have a parent-child
// relationship, and also include a special root that includes all children.
//
// When creating these filters, we use temporary IDs to create the hierarchy between
// the root listing group filter, and the subdivisions and leave nodes beneath that.
//
// The factory specific to a customerId and assetGroupId is created below.
AssetGroupListingGroupFilterCreateOperationFactory createOperationFactory =
new AssetGroupListingGroupFilterCreateOperationFactory(
customerId,
assetGroupId,
TEMPORARY_ID_LISTING_GROUP_ROOT
);
MutateGoogleAdsRequest request = new MutateGoogleAdsRequest
{
CustomerId = customerId.ToString()
};
if (replaceExistingTree)
{
List<AssetGroupListingGroupFilter> existingListingGroupFilters =
GetAllExistingListingGroupFilterAssetsInAssetGroup(
client,
customerId,
assetGroupResourceName
);
if (existingListingGroupFilters.Count > 0)
{
// A special factory object that ensures the creation of remove operations in the
// correct order (child listing group filters must be removed before their parents).
AssetGroupListingGroupFilterRemoveOperationFactory removeOperationFactory =
new AssetGroupListingGroupFilterRemoveOperationFactory(
existingListingGroupFilters
);
request.MutateOperations.AddRange(removeOperationFactory.RemoveAll());
}
}
request.MutateOperations.Add(createOperationFactory.CreateRoot());
request.MutateOperations.Add(
createOperationFactory.CreateUnit(
TEMPORARY_ID_LISTING_GROUP_ROOT,
createOperationFactory.NextId(),
new ListingGroupFilterDimension()
{
ProductCondition = new ListingGroupFilterDimension.Types.ProductCondition()
{
Condition = ListingGroupFilterProductCondition.New
}
}
)
);
request.MutateOperations.Add(
createOperationFactory.CreateUnit(
TEMPORARY_ID_LISTING_GROUP_ROOT,
createOperationFactory.NextId(),
new ListingGroupFilterDimension()
{
ProductCondition = new ListingGroupFilterDimension.Types.ProductCondition()
{
Condition = ListingGroupFilterProductCondition.Used
}
}
)
);
// We save this ID because create child nodes underneath it.
long subdivisionIdConditionOther = createOperationFactory.NextId();
request.MutateOperations.Add(
// We're calling CreateSubdivision because this listing group will have children.
createOperationFactory.CreateSubdivision(
TEMPORARY_ID_LISTING_GROUP_ROOT,
subdivisionIdConditionOther,
new ListingGroupFilterDimension()
{
// All sibling nodes must have the same dimension type. We use an empty
// ProductCondition to indicate that this is an "Other" partition.
ProductCondition = new ListingGroupFilterDimension.Types.ProductCondition()
}
)
);
request.MutateOperations.Add(
createOperationFactory.CreateUnit(
subdivisionIdConditionOther,
createOperationFactory.NextId(),
new ListingGroupFilterDimension()
{
ProductBrand = new ProductBrand()
{
Value = "CoolBrand"
}
}
)
);
request.MutateOperations.Add(
createOperationFactory.CreateUnit(
subdivisionIdConditionOther,
createOperationFactory.NextId(),
new ListingGroupFilterDimension()
{
ProductBrand = new ProductBrand()
{
Value = "CheapBrand"
}
}
)
);
request.MutateOperations.Add(
createOperationFactory.CreateUnit(
subdivisionIdConditionOther,
createOperationFactory.NextId(),
new ListingGroupFilterDimension()
{
ProductBrand = new ProductBrand()
}
)
);
MutateGoogleAdsResponse response = googleAdsServiceClient.Mutate(request);
PrintResponseDetails(request, response);
}
PHP
/**
* Runs the example.
*
* @param GoogleAdsClient $googleAdsClient the Google Ads API client
* @param int $customerId the customer ID
* @param int $assetGroupId the asset group ID
* @param bool $replaceExistingTree true if it should replace the existing listing group
* tree on the asset group
*/
public static function runExample(
GoogleAdsClient $googleAdsClient,
int $customerId,
int $assetGroupId,
bool $replaceExistingTree
) {
// We create all the mutate operations that manipulate a specific asset group for a specific
// customer. The operations are used to optionally remove all asset group listing group
// filters from the tree, and then to construct a new tree of filters. These filters can
// have a parent-child relationship, and also include a special root that includes all
// children.
