Эта страница переведена с помощью Cloud Translation API.

Внедрение расширенного отслеживания конверсий для потенциальных клиентов

Расширенное преобразование для потенциальных клиентов позволяет повысить точность измерения офлайн-конверсий, загружая конверсии по кликам, которые содержат хешированные идентификаторы пользователей и некоторые дополнительные сведения, которые помогают Google Рекламе связать конверсию с объявлением, которое привело к привлечению потенциального клиента.

Обязательно ознакомьтесь с руководством по началу работы и выполните необходимые условия для повышения конверсии потенциальных клиентов, прежде чем приступать к реализации.

Вы можете загрузить расширенное отслеживание конверсий для потенциальных клиентов через интерфейс Google Рекламы, как описано в Справочном центре , или через API Google Рекламы, как описано в этом руководстве.

Создайте свою интеграцию

Вы можете спроектировать свою интеграцию.

Порядок использования

Ниже приведен общий процесс загрузки расширенного отслеживания конверсий для потенциальных клиентов в API Google Рекламы.

Убедитесь, что вы выполнили необходимые условия, в том числе следующие:
1. Включите отслеживание конверсий.
2. Примите условия использования данных клиента.
3. Настройте теги в формах для потенциальных клиентов на своем сайте.
Подробные инструкции см. в разделе Реализация предварительных условий .
Нормализуйте и хешируйте данные потенциальных клиентов, такие как адрес электронной почты, номер телефона и почтовый адрес.
Поместите нормализованные и хешированные данные о потенциальных клиентах в объекты ClickConversion . Для каждой ClickConversion :
1. Заполните user_identifiers нормализованными и хешированными данными о потенциальных клиентах. Если у вас есть несколько идентификаторов пользователей, создайте отдельный UserIdentifier для каждого из них (до пяти идентификаторов).
2. (Необязательно, но настоятельно рекомендуется) Заполните order_id .
3. (Необязательно) Заполните gclid для наиболее точного измерения.
4. Убедитесь, что вы заполнили поле consent объекта ClickConversion .
5. Задайте для conversion_action имя ресурса ConversionAction с type UPLOAD_CLICKS . Это должно быть имя ресурса ConversionAction созданного вами при реализации предварительных условий .
Загрузите операции создания ClickConversion в ConversionUploadService , задав для partial_failure значение true .
Проверьте свои загрузки.

Лучшие практики

При реализации расширенного отслеживания конверсий для потенциальных клиентов учитывайте следующие рекомендации.

Проверьте идентификатор клиента

При загрузке конверсий в качестве идентификатора клиента должен быть указан аккаунт, содержащий действие-конверсию и отслеживающий конверсии. Чтобы проверить этот параметр, запросите у обслуживающего ресурса Customer Google Рекламы ConversionTrackingSetting . Выполните следующий запрос с помощью GoogleAdsService.SearchStream , чтобы найти значение customer.conversion_tracking_setting.google_ads_conversion_customer .

Включите несколько идентификаторов, если они у вас есть.

Если вы назначаете конверсии order_id , мы настоятельно рекомендуем включить его. Если у вас есть gclid для конверсии, мы рекомендуем отправить его в дополнение к user_identifiers для повышения производительности. Более того, если у вас есть более одного UserIdentifier для преобразования, в том числе несколько может повысить вероятность совпадения. Включите все идентификаторы в одну ClickConversion .

Просмотрите ошибки частичного сбоя при настройке интеграции.

При первой настройке расширенного отслеживания конверсий для интеграции потенциальных клиентов просмотрите и устраните все частичные ошибки в поле partial_failure_error ответа. Если в вашей настройке возникли проблемы, вам нужно будет проверить это поле, чтобы изучить и устранить их. Дополнительные сведения и примеры обработки ошибок при частичном сбое см. в специальном руководстве по частичному сбою.

При просмотре ошибок частичного сбоя обращайтесь к таблице распространенных ошибок в руководстве по устранению неполадок. После того как вы устраните все проблемы, возникшие в результате частичных ошибок, и завершите интеграцию, переключитесь на автономную диагностику данных , чтобы регулярно проверять состояние ваших конверсий.

Пакетная обработка нескольких конверсий в одном запросе

Если вам нужно загрузить несколько конверсий, группируйте операции в одну UploadClickConversionsRequest вместо отправки запроса на загрузку для каждой конверсии.

Ознакомьтесь с руководством по квотам, чтобы узнать об ограничениях на количество конверсий на один запрос.

Если вы хотите, чтобы автономная диагностика данных группировала набор запросов в одном логическом задании, задайте для job_id всех запросов одно и то же значение. Это может быть полезно, если у вас есть одно задание или процесс, который загружает большое количество конверсий с использованием нескольких запросов. Если вы установите для job_id каждого из этих запросов одно и то же значение, вы сможете получить одну запись для задания из job_summaries . Если вместо этого вы позволите Google Ads API присваивать сгенерированное системой значение job_id каждого запроса, job_summaries будет содержать отдельную запись для каждого запроса, что может усложнить анализ общего состояния вашей работы.

Загрузите все доступные события офлайн-конверсий.

Чтобы обеспечить полные и точные отчеты о конверсиях, загрузите все доступные события офлайн-конверсий, в том числе те, которые могли быть получены не из Google Рекламы.

Загрузка всех событий-конверсий приводит к ошибкам CLICK_NOT_FOUND для любых событий, не связанных с Google Рекламой. Поскольку эти ошибки ожидаются при загрузке всех событий конверсии, UploadClickConversionsRequest имеет поле debug_enabled .

Если debug_enabled имеет false или не установлен, Google Ads API выполняет только базовую проверку ввода, пропускает последующие проверки загрузки и возвращает успешный результат, даже если для предоставленных user_identifiers кликов не обнаружено.
Это значение по умолчанию.
Если debug_enabled имеет true , API Google Рекламы выполняет все проверки и возвращает ошибку CLICK_NOT_FOUND для любой ClickConversion , при которой для предоставленных user_identifiers не происходит конверсии Google Рекламы.

Во время разработки и тестирования вы можете установить для debug_enabled true , чтобы помочь выявить проблемы. Например, если у вас есть набор конверсий и user_identifiers , которые, как вы знаете, относятся к конверсиям Google Рекламы, вы можете использовать настройку true , чтобы убедиться, что эти загрузки не приводят к ошибке CLICK_NOT_FOUND . Однако, когда вы продолжите разработку и тестирование, мы рекомендуем установить для debug_enabled значение false чтобы избежать чрезмерных ошибок.

Не используйте внешние данные атрибуции

Не задавайте external_attribution_data для ClickConversion и не указывайте conversion_action , использующее внешнюю модель атрибуции. Google Реклама не поддерживает конверсии с внешней атрибуцией при загрузке с использованием идентификаторов.

Подготовьте данные для загрузки

В целях конфиденциальности перед загрузкой следующие данные необходимо хешировать с использованием SHA-256:

Адрес электронной почты
Номер телефона
Имя
Фамилия
адрес улицы

Не хэшируйте следующие данные:

Страна
Состояние
Город
Почтовый индекс

Чтобы стандартизировать результаты хеширования, перед хешированием одного из этих значений необходимо выполнить следующие действия:

Удалите начальные и конечные пробелы.
Преобразуйте текст в нижний регистр.
Форматируйте номера телефонов по стандарту E164 .
Удалите все точки ( . ), стоящие перед именем домена в адресах электронной почты gmail.com и googlemail.com .

Ява

private String normalizeAndHash(MessageDigest digest, String s)
    throws UnsupportedEncodingException {
  // Normalizes by first converting all characters to lowercase, then trimming spaces.
  String normalized = s.toLowerCase();
  // Removes leading, trailing, and intermediate spaces.
  normalized = normalized.replaceAll("\\s+", "");
  // Hashes the normalized string using the hashing algorithm.
  byte[] hash = digest.digest(normalized.getBytes("UTF-8"));
  StringBuilder result = new StringBuilder();
  for (byte b : hash) {
    result.append(String.format("%02x", b));
  }

  return result.toString();
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google Ads
 * requires removal of any '.' characters preceding {@code gmail.com} or {@code googlemail.com}.
 *
 * @param digest the digest to use to hash the normalized string.
 * @param emailAddress the email address to normalize and hash.
 */
private String normalizeAndHashEmailAddress(MessageDigest digest, String emailAddress)
    throws UnsupportedEncodingException {
  String normalizedEmail = emailAddress.toLowerCase();
  String[] emailParts = normalizedEmail.split("@");
  if (emailParts.length > 1 && emailParts[1].matches("^(gmail|googlemail)\\.com\\s*")) {
    // Removes any '.' characters from the portion of the email address before the domain if the
    // domain is gmail.com or googlemail.com.
    emailParts[0] = emailParts[0].replaceAll("\\.", "");
    normalizedEmail = String.format("%s@%s", emailParts[0], emailParts[1]);
  }
  return normalizeAndHash(digest, normalizedEmail);
}UploadEnhancedConversionsForLeads.java

С#

/// <summary>
/// Normalizes the email address and hashes it. For this use case, Google Ads requires
/// removal of any '.' characters preceding <code>gmail.com</code> or
/// <code>googlemail.com</code>.
/// </summary>
/// <param name="emailAddress">The email address.</param>
/// <returns>The hash code.</returns>
private string NormalizeAndHashEmailAddress(string emailAddress)
{
    string normalizedEmail = emailAddress.ToLower();
    string[] emailParts = normalizedEmail.Split('@');
    if (emailParts.Length > 1 && (emailParts[1] == "gmail.com" ||
        emailParts[1] == "googlemail.com"))
    {
        // Removes any '.' characters from the portion of the email address before
        // the domain if the domain is gmail.com or googlemail.com.
        emailParts[0] = emailParts[0].Replace(".", "");
        normalizedEmail = $"{emailParts[0]}@{emailParts[1]}";
    }
    return NormalizeAndHash(normalizedEmail);
}

/// <summary>
/// Normalizes and hashes a string value.
/// </summary>
/// <param name="value">The value to normalize and hash.</param>
/// <returns>The normalized and hashed value.</returns>
private static string NormalizeAndHash(string value)
{
    return ToSha256String(digest, ToNormalizedValue(value));
}

/// <summary>
/// Hash a string value using SHA-256 hashing algorithm.
/// </summary>
/// <param name="digest">Provides the algorithm for SHA-256.</param>
/// <param name="value">The string value (e.g. an email address) to hash.</param>
/// <returns>The hashed value.</returns>
private static string ToSha256String(SHA256 digest, string value)
{
    byte[] digestBytes = digest.ComputeHash(Encoding.UTF8.GetBytes(value));
    // Convert the byte array into an unhyphenated hexadecimal string.
    return BitConverter.ToString(digestBytes).Replace("-", string.Empty);
}

/// <summary>
/// Removes leading and trailing whitespace and converts all characters to
/// lower case.
/// </summary>
/// <param name="value">The value to normalize.</param>
/// <returns>The normalized value.</returns>
private static string ToNormalizedValue(string value)
{
    return value.Trim().ToLower();
}UploadEnhancedConversionsForLeads.cs

PHP

private static function normalizeAndHash(string $hashAlgorithm, string $value): string
{
    // Normalizes by first converting all characters to lowercase, then trimming spaces.
    $normalized = strtolower($value);
    // Removes leading, trailing, and intermediate spaces.
    $normalized = str_replace(' ', '', $normalized);
    return hash($hashAlgorithm, strtolower(trim($normalized)));
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google
 * Ads requires removal of any '.' characters preceding "gmail.com" or "googlemail.com".
 *
 * @param string $hashAlgorithm the hash algorithm to use
 * @param string $emailAddress the email address to normalize and hash
 * @return string the normalized and hashed email address
 */
private static function normalizeAndHashEmailAddress(
    string $hashAlgorithm,
    string $emailAddress
): string {
    $normalizedEmail = strtolower($emailAddress);
    $emailParts = explode("@", $normalizedEmail);
    if (
        count($emailParts) > 1
        && preg_match('/^(gmail|googlemail)\.com\s*/', $emailParts[1])
    ) {
        // Removes any '.' characters from the portion of the email address before the domain
        // if the domain is gmail.com or googlemail.com.
        $emailParts[0] = str_replace(".", "", $emailParts[0]);
        $normalizedEmail = sprintf('%s@%s', $emailParts[0], $emailParts[1]);
    }
    return self::normalizeAndHash($hashAlgorithm, $normalizedEmail);
}UploadEnhancedConversionsForLeads.php

Питон

def normalize_and_hash_email_address(email_address):
    """Returns the result of normalizing and hashing an email address.

    For this use case, Google Ads requires removal of any '.' characters
    preceding "gmail.com" or "googlemail.com"

    Args:
        email_address: An email address to normalize.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-265 hashed string.
    """
    normalized_email = email_address.lower()
    email_parts = normalized_email.split("@")
    # Checks whether the domain of the email address is either "gmail.com"
    # or "googlemail.com". If this regex does not match then this statement
    # will evaluate to None.
    is_gmail = re.match(r"^(gmail|googlemail)\.com$", email_parts[1])

    # Check that there are at least two segments and the second segment
    # matches the above regex expression validating the email domain name.
    if len(email_parts) > 1 and is_gmail:
        # Removes any '.' characters from the portion of the email address
        # before the domain if the domain is gmail.com or googlemail.com.
        email_parts[0] = email_parts[0].replace(".", "")
        normalized_email = "@".join(email_parts)

    return normalize_and_hash(normalized_email)


def normalize_and_hash(s):
    """Normalizes and hashes a string with SHA-256.

    Private customer data must be hashed during upload, as described at:
    https://support.google.com/google-ads/answer/7474263

    Args:
        s: The string to perform this operation on.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-256 hashed string.
    """
    return hashlib.sha256(s.strip().lower().encode()).hexdigest()upload_enhanced_conversions_for_leads.py

Руби

# Returns the result of normalizing and then hashing the string using the
# provided digest.  Private customer data must be hashed during upload, as
# described at https://support.google.com/google-ads/answer/7474263.
def normalize_and_hash(str)
  # Remove leading and trailing whitespace and ensure all letters are lowercase
  # before hasing.
  Digest::SHA256.hexdigest(str.strip.downcase)
end

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
def normalize_and_hash_email(email)
  email_parts = email.downcase.split("@")
  # Removes any '.' characters from the portion of the email address before the
  # domain if the domain is gmail.com or googlemail.com.
  if email_parts.last =~ /^(gmail|googlemail)\.com\s*/
    email_parts[0] = email_parts[0].gsub('.', '')
  end
  normalize_and_hash(email_parts.join('@'))
endupload_enhanced_conversions_for_leads.rb

Перл

sub normalize_and_hash {
  my $value = shift;

  # Removes leading, trailing, and intermediate spaces.
  $value =~ s/\s+//g;
  return sha256_hex(lc $value);
}

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
sub normalize_and_hash_email_address {
  my $email_address = shift;

  my $normalized_email = lc $email_address;
  my @email_parts      = split('@', $normalized_email);
  if (scalar @email_parts > 1
    && $email_parts[1] =~ /^(gmail|googlemail)\.com\s*/)
  {
    # Remove any '.' characters from the portion of the email address before the
    # domain if the domain is 'gmail.com' or 'googlemail.com'.
    $email_parts[0] =~ s/\.//g;
    $normalized_email = sprintf '%s@%s', $email_parts[0], $email_parts[1];
  }
  return normalize_and_hash($normalized_email);
}upload_enhanced_conversions_for_leads.pl

Загрузка расширенного отслеживания конверсий

В следующих фрагментах показано, как создать загрузку конверсий, содержащую идентификаторы адреса электронной почты и номера телефона, с применением стандартизации и хеширования по мере необходимости. Рекомендуется включать в конверсию gclid и order_id , если они доступны.

Добавьте идентификаторы пользователей в ClickConversion.

Ява

// Creates an empty builder for constructing the click conversion.
ClickConversion.Builder clickConversionBuilder = ClickConversion.newBuilder();

// Extracts user email and phone from the raw data, normalizes and hashes it, then wraps it in
// UserIdentifier objects.
// Creates a separate UserIdentifier object for each. The data in this example is hardcoded, but
// in your application you might read the raw data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE of
// hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting more
// than one of these attributes on the same UserIdentifier will clear all the other members
// of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// UserIdentifier incorrectlyPopulatedUserIdentifier =
//     UserIdentifier.newBuilder()
//         .setHashedEmail("...")
//         .setHashedPhoneNumber("...")
//         .build();

ImmutableMap.Builder<String, String> rawRecordBuilder =
    ImmutableMap.<String, String>builder()
        .put("email", "alex.2@example.com")
        // Phone number to be converted to E.164 format, with a leading '+' as required.
        .put("phone", "+1 800 5550102")
        // This example lets you put conversion details as arguments, but in reality you might
        // store this data alongside other user data, so we include it in this sample user
        // record.
        .put("conversionActionId", Long.toString(conversionActionId))
        .put("conversionDateTime", conversionDateTime)
        .put("conversionValue", Double.toString(conversionValue))
        .put("currencyCode", "USD");

// Adds entries for the optional fields.
if (orderId != null) {
  rawRecordBuilder.put("orderId", orderId);
}
if (gclid != null) {
  rawRecordBuilder.put("gclid", gclid);
}
if (adUserDataConsent != null) {
  rawRecordBuilder.put("adUserDataConsent", adUserDataConsent.name());
}

// Builds the map representing the record.
Map<String, String> rawRecord = rawRecordBuilder.build();

// Creates a SHA256 message digest for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
MessageDigest sha256Digest = MessageDigest.getInstance("SHA-256");

// Creates a list for the user identifiers.
List<UserIdentifier> userIdentifiers = new ArrayList<>();

// Creates a user identifier using the hashed email address, using the normalize and hash method
// specifically for email addresses.
UserIdentifier emailIdentifier =
    UserIdentifier.newBuilder()
        // Optional: specify the user identifier source.
        .setUserIdentifierSource(UserIdentifierSource.FIRST_PARTY)
        // Uses the normalize and hash method specifically for email addresses.
        .setHashedEmail(normalizeAndHashEmailAddress(sha256Digest, rawRecord.get("email")))
        .build();
userIdentifiers.add(emailIdentifier);

// Creates a user identifier using normalized and hashed phone info.
UserIdentifier hashedPhoneNumberIdentifier =
    UserIdentifier.newBuilder()
        .setHashedPhoneNumber(normalizeAndHash(sha256Digest, rawRecord.get("phone")))
        .build();
// Adds the hashed phone number identifier to the UserData object's list.
userIdentifiers.add(hashedPhoneNumberIdentifier);