//
// When creating these filters, we use temporary IDs to create the hierarchy between
// the root listing group filter, and the subdivisions and leave nodes beneath that.
$mutateOperations = [];
if ($replaceExistingTree === true) {
$existingListingGroupFilters = self::getAllExistingListingGroupFilterAssetsInAssetGroup(
$googleAdsClient,
$customerId,
ResourceNames::forAssetGroup($customerId, $assetGroupId)
);
if (count($existingListingGroupFilters) > 0) {
$mutateOperations = array_merge(
$mutateOperations,
// Ensures the creation of remove operations in the correct order (child listing
// group filters must be removed before their parents).
self::createMutateOperationsForRemovingListingGroupFiltersTree(
$existingListingGroupFilters
)
);
}
}
$mutateOperations[] = self::createMutateOperationForRoot(
$customerId,
$assetGroupId,
self::LISTING_GROUP_ROOT_TEMPORARY_ID
);
// The temporary ID to be used for creating subdivisions and units.
static $tempId = self::LISTING_GROUP_ROOT_TEMPORARY_ID - 1;
$mutateOperations[] = self::createMutateOperationForUnit(
$customerId,
$assetGroupId,
$tempId--,
self::LISTING_GROUP_ROOT_TEMPORARY_ID,
new ListingGroupFilterDimension([
'product_condition' => new ProductCondition([
'condition' => ListingGroupFilterProductCondition::PBNEW
])
])
);
$mutateOperations[] = self::createMutateOperationForUnit(
$customerId,
$assetGroupId,
$tempId--,
self::LISTING_GROUP_ROOT_TEMPORARY_ID,
new ListingGroupFilterDimension([
'product_condition' => new ProductCondition([
'condition' => ListingGroupFilterProductCondition::USED
])
])
);
// We save this ID to create child nodes underneath it.
$conditionOtherSubdivisionId = $tempId--;
// We're calling createMutateOperationForSubdivision() because this listing group will
// have children.
$mutateOperations[] = self::createMutateOperationForSubdivision(
$customerId,
$assetGroupId,
$conditionOtherSubdivisionId,
self::LISTING_GROUP_ROOT_TEMPORARY_ID,
new ListingGroupFilterDimension([
// All sibling nodes must have the same dimension type. We use an empty
// ProductCondition to indicate that this is an "Other" partition.
'product_condition' => new ProductCondition()
])
);
$mutateOperations[] = self::createMutateOperationForUnit(
$customerId,
$assetGroupId,
$tempId--,
$conditionOtherSubdivisionId,
new ListingGroupFilterDimension(
['product_brand' => new ProductBrand(['value' => 'CoolBrand'])]
)
);
$mutateOperations[] = self::createMutateOperationForUnit(
$customerId,
$assetGroupId,
$tempId--,
$conditionOtherSubdivisionId,
new ListingGroupFilterDimension([
'product_brand' => new ProductBrand(['value' => 'CheapBrand'])
])
);
$mutateOperations[] = self::createMutateOperationForUnit(
$customerId,
$assetGroupId,
$tempId--,
$conditionOtherSubdivisionId,
// All other product brands.
new ListingGroupFilterDimension(['product_brand' => new ProductBrand()])
);
// Issues a mutate request to create everything and prints its information.
$googleAdsServiceClient = $googleAdsClient->getGoogleAdsServiceClient();
$response = $googleAdsServiceClient->mutate(
MutateGoogleAdsRequest::build($customerId, $mutateOperations)
);
self::printResponseDetails($mutateOperations, $response);
}
Python
def main(client, customer_id, asset_group_id, replace_existing_tree):
"""The main method that creates all necessary entities for the example.
Args:
client: an initialized GoogleAdsClient instance.
customer_id: a client customer ID.
asset_group_id: the asset group id for the Performance Max campaign.
replace_existing_tree: option to remove existing product tree from the
passed in asset group.