// Adds the user identifiers to the conversion.
clickConversionBuilder.addAllUserIdentifiers(userIdentifiers);UploadEnhancedConversionsForLeads.java

С#

// Adds a user identifier using the hashed email address, using the normalize
// and hash method specifically for email addresses.
clickConversion.UserIdentifiers.Add(new UserIdentifier()
{
    HashedEmail = NormalizeAndHashEmailAddress("alex.2@example.com"),
    // Optional: Specifies the user identifier source.
    UserIdentifierSource = UserIdentifierSource.FirstParty
});

// Adds a user identifier using normalized and hashed phone info.
clickConversion.UserIdentifiers.Add(new UserIdentifier()
{
    HashedPhoneNumber = NormalizeAndHash("+1 800 5550102"),
    // Optional: Specifies the user identifier source.
    UserIdentifierSource = UserIdentifierSource.FirstParty
});

// Adds a user identifier with all the required mailing address elements.
clickConversion.UserIdentifiers.Add(new UserIdentifier()
{
    AddressInfo = new OfflineUserAddressInfo()
    {
        // FirstName and LastName must be normalized and hashed.
        HashedFirstName = NormalizeAndHash("Alex"),
        HashedLastName = NormalizeAndHash("Quinn"),
        // CountryCode and PostalCode are sent in plain text.
        CountryCode = "US",
        PostalCode = "94045"
    }
});UploadEnhancedConversionsForLeads.cs

PHP

// Creates a click conversion with the specified attributes.
$clickConversion = new ClickConversion();

// Extract user email and phone from the raw data, normalize and hash it, then wrap it in
// UserIdentifier objects. Creates a separate UserIdentifier object for each.
// The data in this example is hardcoded, but in your application you might read the raw
// data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE
// of hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting
// more than one of these attributes on the same UserIdentifier will clear all the other
// members of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// $incorrectlyPopulatedUserIdentifier = new UserIdentifier([
//    'hashed_email' => '...',
//    'hashed_phone_number' => '...'
// ]);

$rawRecord = [
    // Email address that includes a period (.) before the Gmail domain.
    'email' => 'alex.2@example.com',
    // Phone number to be converted to E.164 format, with a leading '+' as required.
    'phone' => '+1 800 5550102',
    // This example lets you input conversion details as arguments, but in reality you might
    // store this data alongside other user data, so we include it in this sample user
    // record.
    'orderId' => $orderId,
    'gclid' => $gclid,
    'conversionActionId' => $conversionActionId,
    'conversionDateTime' => $conversionDateTime,
    'conversionValue' => $conversionValue,
    'currencyCode' => 'USD',
    'adUserDataConsent' => $adUserDataConsent
];

// Creates a list for the user identifiers.
$userIdentifiers = [];

// Uses the SHA-256 hash algorithm for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
$hashAlgorithm = "sha256";

// Creates a user identifier using the hashed email address, using the normalize and hash
// method specifically for email addresses.
$emailIdentifier = new UserIdentifier([
    // Uses the normalize and hash method specifically for email addresses.
    'hashed_email' => self::normalizeAndHashEmailAddress(
        $hashAlgorithm,
        $rawRecord['email']
    ),
    // Optional: Specifies the user identifier source.
    'user_identifier_source' => UserIdentifierSource::FIRST_PARTY
]);
$userIdentifiers[] = $emailIdentifier;

// Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
if (array_key_exists('phone', $rawRecord)) {
    $hashedPhoneNumberIdentifier = new UserIdentifier([
        'hashed_phone_number' => self::normalizeAndHash(
            $hashAlgorithm,
            $rawRecord['phone'],
            true
        )
    ]);
    // Adds the hashed email identifier to the user identifiers list.
    $userIdentifiers[] = $hashedPhoneNumberIdentifier;
}

// Adds the user identifiers to the conversion.
$clickConversion->setUserIdentifiers($userIdentifiers);UploadEnhancedConversionsForLeads.php

Питон

# Extract user email and phone from the raw data, normalize and hash it,
# then wrap it in UserIdentifier objects. Create a separate UserIdentifier
# object for each. The data in this example is hardcoded, but in your
# application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier = client.get_type("UserIdentifier")
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
    # Email address that includes a period (.) before the Gmail domain.
    "email": "alex.2@example.com",
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    "phone": "+1 800 5550102",
    # This example lets you input conversion details as arguments,
    # but in reality you might store this data alongside other user data,
    # so we include it in this sample user record.
    "order_id": order_id,
    "gclid": gclid,
    "conversion_action_id": conversion_action_id,
    "conversion_date_time": conversion_date_time,
    "conversion_value": conversion_value,
    "currency_code": "USD",
    "ad_user_data_consent": ad_user_data_consent,
}

# Constructs the click conversion.
click_conversion = client.get_type("ClickConversion")
# Creates a user identifier using the hashed email address, using the
# normalize and hash method specifically for email addresses.
email_identifier = client.get_type("UserIdentifier")
# Optional: Specifies the user identifier source.
email_identifier.user_identifier_source = (
    client.enums.UserIdentifierSourceEnum.FIRST_PARTY
)
# Uses the normalize and hash method specifically for email addresses.
email_identifier.hashed_phone_number = normalize_and_hash_email_address(
    raw_record["email"]
)
# Adds the user identifier to the conversion.
click_conversion.user_identifiers.append(email_identifier)

# Checks if the record has a phone number, and if so, adds a UserIdentifier
# for it.
if raw_record.get("phone") is not None:
    phone_identifier = client.get_type("UserIdentifier")
    phone_identifier.hashed_phone_number = normalize_and_hash(
        raw_record["phone"]
    )
    # Adds the phone identifier to the conversion adjustment.
    click_conversion.user_identifiers.append(phone_identifier)upload_enhanced_conversions_for_leads.py

Руби

# Extract user email and phone from the raw data, normalize and hash it,
# then wrap it in UserIdentifier objects. Create a separate UserIdentifier
# object for each. The data in this example is hardcoded, but in your
# application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
  # Email address that includes a period (.) before the Gmail domain.
  "email" => "alex.2@example.com",
  # Phone number to be converted to E.164 format, with a leading '+' as
  # required.
  "phone" => "+1 800 5550102",
  # This example lets you input conversion details as arguments,
  # but in reality you might store this data alongside other user data,
  # so we include it in this sample user record.
  "order_id" => order_id,
  "gclid" => gclid,
  "conversion_action_id" => conversion_action_id,
  "conversion_date_time" => conversion_date_time,
  "conversion_value" => conversion_value,
  "currency_code" => "USD",
  "ad_user_data_consent" => ad_user_data_consent,
}

click_conversion = client.resource.click_conversion do |cc|
  cc.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
  cc.conversion_date_time = conversion_date_time
  cc.conversion_value = conversion_value.to_f
  cc.currency_code = 'USD'

  unless order_id.nil?
    cc.order_id = order_id
  end

  unless raw_record["gclid"].nil?
    cc.gclid = gclid
  end

  # Specifies whether user consent was obtained for the data you are
  # uploading. For more details, see:
  # https://www.google.com/about/company/user-consent-policy
  unless raw_record["ad_user_data_consent"].nil?
    cc.consent = client.resource.consent do |c|
      c.ad_user_data = ad_user_data_consent
    end
  end

  # Creates a user identifier using the hashed email address, using the
  # normalize and hash method specifically for email addresses.
  # If using a phone number, use the normalize_and_hash method instead.
  cc.user_identifiers << client.resource.user_identifier do |ui|
    ui.hashed_phone_number = normalize_and_hash_email(raw_record["email"])
    # Optional: Specifies the user identifier source.
    ui.user_identifier_source = :FIRST_PARTY
  end

  # Checks if the record has a phone number, and if so, adds a UserIdentifier
  # for it.
  unless raw_record["phone"].nil?
    cc.user_identifiers << client.resource.user_identifier do |ui|
      ui.hashed_phone_number = normalize_and_hash_email(raw_record["phone"])
    end
  end
endupload_enhanced_conversions_for_leads.rb

Перл

# Create an empty click conversion.
my $click_conversion =
  Google::Ads::GoogleAds::V18::Services::ConversionUploadService::ClickConversion
  ->new({});

# Extract user email and phone from the raw data, normalize and hash it,
# then wrap it in UserIdentifier objects. Create a separate UserIdentifier
# object for each.
# The data in this example is hardcoded, but in your application
# you might read the raw data from an input file.
#
# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
# only ONE of hashed_email, hashed_phone_number, mobile_id, third_party_user_id,
# or address-info. Setting more than one of these attributes on the same UserIdentifier
# will clear all the other members of the oneof. For example, the following code is
# INCORRECT and will result in a UserIdentifier with ONLY a hashed_phone_number:
#
# my $incorrect_user_identifier = Google::Ads::GoogleAds::V18::Common::UserIdentifier->new({
#   hashedEmail => '...',
#   hashedPhoneNumber => '...',
# });
my $raw_record = {
  # Email address that includes a period (.) before the Gmail domain.
  email => 'alex.2@example.com',
  # Phone number to be converted to E.164 format, with a leading '+' as
  # required.
  phone => '+1 800 5550102',
  # This example lets you input conversion details as arguments,
  # but in reality you might store this data alongside other user data,
  # so we include it in this sample user record.
  orderId            => $order_id,
  gclid              => $gclid,
  conversionActionId => $conversion_action_id,
  conversionDateTime => $conversion_date_time,
  conversionValue    => $conversion_value,
  currencyCode       => "USD",
  adUserDataConsent  => $ad_user_data_consent
};
my $user_identifiers = [];

# Create a user identifier using the hashed email address, using the normalize
# and hash method specifically for email addresses.
my $hashed_email = normalize_and_hash_email_address($raw_record->{email});
push(
  @$user_identifiers,
  Google::Ads::GoogleAds::V18::Common::UserIdentifier->new({
      hashedEmail => $hashed_email,
      # Optional: Specify the user identifier source.
      userIdentifierSource => FIRST_PARTY
    }));

# Create a user identifier using normalized and hashed phone info.
my $hashed_phone = normalize_and_hash($raw_record->{phone});
push(
  @$user_identifiers,
  Google::Ads::GoogleAds::V18::Common::UserIdentifier->new({
      hashedPhone => $hashed_phone,
      # Optional: Specify the user identifier source.
      userIdentifierSource => FIRST_PARTY
    }));

# Add the user identifiers to the conversion.
$click_conversion->{userIdentifiers} = $user_identifiers;upload_enhanced_conversions_for_leads.pl

Добавьте сведения о конверсии в ClickConversion.

Ява

// Adds details of the conversion.
clickConversionBuilder.setConversionAction(
    ResourceNames.conversionAction(
        customerId, Long.parseLong(rawRecord.get("conversionActionId"))));
clickConversionBuilder.setConversionDateTime(rawRecord.get("conversionDateTime"));
clickConversionBuilder.setConversionValue(Double.parseDouble(rawRecord.get("conversionValue")));
clickConversionBuilder.setCurrencyCode(rawRecord.get("currencyCode"));

// Sets the order ID if provided.
if (rawRecord.containsKey("orderId")) {
  clickConversionBuilder.setOrderId(rawRecord.get("orderId"));
}

// Sets the Google click ID (gclid) if provided.
if (rawRecord.containsKey("gclid")) {
  clickConversionBuilder.setGclid(rawRecord.get("gclid"));
}

// Sets the consent information, if provided.
if (rawRecord.containsKey("adUserDataConsent")) {
  // Specifies whether user consent was obtained for the data you are uploading. See
  // https://www.google.com/about/company/user-consent-policy for details.
  clickConversionBuilder.setConsent(
      Consent.newBuilder()
          .setAdUserData(ConsentStatus.valueOf(rawRecord.get("adUserDataConsent"))));
}

// Calls build to build the conversion.
ClickConversion clickConversion = clickConversionBuilder.build();UploadEnhancedConversionsForLeads.java

С#

// Adds details of the conversion.
clickConversion.ConversionAction =
    ResourceNames.ConversionAction(customerId, conversionActionId);
clickConversion.ConversionDateTime = conversionDateTime;
clickConversion.ConversionValue = conversionValue;
clickConversion.CurrencyCode = "USD";

// Sets the order ID if provided.
if (!string.IsNullOrEmpty(orderId))
{
    clickConversion.OrderId = orderId;
}

// Sets the Google click ID (gclid) if provided.
if (!string.IsNullOrEmpty(gclid))
{
    clickConversion.Gclid = gclid;
}
UploadEnhancedConversionsForLeads.cs

PHP

// Adds details of the conversion.
$clickConversion->setConversionAction(
    ResourceNames::forConversionAction($customerId, $rawRecord['conversionActionId'])
);
$clickConversion->setConversionDateTime($rawRecord['conversionDateTime']);
$clickConversion->setConversionValue($rawRecord['conversionValue']);
$clickConversion->setCurrencyCode($rawRecord['currencyCode']);

// Sets the order ID if provided.
if (!empty($rawRecord['orderId'])) {
    $clickConversion->setOrderId($rawRecord['orderId']);
}

// Sets the Google click ID (gclid) if provided.
if (!empty($rawRecord['gclid'])) {
    $clickConversion->setGclid($rawRecord['gclid']);
}

// Sets the ad user data consent if provided.
if (!empty($rawRecord['adUserDataConsent'])) {
    // Specifies whether user consent was obtained for the data you are uploading. See
    // https://www.google.com/about/company/user-consent-policy for details.
    $clickConversion->setConsent(
        new Consent(['ad_user_data' => $rawRecord['adUserDataConsent']])
    );
}UploadEnhancedConversionsForLeads.php

Питон

# Add details of the conversion.
# Gets the conversion action resource name.
conversion_action_service = client.get_service("ConversionActionService")
click_conversion.conversion_action = (
    conversion_action_service.conversion_action_path(
        customer_id, raw_record["conversion_action_id"]
    )
)
click_conversion.conversion_date_time = raw_record["conversion_date_time"]
click_conversion.conversion_value = raw_record["conversion_value"]
click_conversion.currency_code = raw_record["currency_code"]

# Sets the order ID if provided.
if raw_record.get("order_id"):
    click_conversion.order_id = raw_record["order_id"]

# Sets the gclid if provided.
if raw_record.get("gclid"):
    click_conversion.gclid = raw_record["gclid"]

# Specifies whether user consent was obtained for the data you are
# uploading. For more details, see:
# https://www.google.com/about/company/user-consent-policy
if raw_record["ad_user_data_consent"]:
    click_conversion.consent.ad_user_data = client.enums.ConsentStatusEnum[
        raw_record["ad_user_data_consent"]
    ]upload_enhanced_conversions_for_leads.py

Руби

cc.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
cc.conversion_date_time = conversion_date_time
cc.conversion_value = conversion_value.to_f
cc.currency_code = 'USD'

unless order_id.nil?
  cc.order_id = order_id
end

unless raw_record["gclid"].nil?
  cc.gclid = gclid
end

# Specifies whether user consent was obtained for the data you are
# uploading. For more details, see:
# https://www.google.com/about/company/user-consent-policy
unless raw_record["ad_user_data_consent"].nil?
  cc.consent = client.resource.consent do |c|
    c.ad_user_data = ad_user_data_consent
  end
endupload_enhanced_conversions_for_leads.rb

Перл

# Add details of the conversion.
$click_conversion->{conversionAction} =
  Google::Ads::GoogleAds::V18::Utils::ResourceNames::conversion_action(
  $customer_id, $raw_record->{conversionActionId});
$click_conversion->{conversionDateTime} = $raw_record->{conversionDateTime};
$click_conversion->{conversionValue}    = $raw_record->{conversionValue};
$click_conversion->{currencyCode}       = $raw_record->{currencyCode};

# Set the order ID if provided.
if (defined $raw_record->{orderId}) {
  $click_conversion->{orderId} = $raw_record->{orderId};
}

# Set the Google click ID (gclid) if provided.
if (defined $raw_record->{gclid}) {
  $click_conversion->{gclid} = $raw_record->{gclid};
}

# Set the consent information, if provided.
if (defined $raw_record->{adUserDataConsent}) {
  $click_conversion->{consent} =
    Google::Ads::GoogleAds::V18::Common::Consent->new({
      adUserData => $raw_record->{adUserDataConsent}});
}upload_enhanced_conversions_for_leads.pl

Загрузите ClickConversion

Ява

// Creates the conversion upload service client.
try (ConversionUploadServiceClient conversionUploadServiceClient =
    googleAdsClient.getLatestVersion().createConversionUploadServiceClient()) {
  // Uploads the click conversion. Partial failure should always be set to true.

  // NOTE: This request contains a single conversion as a demonstration.  However, if you have
  // multiple conversions to upload, it's best to upload multiple conversions per request
  // instead of sending a separate request per conversion. See the following for per-request
  // limits:
  // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
  UploadClickConversionsResponse response =
      conversionUploadServiceClient.uploadClickConversions(
          UploadClickConversionsRequest.newBuilder()
              .setCustomerId(Long.toString(customerId))
              .addConversions(clickConversion)
              // Enables partial failure (must be true).
              .setPartialFailure(true)
              .build());UploadEnhancedConversionsForLeads.java

С#

// Uploads the click conversion. Partial failure should always be set to true.
// NOTE: This request contains a single conversion as a demonstration.
// However, if you have multiple conversions to upload, it's best to upload multiple
// conversions per request instead of sending a separate request per conversion.
// See the following for per-request limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload
UploadClickConversionsResponse response =
    conversionUploadService.UploadClickConversions(
        new UploadClickConversionsRequest()
        {
            CustomerId = customerId.ToString(),
            Conversions = { clickConversion },
            // Enables partial failure (must be true).
            PartialFailure = true
        });
UploadEnhancedConversionsForLeads.cs

PHP

// Issues a request to upload the click conversion.
$conversionUploadServiceClient = $googleAdsClient->getConversionUploadServiceClient();
// NOTE: This request contains a single conversion as a demonstration.  However, if you have
// multiple conversions to upload, it's best to upload multiple conversions per request
// instead of sending a separate request per conversion. See the following for per-request
// limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
$response = $conversionUploadServiceClient->uploadClickConversions(
    // Enables partial failure (must be true).
    UploadClickConversionsRequest::build($customerId, [$clickConversion], true)
);UploadEnhancedConversionsForLeads.php

Питон

# Creates the conversion upload service client.
conversion_upload_service = client.get_service("ConversionUploadService")
# Uploads the click conversion. Partial failure should always be set to
# True.
# NOTE: This request only uploads a single conversion, but if you have
# multiple conversions to upload, it's most efficient to upload them in a
# single request. See the following for per-request limits for reference:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
response = conversion_upload_service.upload_click_conversions(
    customer_id=customer_id,
    conversions=[click_conversion],
    # Enables partial failure (must be true).
    partial_failure=True,
)upload_enhanced_conversions_for_leads.py