"""
googleads_service = client.get_service("GoogleAdsService")
asset_group_resource_name = googleads_service.asset_group_path(
customer_id, asset_group_id
)
operations = []
if replace_existing_tree:
# Retrieve a list of existing AssetGroupListingGroupFilters
existing_listing_group_filters = (
get_all_existing_listing_group_filter_assets_in_asset_group(
client, customer_id, asset_group_resource_name
)
)
# If present, create MutateOperations to remove each
# AssetGroupListingGroupFilter and add them to the list of operations.
if existing_listing_group_filters:
remove_operation_factory = (
AssetGroupListingGroupFilterRemoveOperationFactory(
client, existing_listing_group_filters
)
)
operations.extend(remove_operation_factory.remove_all())
create_operation_factory = (
AssetGroupListingGroupFilterCreateOperationFactory(
client,
customer_id,
asset_group_id,
_TEMPORARY_ID_LISTING_GROUP_ROOT,
)
)
operations.append(create_operation_factory.create_root())
new_dimension = client.get_type("ListingGroupFilterDimension")
new_dimension.product_condition.condition = (
client.enums.ListingGroupFilterProductConditionEnum.NEW
)
operations.append(
create_operation_factory.create_unit(
_TEMPORARY_ID_LISTING_GROUP_ROOT,
create_operation_factory.next_id(),
new_dimension,
)
)
used_dimension = client.get_type("ListingGroupFilterDimension")
used_dimension.product_condition.condition = (
client.enums.ListingGroupFilterProductConditionEnum.USED
)
operations.append(
create_operation_factory.create_unit(
_TEMPORARY_ID_LISTING_GROUP_ROOT,
create_operation_factory.next_id(),
used_dimension,
)
)
# We save this ID because create child nodes underneath it.
subdivision_id_condition_other = create_operation_factory.next_id()
# All sibling nodes must have the same dimension type. We use an empty
# product_condition to indicate that this is an "Other" partition.
other_dimension = client.get_type("ListingGroupFilterDimension")
# This triggers the presence of the product_condition field without
# specifying any field values. This is important in order to tell the API
# that this is an "other" node.
other_dimension.product_condition._pb.SetInParent()
# We're calling create_subdivision because this listing group will have
# children.
operations.append(
create_operation_factory.create_subdivision(
_TEMPORARY_ID_LISTING_GROUP_ROOT,
subdivision_id_condition_other,
other_dimension,
)
)
cool_dimension = client.get_type("ListingGroupFilterDimension")
cool_dimension.product_brand.value = "CoolBrand"
operations.append(
create_operation_factory.create_unit(
subdivision_id_condition_other,
create_operation_factory.next_id(),
cool_dimension,
)
)
cheap_dimension = client.get_type("ListingGroupFilterDimension")
cheap_dimension.product_brand.value = "CheapBrand"
operations.append(
create_operation_factory.create_unit(
subdivision_id_condition_other,
create_operation_factory.next_id(),
cheap_dimension,
)
)
empty_dimension = client.get_type("ListingGroupFilterDimension")
# This triggers the presence of the product_brand field without specifying
# any field values. This is important in order to tell the API
# that this is an "other" node.
empty_dimension.product_brand._pb.SetInParent()
operations.append(
create_operation_factory.create_unit(
subdivision_id_condition_other,
create_operation_factory.next_id(),
empty_dimension,
)
)
response = googleads_service.mutate(
customer_id=customer_id, mutate_operations=operations
)
print_response_details(operations, response)
Ruby
def add_performance_max_product_listing_group_tree(
customer_id,
asset_group_id,
replace_existing_tree)
# GoogleAdsClient will read a config file from
# ENV['HOME']/google_ads_config.rb when called without parameters
client = Google::Ads::GoogleAds::GoogleAdsClient.new
asset_group_resource_name = client.path.asset_group(
customer_id,
asset_group_id,
)