Руби

response = client.service.conversion_upload.upload_click_conversions(
  customer_id: customer_id,
  conversions: [click_conversion],
  # Partial failure must be true.
  partial_failure: true,
)

if response.partial_failure_error
  puts "Partial failure encountered: #{response.partial_failure_error.message}"
else
  result = response.results.first
  puts "Uploaded click conversion that happened at #{result.conversion_date_time} " \
    "to #{result.conversion_action}."
endupload_enhanced_conversions_for_leads.rb

Перл

# Upload the click conversion. Partial failure should always be set to true.
#
# NOTE: This request contains a single conversion as a demonstration.
# However, if you have multiple conversions to upload, it's best to
# upload multiple conversions per request instead of sending a separate
# request per conversion. See the following for per-request limits:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
my $response =
  $api_client->ConversionUploadService()->upload_click_conversions({
    customerId  => $customer_id,
    conversions => [$click_conversion],
    # Enable partial failure (must be true).
    partialFailure => "true"
  });upload_enhanced_conversions_for_leads.pl

Проверьте свои загрузки

Используйте автономную диагностику данных , чтобы оценить общее состояние ваших недавних загрузок. Обратите внимание, что успешная загрузка не обязательно означает, что загрузки имеют совпадения.

При составлении отчетов по показателям конверсий для ваших кампаний см. раздел Сопоставление показателей пользовательского интерфейса , чтобы сопоставить показатели пользовательского интерфейса Google Рекламы с полями отчетов API Google Рекламы. Вы также можете запросить ресурс conversion_action чтобы просмотреть общее количество конверсий и общую ценность конверсии для определенного действия-конверсии.

Следующие шаги

Если вам необходимо скорректировать конверсии, обратитесь к руководству по корректировке конверсий при загрузке .

Инструкции по устранению неполадок расширенного преобразования конверсий для интеграции потенциальных клиентов см. в руководстве по устранению неполадок .

Обязательно ознакомьтесь с руководством по началу работы и выполните необходимые условия для повышения конверсии потенциальных клиентов, прежде чем приступать к внедрению.

Создайте свою интеграцию

Вы можете спроектировать свою интеграцию.

Порядок использования

Убедитесь, что вы выполнили необходимые условия, в том числе следующие:
1. Включите отслеживание конверсий.
2. Примите условия использования данных клиента.
3. Настройте теги в формах для потенциальных клиентов на своем сайте.
Подробные инструкции см. в разделе Реализация предварительных условий .
Нормализуйте и хешируйте данные потенциальных клиентов, такие как адрес электронной почты, номер телефона и почтовый адрес.
Поместите нормализованные и хешированные данные о потенциальных клиентах в объекты ClickConversion . Для каждой ClickConversion :
1. Заполните user_identifiers нормализованными и хешированными данными о потенциальных клиентах. Если у вас есть несколько идентификаторов пользователей, создайте отдельный UserIdentifier для каждого из них (до пяти идентификаторов).
2. (Необязательно, но настоятельно рекомендуется) Заполните order_id .
3. (Необязательно) Заполните gclid для наиболее точного измерения.
4. Убедитесь, что вы заполнили поле consent объекта ClickConversion .
5. Задайте для conversion_action имя ресурса ConversionAction с type UPLOAD_CLICKS . Это должно быть имя ресурса ConversionAction созданного вами при реализации предварительных условий .
Загрузите операции создания ClickConversion в ConversionUploadService , задав для partial_failure значение true .
Проверьте свои загрузки.

Лучшие практики

Проверьте идентификатор клиента

Включите несколько идентификаторов, если они у вас есть.

Если вы назначаете конверсии order_id , мы настоятельно рекомендуем включить его. Если у вас есть gclid для конверсии, мы рекомендуем отправить его в дополнение к user_identifiers для повышения производительности. Кроме того, если у вас есть более одного UserIdentifier для преобразования, в том числе несколько может повысить вероятность совпадения. Включите все идентификаторы в одну ClickConversion .

Просмотрите ошибки частичного сбоя при настройке интеграции.

При первой настройке расширенного отслеживания конверсий для интеграции потенциальных клиентов проверьте и устраните все частичные ошибки в поле partial_failure_error ответа. Если в вашей настройке возникли проблемы, вам нужно будет проверить это поле, чтобы изучить и устранить их. Дополнительные сведения и примеры обработки ошибок при частичном сбое см. в специальном руководстве по частичному сбою.

При просмотре ошибок частичного сбоя обращайтесь к таблице распространенных ошибок в руководстве по устранению неполадок. После того как вы устраните все проблемы, возникающие в результате частичных сбоев, и завершите интеграцию, переключитесь на автономную диагностику данных , чтобы регулярно проверять состояние ваших конверсий.

Пакетная обработка нескольких конверсий в одном запросе

Ознакомьтесь с руководством по квотам, чтобы узнать об ограничениях на количество конверсий на один запрос.

Загрузите все доступные события офлайн-конверсий.

Если debug_enabled имеет false или не установлен, Google Ads API выполняет только базовую проверку ввода, пропускает последующие проверки загрузки и возвращает успешный результат, даже если для предоставленных user_identifiers кликов не обнаружено.
Это значение по умолчанию.
Если debug_enabled имеет true , API Google Рекламы выполняет все проверки и возвращает ошибку CLICK_NOT_FOUND для любой ClickConversion , при которой для предоставленных user_identifiers не происходит конверсии Google Рекламы.

Не используйте внешние данные атрибуции

Подготовьте данные для загрузки

В целях конфиденциальности перед загрузкой следующие данные необходимо хешировать с использованием SHA-256:

Адрес электронной почты
Номер телефона
Имя
Фамилия
адрес улицы

Не хэшируйте следующие данные:

Страна
Состояние
Город
Почтовый индекс

Чтобы стандартизировать результаты хэширования, перед хешированием одного из этих значений необходимо выполнить следующие действия:

Удалите начальные и конечные пробелы.
Преобразуйте текст в нижний регистр.
Форматируйте номера телефонов по стандарту E164 .
Удалите все точки ( . ), стоящие перед именем домена в адресах электронной почты gmail.com и googlemail.com .

Ява

private String normalizeAndHash(MessageDigest digest, String s)
    throws UnsupportedEncodingException {
  // Normalizes by first converting all characters to lowercase, then trimming spaces.
  String normalized = s.toLowerCase();
  // Removes leading, trailing, and intermediate spaces.
  normalized = normalized.replaceAll("\\s+", "");
  // Hashes the normalized string using the hashing algorithm.
  byte[] hash = digest.digest(normalized.getBytes("UTF-8"));
  StringBuilder result = new StringBuilder();
  for (byte b : hash) {
    result.append(String.format("%02x", b));
  }

  return result.toString();
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google Ads
 * requires removal of any '.' characters preceding {@code gmail.com} or {@code googlemail.com}.
 *
 * @param digest the digest to use to hash the normalized string.
 * @param emailAddress the email address to normalize and hash.
 */
private String normalizeAndHashEmailAddress(MessageDigest digest, String emailAddress)
    throws UnsupportedEncodingException {
  String normalizedEmail = emailAddress.toLowerCase();
  String[] emailParts = normalizedEmail.split("@");
  if (emailParts.length > 1 && emailParts[1].matches("^(gmail|googlemail)\\.com\\s*")) {
    // Removes any '.' characters from the portion of the email address before the domain if the
    // domain is gmail.com or googlemail.com.
    emailParts[0] = emailParts[0].replaceAll("\\.", "");
    normalizedEmail = String.format("%s@%s", emailParts[0], emailParts[1]);
  }
  return normalizeAndHash(digest, normalizedEmail);
}UploadEnhancedConversionsForLeads.java

С#

/// <summary>
/// Normalizes the email address and hashes it. For this use case, Google Ads requires
/// removal of any '.' characters preceding <code>gmail.com</code> or
/// <code>googlemail.com</code>.
/// </summary>
/// <param name="emailAddress">The email address.</param>
/// <returns>The hash code.</returns>
private string NormalizeAndHashEmailAddress(string emailAddress)
{
    string normalizedEmail = emailAddress.ToLower();
    string[] emailParts = normalizedEmail.Split('@');
    if (emailParts.Length > 1 && (emailParts[1] == "gmail.com" ||
        emailParts[1] == "googlemail.com"))
    {
        // Removes any '.' characters from the portion of the email address before
        // the domain if the domain is gmail.com or googlemail.com.
        emailParts[0] = emailParts[0].Replace(".", "");
        normalizedEmail = $"{emailParts[0]}@{emailParts[1]}";
    }
    return NormalizeAndHash(normalizedEmail);
}

/// <summary>
/// Normalizes and hashes a string value.
/// </summary>
/// <param name="value">The value to normalize and hash.</param>
/// <returns>The normalized and hashed value.</returns>
private static string NormalizeAndHash(string value)
{
    return ToSha256String(digest, ToNormalizedValue(value));
}