# We use a factory to create all the MutateOperations that manipulate a
# specific AssetGroup for a specific customer. The operations returned by the
# factory's methods are used to optionally remove all
# AssetGroupListingGroupFilters from the tree, and then to construct a new
# tree of filters. These filters can have a parent-child relationship, and
# also include a special root that includes all children.
#
# When creating these filters, we use temporary IDs to create the hierarchy
# between the root listing group filter, and the subdivisions and leave nodes
# beneath that.
#
# The factory specific to a customerId and assetGroupId is created below.
create_operation_factory = AssetGroupListingGroupFilterCreateOperationFactory.new(
customer_id,
asset_group_id,
TEMPORARY_ID_LISTING_GROUP_ROOT,
)
operations = []
if replace_existing_tree
existing_listing_group_filters = get_existing_listing_group_filters_in_asset_group(
client,
customer_id,
asset_group_resource_name,
)
if existing_listing_group_filters.length > 0
# A special factory object that ensures the creation of remove operations
# in the correct order (child listing group filters must be removed
# before their parents).
remove_operation_factory = AssetGroupListingGroupFilterRemoveOperationFactory.new(
existing_listing_group_filters
)
operations += remove_operation_factory.remove_all(client)
end
end
operations << create_operation_factory.create_root(client)
operations << create_operation_factory.create_unit(
client,
TEMPORARY_ID_LISTING_GROUP_ROOT,
create_operation_factory.next_id,
client.resource.listing_group_filter_dimension do |dimension|
dimension.product_condition = client.resource.product_condition do |condition|
condition.condition = :NEW
end
end,
)
operations << create_operation_factory.create_unit(
client,
TEMPORARY_ID_LISTING_GROUP_ROOT,
create_operation_factory.next_id,
client.resource.listing_group_filter_dimension do |dimension|
dimension.product_condition = client.resource.product_condition do |condition|
condition.condition = :USED
end
end,
)
# We save this ID because we create child nodes underneath it.
subdivision_id_condition_other = create_operation_factory.next_id
operations << create_operation_factory.create_subdivision(
client,
TEMPORARY_ID_LISTING_GROUP_ROOT,
subdivision_id_condition_other,
client.resource.listing_group_filter_dimension do |dimension|
dimension.product_condition = client.resource.product_condition do |condition|
# All sibling nodes must have the same dimension type. We use an empty
# ProductCondition to indicate that this is an "Other" partition.
end
end,
)
operations << create_operation_factory.create_unit(
client,
subdivision_id_condition_other,
create_operation_factory.next_id,
client.resource.listing_group_filter_dimension do |dimension|
dimension.product_brand = client.resource.product_brand do |brand|
brand.value = 'CoolBrand'
end
end,
)
operations << create_operation_factory.create_unit(
client,
subdivision_id_condition_other,
create_operation_factory.next_id,
client.resource.listing_group_filter_dimension do |dimension|
dimension.product_brand = client.resource.product_brand do |brand|
brand.value = 'CheapBrand'
end
end,
)
operations << create_operation_factory.create_unit(
client,
subdivision_id_condition_other,
create_operation_factory.next_id,
client.resource.listing_group_filter_dimension do |dimension|
dimension.product_brand = client.resource.product_brand do |brand|
end
end,
)
response = client.service.google_ads.mutate(
customer_id: customer_id,
mutate_operations: operations,
)
print_response_details(operations, response)
end
Perl
sub add_performance_max_product_listing_group_tree {
my ($api_client, $customer_id, $asset_group_id, $replace_existing_tree) = @_;
# We create all the mutate operations that manipulate a specific asset group for
# a specific customer. The operations are used to optionally remove all asset
# group listing group filters from the tree, and then to construct a new tree
# of filters. These filters can have a parent-child relationship, and also include
# a special root that includes all children.
#
# When creating these filters, we use temporary IDs to create the hierarchy between
# the root listing group filter, and the subdivisions and leave nodes beneath that.
my $mutate_operations = [];
if (defined $replace_existing_tree) {
my $existing_listing_group_filters =
get_all_existing_listing_group_filter_assets_in_asset_group(
$api_client,
$customer_id,
Google::Ads::GoogleAds::V17::Utils::ResourceNames::asset_group(
$customer_id, $asset_group_id
));
if (scalar @$existing_listing_group_filters > 0) {
push @$mutate_operations,
# Ensure the creation of remove operations in the correct order (child
# listing group filters must be removed before their parents).
@{
create_mutate_operations_for_removing_listing_group_filters_tree(
$existing_listing_group_filters)};
}
}
push @$mutate_operations,
create_mutate_operation_for_root($customer_id, $asset_group_id,
LISTING_GROUP_ROOT_TEMPORARY_ID);