/// <summary>
/// Hash a string value using SHA-256 hashing algorithm.
/// </summary>
/// <param name="digest">Provides the algorithm for SHA-256.</param>
/// <param name="value">The string value (e.g. an email address) to hash.</param>
/// <returns>The hashed value.</returns>
private static string ToSha256String(SHA256 digest, string value)
{
    byte[] digestBytes = digest.ComputeHash(Encoding.UTF8.GetBytes(value));
    // Convert the byte array into an unhyphenated hexadecimal string.
    return BitConverter.ToString(digestBytes).Replace("-", string.Empty);
}

/// <summary>
/// Removes leading and trailing whitespace and converts all characters to
/// lower case.
/// </summary>
/// <param name="value">The value to normalize.</param>
/// <returns>The normalized value.</returns>
private static string ToNormalizedValue(string value)
{
    return value.Trim().ToLower();
}UploadEnhancedConversionsForLeads.cs

PHP

private static function normalizeAndHash(string $hashAlgorithm, string $value): string
{
    // Normalizes by first converting all characters to lowercase, then trimming spaces.
    $normalized = strtolower($value);
    // Removes leading, trailing, and intermediate spaces.
    $normalized = str_replace(' ', '', $normalized);
    return hash($hashAlgorithm, strtolower(trim($normalized)));
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google
 * Ads requires removal of any '.' characters preceding "gmail.com" or "googlemail.com".
 *
 * @param string $hashAlgorithm the hash algorithm to use
 * @param string $emailAddress the email address to normalize and hash
 * @return string the normalized and hashed email address
 */
private static function normalizeAndHashEmailAddress(
    string $hashAlgorithm,
    string $emailAddress
): string {
    $normalizedEmail = strtolower($emailAddress);
    $emailParts = explode("@", $normalizedEmail);
    if (
        count($emailParts) > 1
        && preg_match('/^(gmail|googlemail)\.com\s*/', $emailParts[1])
    ) {
        // Removes any '.' characters from the portion of the email address before the domain
        // if the domain is gmail.com or googlemail.com.
        $emailParts[0] = str_replace(".", "", $emailParts[0]);
        $normalizedEmail = sprintf('%s@%s', $emailParts[0], $emailParts[1]);
    }
    return self::normalizeAndHash($hashAlgorithm, $normalizedEmail);
}UploadEnhancedConversionsForLeads.php

Питон

def normalize_and_hash_email_address(email_address):
    """Returns the result of normalizing and hashing an email address.

    For this use case, Google Ads requires removal of any '.' characters
    preceding "gmail.com" or "googlemail.com"

    Args:
        email_address: An email address to normalize.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-265 hashed string.
    """
    normalized_email = email_address.lower()
    email_parts = normalized_email.split("@")
    # Checks whether the domain of the email address is either "gmail.com"
    # or "googlemail.com". If this regex does not match then this statement
    # will evaluate to None.
    is_gmail = re.match(r"^(gmail|googlemail)\.com$", email_parts[1])

    # Check that there are at least two segments and the second segment
    # matches the above regex expression validating the email domain name.
    if len(email_parts) > 1 and is_gmail:
        # Removes any '.' characters from the portion of the email address
        # before the domain if the domain is gmail.com or googlemail.com.
        email_parts[0] = email_parts[0].replace(".", "")
        normalized_email = "@".join(email_parts)

    return normalize_and_hash(normalized_email)


def normalize_and_hash(s):
    """Normalizes and hashes a string with SHA-256.

    Private customer data must be hashed during upload, as described at:
    https://support.google.com/google-ads/answer/7474263

    Args:
        s: The string to perform this operation on.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-256 hashed string.
    """
    return hashlib.sha256(s.strip().lower().encode()).hexdigest()upload_enhanced_conversions_for_leads.py

Руби

# Returns the result of normalizing and then hashing the string using the
# provided digest.  Private customer data must be hashed during upload, as
# described at https://support.google.com/google-ads/answer/7474263.
def normalize_and_hash(str)
  # Remove leading and trailing whitespace and ensure all letters are lowercase
  # before hasing.
  Digest::SHA256.hexdigest(str.strip.downcase)
end

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
def normalize_and_hash_email(email)
  email_parts = email.downcase.split("@")
  # Removes any '.' characters from the portion of the email address before the
  # domain if the domain is gmail.com or googlemail.com.
  if email_parts.last =~ /^(gmail|googlemail)\.com\s*/
    email_parts[0] = email_parts[0].gsub('.', '')
  end
  normalize_and_hash(email_parts.join('@'))
endupload_enhanced_conversions_for_leads.rb

Перл

sub normalize_and_hash {
  my $value = shift;

  # Removes leading, trailing, and intermediate spaces.
  $value =~ s/\s+//g;
  return sha256_hex(lc $value);
}

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
sub normalize_and_hash_email_address {
  my $email_address = shift;

  my $normalized_email = lc $email_address;
  my @email_parts      = split('@', $normalized_email);
  if (scalar @email_parts > 1
    && $email_parts[1] =~ /^(gmail|googlemail)\.com\s*/)
  {
    # Remove any '.' characters from the portion of the email address before the
    # domain if the domain is 'gmail.com' or 'googlemail.com'.
    $email_parts[0] =~ s/\.//g;
    $normalized_email = sprintf '%s@%s', $email_parts[0], $email_parts[1];
  }
  return normalize_and_hash($normalized_email);
}upload_enhanced_conversions_for_leads.pl

Загрузка расширенного отслеживания конверсий

Добавьте идентификаторы пользователей в ClickConversion.

Ява

// Creates an empty builder for constructing the click conversion.
ClickConversion.Builder clickConversionBuilder = ClickConversion.newBuilder();

// Extracts user email and phone from the raw data, normalizes and hashes it, then wraps it in
// UserIdentifier objects.
// Creates a separate UserIdentifier object for each. The data in this example is hardcoded, but
// in your application you might read the raw data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE of
// hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting more
// than one of these attributes on the same UserIdentifier will clear all the other members
// of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// UserIdentifier incorrectlyPopulatedUserIdentifier =
//     UserIdentifier.newBuilder()
//         .setHashedEmail("...")
//         .setHashedPhoneNumber("...")
//         .build();

ImmutableMap.Builder<String, String> rawRecordBuilder =
    ImmutableMap.<String, String>builder()
        .put("email", "alex.2@example.com")
        // Phone number to be converted to E.164 format, with a leading '+' as required.
        .put("phone", "+1 800 5550102")
        // This example lets you put conversion details as arguments, but in reality you might
        // store this data alongside other user data, so we include it in this sample user
        // record.
        .put("conversionActionId", Long.toString(conversionActionId))
        .put("conversionDateTime", conversionDateTime)
        .put("conversionValue", Double.toString(conversionValue))
        .put("currencyCode", "USD");

// Adds entries for the optional fields.
if (orderId != null) {
  rawRecordBuilder.put("orderId", orderId);
}
if (gclid != null) {
  rawRecordBuilder.put("gclid", gclid);
}
if (adUserDataConsent != null) {
  rawRecordBuilder.put("adUserDataConsent", adUserDataConsent.name());
}

// Builds the map representing the record.
Map<String, String> rawRecord = rawRecordBuilder.build();

// Creates a SHA256 message digest for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
MessageDigest sha256Digest = MessageDigest.getInstance("SHA-256");

// Creates a list for the user identifiers.
List<UserIdentifier> userIdentifiers = new ArrayList<>();

// Creates a user identifier using the hashed email address, using the normalize and hash method
// specifically for email addresses.
UserIdentifier emailIdentifier =
    UserIdentifier.newBuilder()
        // Optional: specify the user identifier source.
        .setUserIdentifierSource(UserIdentifierSource.FIRST_PARTY)
        // Uses the normalize and hash method specifically for email addresses.
        .setHashedEmail(normalizeAndHashEmailAddress(sha256Digest, rawRecord.get("email")))
        .build();
userIdentifiers.add(emailIdentifier);

// Creates a user identifier using normalized and hashed phone info.
UserIdentifier hashedPhoneNumberIdentifier =
    UserIdentifier.newBuilder()
        .setHashedPhoneNumber(normalizeAndHash(sha256Digest, rawRecord.get("phone")))
        .build();
// Adds the hashed phone number identifier to the UserData object's list.
userIdentifiers.add(hashedPhoneNumberIdentifier);

// Adds the user identifiers to the conversion.
clickConversionBuilder.addAllUserIdentifiers(userIdentifiers);UploadEnhancedConversionsForLeads.java

С#

// Adds a user identifier using the hashed email address, using the normalize
// and hash method specifically for email addresses.
clickConversion.UserIdentifiers.Add(new UserIdentifier()
{
    HashedEmail = NormalizeAndHashEmailAddress("alex.2@example.com"),
    // Optional: Specifies the user identifier source.
    UserIdentifierSource = UserIdentifierSource.FirstParty
});

// Adds a user identifier using normalized and hashed phone info.
clickConversion.UserIdentifiers.Add(new UserIdentifier()
{
    HashedPhoneNumber = NormalizeAndHash("+1 800 5550102"),
    // Optional: Specifies the user identifier source.
    UserIdentifierSource = UserIdentifierSource.FirstParty
});

// Adds a user identifier with all the required mailing address elements.
clickConversion.UserIdentifiers.Add(new UserIdentifier()
{
    AddressInfo = new OfflineUserAddressInfo()
    {
        // FirstName and LastName must be normalized and hashed.
        HashedFirstName = NormalizeAndHash("Alex"),
        HashedLastName = NormalizeAndHash("Quinn"),
        // CountryCode and PostalCode are sent in plain text.
        CountryCode = "US",
        PostalCode = "94045"
    }
});UploadEnhancedConversionsForLeads.cs

PHP

// Creates a click conversion with the specified attributes.
$clickConversion = new ClickConversion();

// Extract user email and phone from the raw data, normalize and hash it, then wrap it in
// UserIdentifier objects. Creates a separate UserIdentifier object for each.
// The data in this example is hardcoded, but in your application you might read the raw
// data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE
// of hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting
// more than one of these attributes on the same UserIdentifier will clear all the other
// members of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// $incorrectlyPopulatedUserIdentifier = new UserIdentifier([
//    'hashed_email' => '...',
//    'hashed_phone_number' => '...'
// ]);

$rawRecord = [
    // Email address that includes a period (.) before the Gmail domain.
    'email' => 'alex.2@example.com',
    // Phone number to be converted to E.164 format, with a leading '+' as required.
    'phone' => '+1 800 5550102',
    // This example lets you input conversion details as arguments, but in reality you might
    // store this data alongside other user data, so we include it in this sample user
    // record.
    'orderId' => $orderId,
    'gclid' => $gclid,
    'conversionActionId' => $conversionActionId,
    'conversionDateTime' => $conversionDateTime,
    'conversionValue' => $conversionValue,
    'currencyCode' => 'USD',
    'adUserDataConsent' => $adUserDataConsent
];

// Creates a list for the user identifiers.
$userIdentifiers = [];

// Uses the SHA-256 hash algorithm for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
$hashAlgorithm = "sha256";

// Creates a user identifier using the hashed email address, using the normalize and hash
// method specifically for email addresses.
$emailIdentifier = new UserIdentifier([
    // Uses the normalize and hash method specifically for email addresses.
    'hashed_email' => self::normalizeAndHashEmailAddress(
        $hashAlgorithm,
        $rawRecord['email']
    ),
    // Optional: Specifies the user identifier source.
    'user_identifier_source' => UserIdentifierSource::FIRST_PARTY
]);
$userIdentifiers[] = $emailIdentifier;

// Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
if (array_key_exists('phone', $rawRecord)) {
    $hashedPhoneNumberIdentifier = new UserIdentifier([
        'hashed_phone_number' => self::normalizeAndHash(
            $hashAlgorithm,
            $rawRecord['phone'],
            true
        )
    ]);
    // Adds the hashed email identifier to the user identifiers list.
    $userIdentifiers[] = $hashedPhoneNumberIdentifier;
}

// Adds the user identifiers to the conversion.
$clickConversion->setUserIdentifiers($userIdentifiers);UploadEnhancedConversionsForLeads.php

Питон

# Extract user email and phone from the raw data, normalize and hash it,
# then wrap it in UserIdentifier objects. Create a separate UserIdentifier
# object for each. The data in this example is hardcoded, but in your
# application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier = client.get_type("UserIdentifier")
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
    # Email address that includes a period (.) before the Gmail domain.
    "email": "alex.2@example.com",
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    "phone": "+1 800 5550102",
    # This example lets you input conversion details as arguments,
    # but in reality you might store this data alongside other user data,
    # so we include it in this sample user record.
    "order_id": order_id,
    "gclid": gclid,
    "conversion_action_id": conversion_action_id,
    "conversion_date_time": conversion_date_time,
    "conversion_value": conversion_value,
    "currency_code": "USD",
    "ad_user_data_consent": ad_user_data_consent,
}

# Constructs the click conversion.
click_conversion = client.get_type("ClickConversion")
# Creates a user identifier using the hashed email address, using the
# normalize and hash method specifically for email addresses.
email_identifier = client.get_type("UserIdentifier")
# Optional: Specifies the user identifier source.
email_identifier.user_identifier_source = (
    client.enums.UserIdentifierSourceEnum.FIRST_PARTY
)
# Uses the normalize and hash method specifically for email addresses.
email_identifier.hashed_phone_number = normalize_and_hash_email_address(
    raw_record["email"]
)
# Adds the user identifier to the conversion.
click_conversion.user_identifiers.append(email_identifier)

# Checks if the record has a phone number, and if so, adds a UserIdentifier
# for it.
if raw_record.get("phone") is not None:
    phone_identifier = client.get_type("UserIdentifier")
    phone_identifier.hashed_phone_number = normalize_and_hash(
        raw_record["phone"]
    )
    # Adds the phone identifier to the conversion adjustment.
    click_conversion.user_identifiers.append(phone_identifier)upload_enhanced_conversions_for_leads.py

Руби

# Extract user email and phone from the raw data, normalize and hash it,
# then wrap it in UserIdentifier objects. Create a separate UserIdentifier
# object for each. The data in this example is hardcoded, but in your
# application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
  # Email address that includes a period (.) before the Gmail domain.
  "email" => "alex.2@example.com",
  # Phone number to be converted to E.164 format, with a leading '+' as
  # required.
  "phone" => "+1 800 5550102",
  # This example lets you input conversion details as arguments,
  # but in reality you might store this data alongside other user data,
  # so we include it in this sample user record.
  "order_id" => order_id,
  "gclid" => gclid,
  "conversion_action_id" => conversion_action_id,
  "conversion_date_time" => conversion_date_time,
  "conversion_value" => conversion_value,
  "currency_code" => "USD",
  "ad_user_data_consent" => ad_user_data_consent,
}

click_conversion = client.resource.click_conversion do |cc|
  cc.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
  cc.conversion_date_time = conversion_date_time
  cc.conversion_value = conversion_value.to_f
  cc.currency_code = 'USD'

  unless order_id.nil?
    cc.order_id = order_id
  end

  unless raw_record["gclid"].nil?
    cc.gclid = gclid
  end

  # Specifies whether user consent was obtained for the data you are
  # uploading. For more details, see:
  # https://www.google.com/about/company/user-consent-policy
  unless raw_record["ad_user_data_consent"].nil?
    cc.consent = client.resource.consent do |c|
      c.ad_user_data = ad_user_data_consent
    end
  end

  # Creates a user identifier using the hashed email address, using the
  # normalize and hash method specifically for email addresses.
  # If using a phone number, use the normalize_and_hash method instead.
  cc.user_identifiers << client.resource.user_identifier do |ui|
    ui.hashed_phone_number = normalize_and_hash_email(raw_record["email"])
    # Optional: Specifies the user identifier source.
    ui.user_identifier_source = :FIRST_PARTY
  end

  # Checks if the record has a phone number, and if so, adds a UserIdentifier
  # for it.
  unless raw_record["phone"].nil?
    cc.user_identifiers << client.resource.user_identifier do |ui|
      ui.hashed_phone_number = normalize_and_hash_email(raw_record["phone"])
    end
  end
endupload_enhanced_conversions_for_leads.rb

Перл

# Create an empty click conversion.
my $click_conversion =
  Google::Ads::GoogleAds::V18::Services::ConversionUploadService::ClickConversion
  ->new({});

# Extract user email and phone from the raw data, normalize and hash it,
# then wrap it in UserIdentifier objects. Create a separate UserIdentifier
# object for each.
# The data in this example is hardcoded, but in your application
# you might read the raw data from an input file.
#
# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
# only ONE of hashed_email, hashed_phone_number, mobile_id, third_party_user_id,
# or address-info. Setting more than one of these attributes on the same UserIdentifier
# will clear all the other members of the oneof. For example, the following code is
# INCORRECT and will result in a UserIdentifier with ONLY a hashed_phone_number:
#
# my $incorrect_user_identifier = Google::Ads::GoogleAds::V18::Common::UserIdentifier->new({
#   hashedEmail => '...',
#   hashedPhoneNumber => '...',
# });
my $raw_record = {
  # Email address that includes a period (.) before the Gmail domain.
  email => 'alex.2@example.com',
  # Phone number to be converted to E.164 format, with a leading '+' as
  # required.
  phone => '+1 800 5550102',
  # This example lets you input conversion details as arguments,
  # but in reality you might store this data alongside other user data,
  # so we include it in this sample user record.
  orderId            => $order_id,
  gclid              => $gclid,
  conversionActionId => $conversion_action_id,
  conversionDateTime => $conversion_date_time,
  conversionValue    => $conversion_value,
  currencyCode       => "USD",
  adUserDataConsent  => $ad_user_data_consent
};
my $user_identifiers = [];

# Create a user identifier using the hashed email address, using the normalize
# and hash method specifically for email addresses.
my $hashed_email = normalize_and_hash_email_address($raw_record->{email});
push(
  @$user_identifiers,
  Google::Ads::GoogleAds::V18::Common::UserIdentifier->new({
      hashedEmail => $hashed_email,
      # Optional: Specify the user identifier source.
      userIdentifierSource => FIRST_PARTY
    }));

# Create a user identifier using normalized and hashed phone info.
my $hashed_phone = normalize_and_hash($raw_record->{phone});
push(
  @$user_identifiers,
  Google::Ads::GoogleAds::V18::Common::UserIdentifier->new({
      hashedPhone => $hashed_phone,
      # Optional: Specify the user identifier source.
      userIdentifierSource => FIRST_PARTY
    }));

# Add the user identifiers to the conversion.
$click_conversion->{userIdentifiers} = $user_identifiers;upload_enhanced_conversions_for_leads.pl

Добавьте сведения о конверсии в ClickConversion.