# The temporary ID to be used for creating subdivisions and units.
my $temp_id = LISTING_GROUP_ROOT_TEMPORARY_ID - 1;
push @$mutate_operations,
create_mutate_operation_for_unit(
$customer_id,
$asset_group_id,
$temp_id--,
LISTING_GROUP_ROOT_TEMPORARY_ID,
Google::Ads::GoogleAds::V17::Resources::ListingGroupFilterDimension->new({
productCondition =>
Google::Ads::GoogleAds::V17::Resources::ProductCondition->new({
condition => NEW
})}));
push @$mutate_operations,
create_mutate_operation_for_unit(
$customer_id,
$asset_group_id,
$temp_id--,
LISTING_GROUP_ROOT_TEMPORARY_ID,
Google::Ads::GoogleAds::V17::Resources::ListingGroupFilterDimension->new({
productCondition =>
Google::Ads::GoogleAds::V17::Resources::ProductCondition->new({
condition => USED
})}));
# We save this ID to create child nodes underneath it.
my $condition_other_subdivision_id = $temp_id--;
# We're calling create_mutate_operation_for_subdivision() because this listing
# group will have children.
push @$mutate_operations, create_mutate_operation_for_subdivision(
$customer_id,
$asset_group_id,
$condition_other_subdivision_id,
LISTING_GROUP_ROOT_TEMPORARY_ID,
Google::Ads::GoogleAds::V17::Resources::ListingGroupFilterDimension->new({
# All sibling nodes must have the same dimension type. We use an empty
# ProductCondition to indicate that this is an "Other" partition.
productCondition =>
Google::Ads::GoogleAds::V17::Resources::ProductCondition->new({})}));
push @$mutate_operations,
create_mutate_operation_for_unit(
$customer_id,
$asset_group_id,
$temp_id--,
$condition_other_subdivision_id,
Google::Ads::GoogleAds::V17::Resources::ListingGroupFilterDimension->new({
productBrand =>
Google::Ads::GoogleAds::V17::Resources::ProductBrand->new({
value => "CoolBrand"
})}));
push @$mutate_operations,
create_mutate_operation_for_unit(
$customer_id,
$asset_group_id,
$temp_id--,
$condition_other_subdivision_id,
Google::Ads::GoogleAds::V17::Resources::ListingGroupFilterDimension->new({
productBrand =>
Google::Ads::GoogleAds::V17::Resources::ProductBrand->new({
value => "CheapBrand"
})}));
push @$mutate_operations, create_mutate_operation_for_unit(
$customer_id,
$asset_group_id,
$temp_id--,
$condition_other_subdivision_id,
# All other product brands.
Google::Ads::GoogleAds::V17::Resources::ListingGroupFilterDimension->new({
productBrand =>
Google::Ads::GoogleAds::V17::Resources::ProductBrand->new({})}));
# Issue a mutate request to create everything and print its information.
my $response = $api_client->GoogleAdsService()->mutate({
customerId => $customer_id,
mutateOperations => $mutate_operations
});
print_response_details($mutate_operations, $response);
return 1;
}
Dimensi yang tersedia untuk ListingDimensionInfo
Ada beberapa dimensi listingan yang dapat menjadi bagian dari Performa Maksimal
grup listingan. Jenis ListingDimensionInfo berikut dapat digunakan dengan
Kampanye retail Performa Maksimal:
ProductBrandInfoProductCategoryInfoProductChannelInfoProductConditionInfoProductCustomAttributeInfoProductItemIdInfoProductTypeInfo
Setiap sumber daya menyertakan daftar pelokalan yang didukung dalam
ProductCategoryConstant.ProductCategoryLocalization
kolom tersebut.
Untuk memahami data yang ditampilkan oleh resource, coba metode
Dapatkan contoh Konstanta Kategori Produk.
Node unit lainnya dapat dibuat dengan meneruskan objek kosong
ListingDimensionInfo menjadi ListingGroupInfo.
ID sementara
Kriteria grup aset tidak ditetapkan ID hingga permintaan mutasi yang dibuat
file tersebut akan
diproses oleh server. Namun, ListingGroupInfo menjadi tidak valid hingga
selesai, jadi setiap kali Anda membuat subdivisi, Anda juga harus membuatnya di
minimal satu turunannya dan node Other pada permintaan yang sama.
Untuk menyetel parent_criterion_id dari
ListingGroupInfo untuk node turunan yang dibuat
dalam permintaan induk yang sama, Anda dapat menggunakan kriteria sementara
ID. ID ini berlaku
hanya dalam konteks satu permintaan mutasi. Bilangan bulat negatif apa pun dapat
digunakan sebagai tanda pengenal sementara.