Ява

// Adds details of the conversion.
clickConversionBuilder.setConversionAction(
    ResourceNames.conversionAction(
        customerId, Long.parseLong(rawRecord.get("conversionActionId"))));
clickConversionBuilder.setConversionDateTime(rawRecord.get("conversionDateTime"));
clickConversionBuilder.setConversionValue(Double.parseDouble(rawRecord.get("conversionValue")));
clickConversionBuilder.setCurrencyCode(rawRecord.get("currencyCode"));

// Sets the order ID if provided.
if (rawRecord.containsKey("orderId")) {
  clickConversionBuilder.setOrderId(rawRecord.get("orderId"));
}

// Sets the Google click ID (gclid) if provided.
if (rawRecord.containsKey("gclid")) {
  clickConversionBuilder.setGclid(rawRecord.get("gclid"));
}

// Sets the consent information, if provided.
if (rawRecord.containsKey("adUserDataConsent")) {
  // Specifies whether user consent was obtained for the data you are uploading. See
  // https://www.google.com/about/company/user-consent-policy for details.
  clickConversionBuilder.setConsent(
      Consent.newBuilder()
          .setAdUserData(ConsentStatus.valueOf(rawRecord.get("adUserDataConsent"))));
}

// Calls build to build the conversion.
ClickConversion clickConversion = clickConversionBuilder.build();UploadEnhancedConversionsForLeads.java

С#

// Adds details of the conversion.
clickConversion.ConversionAction =
    ResourceNames.ConversionAction(customerId, conversionActionId);
clickConversion.ConversionDateTime = conversionDateTime;
clickConversion.ConversionValue = conversionValue;
clickConversion.CurrencyCode = "USD";

// Sets the order ID if provided.
if (!string.IsNullOrEmpty(orderId))
{
    clickConversion.OrderId = orderId;
}

// Sets the Google click ID (gclid) if provided.
if (!string.IsNullOrEmpty(gclid))
{
    clickConversion.Gclid = gclid;
}
UploadEnhancedConversionsForLeads.cs

PHP

// Adds details of the conversion.
$clickConversion->setConversionAction(
    ResourceNames::forConversionAction($customerId, $rawRecord['conversionActionId'])
);
$clickConversion->setConversionDateTime($rawRecord['conversionDateTime']);
$clickConversion->setConversionValue($rawRecord['conversionValue']);
$clickConversion->setCurrencyCode($rawRecord['currencyCode']);

// Sets the order ID if provided.
if (!empty($rawRecord['orderId'])) {
    $clickConversion->setOrderId($rawRecord['orderId']);
}

// Sets the Google click ID (gclid) if provided.
if (!empty($rawRecord['gclid'])) {
    $clickConversion->setGclid($rawRecord['gclid']);
}

// Sets the ad user data consent if provided.
if (!empty($rawRecord['adUserDataConsent'])) {
    // Specifies whether user consent was obtained for the data you are uploading. See
    // https://www.google.com/about/company/user-consent-policy for details.
    $clickConversion->setConsent(
        new Consent(['ad_user_data' => $rawRecord['adUserDataConsent']])
    );
}UploadEnhancedConversionsForLeads.php

Питон

# Add details of the conversion.
# Gets the conversion action resource name.
conversion_action_service = client.get_service("ConversionActionService")
click_conversion.conversion_action = (
    conversion_action_service.conversion_action_path(
        customer_id, raw_record["conversion_action_id"]
    )
)
click_conversion.conversion_date_time = raw_record["conversion_date_time"]
click_conversion.conversion_value = raw_record["conversion_value"]
click_conversion.currency_code = raw_record["currency_code"]

# Sets the order ID if provided.
if raw_record.get("order_id"):
    click_conversion.order_id = raw_record["order_id"]

# Sets the gclid if provided.
if raw_record.get("gclid"):
    click_conversion.gclid = raw_record["gclid"]

# Specifies whether user consent was obtained for the data you are
# uploading. For more details, see:
# https://www.google.com/about/company/user-consent-policy
if raw_record["ad_user_data_consent"]:
    click_conversion.consent.ad_user_data = client.enums.ConsentStatusEnum[
        raw_record["ad_user_data_consent"]
    ]upload_enhanced_conversions_for_leads.py

Руби

cc.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
cc.conversion_date_time = conversion_date_time
cc.conversion_value = conversion_value.to_f
cc.currency_code = 'USD'

unless order_id.nil?
  cc.order_id = order_id
end

unless raw_record["gclid"].nil?
  cc.gclid = gclid
end

# Specifies whether user consent was obtained for the data you are
# uploading. For more details, see:
# https://www.google.com/about/company/user-consent-policy
unless raw_record["ad_user_data_consent"].nil?
  cc.consent = client.resource.consent do |c|
    c.ad_user_data = ad_user_data_consent
  end
endupload_enhanced_conversions_for_leads.rb

Перл

# Add details of the conversion.
$click_conversion->{conversionAction} =
  Google::Ads::GoogleAds::V18::Utils::ResourceNames::conversion_action(
  $customer_id, $raw_record->{conversionActionId});
$click_conversion->{conversionDateTime} = $raw_record->{conversionDateTime};
$click_conversion->{conversionValue}    = $raw_record->{conversionValue};
$click_conversion->{currencyCode}       = $raw_record->{currencyCode};

# Set the order ID if provided.
if (defined $raw_record->{orderId}) {
  $click_conversion->{orderId} = $raw_record->{orderId};
}

# Set the Google click ID (gclid) if provided.
if (defined $raw_record->{gclid}) {
  $click_conversion->{gclid} = $raw_record->{gclid};
}

# Set the consent information, if provided.
if (defined $raw_record->{adUserDataConsent}) {
  $click_conversion->{consent} =
    Google::Ads::GoogleAds::V18::Common::Consent->new({
      adUserData => $raw_record->{adUserDataConsent}});
}upload_enhanced_conversions_for_leads.pl

Загрузите ClickConversion

Ява

// Creates the conversion upload service client.
try (ConversionUploadServiceClient conversionUploadServiceClient =
    googleAdsClient.getLatestVersion().createConversionUploadServiceClient()) {
  // Uploads the click conversion. Partial failure should always be set to true.

  // NOTE: This request contains a single conversion as a demonstration.  However, if you have
  // multiple conversions to upload, it's best to upload multiple conversions per request
  // instead of sending a separate request per conversion. See the following for per-request
  // limits:
  // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
  UploadClickConversionsResponse response =
      conversionUploadServiceClient.uploadClickConversions(
          UploadClickConversionsRequest.newBuilder()
              .setCustomerId(Long.toString(customerId))
              .addConversions(clickConversion)
              // Enables partial failure (must be true).
              .setPartialFailure(true)
              .build());UploadEnhancedConversionsForLeads.java

С#

// Uploads the click conversion. Partial failure should always be set to true.
// NOTE: This request contains a single conversion as a demonstration.
// However, if you have multiple conversions to upload, it's best to upload multiple
// conversions per request instead of sending a separate request per conversion.
// See the following for per-request limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload
UploadClickConversionsResponse response =
    conversionUploadService.UploadClickConversions(
        new UploadClickConversionsRequest()
        {
            CustomerId = customerId.ToString(),
            Conversions = { clickConversion },
            // Enables partial failure (must be true).
            PartialFailure = true
        });
UploadEnhancedConversionsForLeads.cs

PHP

// Issues a request to upload the click conversion.
$conversionUploadServiceClient = $googleAdsClient->getConversionUploadServiceClient();
// NOTE: This request contains a single conversion as a demonstration.  However, if you have
// multiple conversions to upload, it's best to upload multiple conversions per request
// instead of sending a separate request per conversion. See the following for per-request
// limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
$response = $conversionUploadServiceClient->uploadClickConversions(
    // Enables partial failure (must be true).
    UploadClickConversionsRequest::build($customerId, [$clickConversion], true)
);UploadEnhancedConversionsForLeads.php

Питон

# Creates the conversion upload service client.
conversion_upload_service = client.get_service("ConversionUploadService")
# Uploads the click conversion. Partial failure should always be set to
# True.
# NOTE: This request only uploads a single conversion, but if you have
# multiple conversions to upload, it's most efficient to upload them in a
# single request. See the following for per-request limits for reference:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
response = conversion_upload_service.upload_click_conversions(
    customer_id=customer_id,
    conversions=[click_conversion],
    # Enables partial failure (must be true).
    partial_failure=True,
)upload_enhanced_conversions_for_leads.py

Руби

response = client.service.conversion_upload.upload_click_conversions(
  customer_id: customer_id,
  conversions: [click_conversion],
  # Partial failure must be true.
  partial_failure: true,
)

if response.partial_failure_error
  puts "Partial failure encountered: #{response.partial_failure_error.message}"
else
  result = response.results.first
  puts "Uploaded click conversion that happened at #{result.conversion_date_time} " \
    "to #{result.conversion_action}."
endupload_enhanced_conversions_for_leads.rb

Перл

# Upload the click conversion. Partial failure should always be set to true.
#
# NOTE: This request contains a single conversion as a demonstration.
# However, if you have multiple conversions to upload, it's best to
# upload multiple conversions per request instead of sending a separate
# request per conversion. See the following for per-request limits:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
my $response =
  $api_client->ConversionUploadService()->upload_click_conversions({
    customerId  => $customer_id,
    conversions => [$click_conversion],
    # Enable partial failure (must be true).
    partialFailure => "true"
  });upload_enhanced_conversions_for_leads.pl

Проверьте свои загрузки

Следующие шаги

Настройка

Поиск неисправностей